• 한국식품과학회지
• /
• 제23권5호
• /
• pp.578-581
• /
• 1991

EPA 및 DHA가 각간 25, 10% 함유된 어유에 상업용 레시틴을 첨가하여 어유의 산화안정성에 미치는 레시틴의 산화 방지효과를 AOM 시험, Oven 시험, 중합물 시험, 색도 시험 등을 통해서 비교하였다. 레시틴을 첨가한 산화안정성은 제품의 종류에 따라 산화안정성에 차이는 있었으나 첨가량이 증가할수록 산화안정성이 증가됨을 알 수 있었다. 가장 우수한 항산화성을 갖고 있었던 레시틴(III)을 1, 5, 10%을 첨가함에 따라 AOM 조건에서 유도시간이 각각 310, 620, 840%로 증가하였다. 또한 레시틴(III)을 10% 첨가한 시료구에서는 AOM 조건에서 10시간까지 중합물이 생성되지 않았으나 색도는 저장시간이 경과할수록 증가하였고 고온에서 더욱 가속화되었다.

• KSBB Journal
• /
• 제23권4호
• /
• pp.340-344
• /
• 2008

CiP를 이용한 유기합성은 주로 유기용매와 완충용액을 섞어서 반응을 한다. 하지만 단순히 유기용매 상에서 효소의 활성도를 측정한 것이 아니라, 과산화수소가 있을 경우에 효소의 활성도를 측정한 결과는 예상과는 다르게 순수한 완충용액에서 보다 유기용매를 포함하고 있는 것이 더 높게 나타났다. 또한 유기용매의 비율을 증가가 될수록 효소의 활성도가 더 높게 나타났으며, 특히 2-propanol이 33%가 포함이 된 경우에는 순수한 완충용액보다 효소의 활성도가 크게 증가가 되는 것을 관찰을 할 수가 있었다. 이러한 효소의 활성도가 유기용매가 포함이 된 조건에서 높게 나는 이유는 유기용매가 CiP에 의해 생성된 반응성이 높은 라디칼을 포집을 하여서, CiP의 활성 부위인 heme의 파괴를 막는 것에 크게 기여하는 것으로 판단이 되었다.

• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.484-488
• /
• 2003

Polycarbosilanes containing diacetylene and organosilacyclic groups, such as poly(1,1-diethynyl-1-silacyclopent-3-ene), poly(1,1-diethynyl-3-triethylsilyl-1-silacyclopent-3-ene), and poly(1,1-diethynyl-1- silacyclobutane), were synthesized by the Glaser oxidative coupling polymerization reactions of 1,1-diethynyl-1-silacyclopent-3-ene, 1,1-diethynyl-3-triethylsilyl-1-silacyclopent-3-ene, and 1,1-diethynyl-1-silacyclobutane, respectively. These materials are almost insoluble in usual organic solvents such as $CHCl_3$ and THF. The polymers were characterized by using several spectroscopic methods in solid state. FTIR spectra of all the polymeric materials show that the characteristic C≡C stretching frequencies appear at 2146-2170 $cm^{-1}$, in particular. The polymers in the solid state show that the strong maximum excitation peaks appear at 255-257 nm and the strong maximum fluorescence emission bands at 401-402 nm. About 71-87% of the initial polymer weights remain at 400 ℃ in nitrogen according to thermogravimetric analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 센서 박막재료
• /
• pp.6-10
• /
• 2001

We synthesized polypyrrole (PPy) nanotubules by oxidative polymerization of the pyrrole monomer on the pore of a polycarbonate membrane. The electrochemical behavior was investigated using cyclic voltammetry and AC impedance. The redox potential was about -0.5 V vs. Ag/AgCl reference electrode, while the potential was about 0 V for electro-synthesized PPy film. It is considered as the backbone grows according to the pore wall. Therefore, it is possible to be arranged regularly. That leads to improvement in the electron hopping. The AC impedance plot gave a hint of betterment of mass transport. PPy nanotubules have improved in mass transport, or diffusion. That is because the diffusion occurs through a thin pore wall of PPy nanotubules. The kinetic parameter of PPy nanotubules enzyme electrode with glucose solution was evaluated. The formal Michaelis constant and maximum current calculated by computer were about 23.8 mmol $dm^{-3}$ and $440\;{\mu}A$ respectively. Obviously, an affinity for the substrate and current response of the PPy nanotubules enzyme electrode are rather good, comparing with that of PPy film. What is more, the enzyme electrode is sensitive to blood sugar of a diabetic serum despite an obstruction of ascorbic acid, oxygen, some protein and/or hormone.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1305-1310
• /
• 2007

A conjugated spirocyclic polymer was synthesized via the cyclopolymerization of 1,1-dipropargyl-1- silacyclohexane with various transition metal catalysts. The monomer, 1,1-dipropargyl-1-silacyclohexane was synthesized by Grignard reaction of 1,1-dichloro-1-silacyclohexane with propargyl magnesium bromide. This polymerization proceeded well to give the corresponding poly(1,1-dipropargyl-1-silacyclohexane). The catalytic activity of WCl6 was found to be similar with that of MoCl5. The structure of polymer having the conjugated backbone with silacyclohexane moieties was characterized by such instrumental methods as NMR (1H-, 13C-), IR, and UV-visible spectroscopies. The resulting polymers were mostly yellow or light-brown powders, depending on the catalyst systems used. This polymer was completely soluble in halogenated and aromatic hydrocarbons such as chloroform, 1,2-dichloromethane, benzene, toluene, and chlorobenzene, etc. The thermal and oxidative stabilities of polymer were also studied and discussed.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.927-933
• /
• 2011

Conducting polyaniline-poly($\varepsilon$-caprolactone) polymer composites were synthesized via in situ deposition techniques. By dissolving different weight percentages of poly($\varepsilon$-caprolactone) (PCL) (10%, 20%, 30%, 40%, and 50%), the oxidative polymerization of aniline was achieved using ammonium persulfate as an oxidant. FTIR, UV-vis spectra, and X-ray diffraction studies support a strong interaction between polyaniline (PANI) and PCL. Structural morphology of the PANI-PCL polymer composites was studied using scanned electron microscopy (SEM) and transmittance electron microscopy (TEM), and thermal stability was analyzed by thermogravimetric analysis (TGA) technique. The temperature-dependent DC conductivity of PANI-PCL polymer composite films was studied in the range of 305-475 K, which revealed a semiconducting behavior in the transport properties of the polymer films. Conductivity increased with the increase of PCL in below critical level, however conductivity of the polymer film was decreased with increase of PCL concentration higher than the critical value.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.454-458
• /
• 2009

Polypyrrole (PPy) nanotubes have been synthesized by chemical oxidative polymerization of pyrrole within the pores of polycarbonate membrane using the technology of diffusion of solutes. The nanotubes array prepared by the proposed method can be considered as nanoelectrode ensembles (NEEs). An amperometric uric acid sensor based on PPy NEEs has been developed and used for determination of uric acid in human serum samples. The electrode can direct response to uric acid at potential of 0.60V vs. SCE with wide linear range of $1.52{\times}10^{-6}\;to\;1.54{\times}10^{-3}\;M.\;The\;detection\;limit\;is \;3.02{\times}10^{-7}$ M. This sensor has been used to determine uric acid in real serum samples. PPy NEEs is thought of as a good application in the foreground.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.200-203
• /
• 2008

A conducting polymer layer was introduced into the pore surface of mesoporous carbon via vapor infiltration of a monomer and subsequent chemical oxidative polymerization. The polypyrrole, conducting polymer has attracted considerable attention due to the high electrical conductivity and stability under ambient conditions. The mesoporous carbon-polypyrrole nanocomposite exhibited the retained porous structure, such as mesoporous carbon with a three-dimensionally connected pore system after intercalation of the polypyrrole layer. In addition, the controllable addition of pyrrole monomer can provide the mesoporous carbon-polypyrrole nanocomposites with a tunable amount of polypyrrole and texture property. The polypyrrole layer improved the electrode performance in the electrochemical double layer capacitor. This improved electrochemical performance was attributed to the high surface area, open pore system with three-dimensionally interconnected mesopores, and reversible redox behavior of the conducting polypyrrole. Furthermore, the correlation between the amount of polypyrrole and capacitance was investigated to check the effect of the polypyrrole layer on the electrochemical performance.

• 분석과학
• /
• 제19권3호
• /
• pp.211-217
• /
• 2006

Diphenyl amine (DPA) was polymerized inside the channels of the mesoporous silica (MCM-41). MCM-41 (C) and MCM-41 (D) were prepared with cetyltrimethyl ammonium bromide (CTAB) and dodecyltrimethyl ammonium bromide (DTAB), respectively and used as hosts. Initially, the self assembly of DPA inside the pores of MCM-41 was made in ${\beta}$-naphthalene sulfonic acid (NSA) medium and subsequently poly (diphenylamine), PDPA was formed by oxidative polymerization. $N_2$ adsorption-desorption measurements of PDPA loaded MCM-41 (C) and MCM-41 (D) show variations in pore volume and surface area between them. A tubular form of poly (diphenylamine), PDPA was envisaged to form in the pores of MCM-41 and supported by high resolution transmission microscopy. The presence of PDPA inside the channel of MCM-41 was further confirmed by FTIR spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction.

• Clinical and Experimental Pediatrics
• /
• 제51권1호
• /
• pp.54-61
• /
• 2008

목 적 : 특발성 신증후군의 연구를 위하여 병태생리 및 임상소견과 유사한 실험적 puromycin aminonucleoside(PAN) 신증을 이용하는데 본 연구는 배양한 사구체 상피세포에 대한 PAN의 영향을 통하여 신증후군의 주 원인 병태생리인 단백뇨의 기전을 밝히고자 하였다. 방 법 : 사구체 상피세포를 배양한 후 다양한 농도의 PAN과 항산화제를 투여하여 전자현미경관찰, 반응성 산소종 투과율 변화, confocal microscopy 등을 통하여 족세포성분의 변화를 관찰하였다. 결 과 : 사구체 상피세포의 초고배율소견에서 PAN에 의해 세포간극이 벌어지고 표면의 미세돌기가 단축되는 변화를 볼 수 있었다. 이러한 세포간극의 변화는 세포막부분의 ZO-1에 대한 면역형광검사에서도 확인할 수 있었다. DCF-DA로 측정한 반응성 산소종은 PAN에 의하여 농도에 따라 투여 2시간에 이미 유의한 증가를 보이나, 이러한 변화는 항산화제인 EGCG, probucol, vitamin C에 의해 감소하였다. 또한, 세포단층모델에서 투과율은 PAN에 의하여 농도에 따라 증가하나 항산화제에 의해 증가가 억제되었다. 세포골격구조인 ${\alpha}-actinin$은 사구체 상피세포의 세포질과 바깥 세포막부분으로 actin과 같이 분포하나 고농도의 PAN에 의해 세포질 바깥쪽의 일부분에 집중하는 형상으로 변하였다. 그러나 이러한 변화는 항산화제인 vitamin C의 처치에 의해 예방될 수 있었다. 세극막성분인 ZO-1는 고농도의 PAN에 의해 안쪽으로 이동하고 집중하는 형상으로 변하였으나, vitamin C의 처치에 의해 예방되었다. 이와 함께 ${\alpha}-actinin$과 ZO-1은 PAN에 의해 단백양이 감소하였으나 이는 항산화제에 의해 예방할 수 있었다. 결 론 : PAN은 사구체 상피세포의 반응성 산소종 생성을 증가시키고, 구조성분의 변화를 통하여 형태학적인 변화를 초래하며 이는 투과율의 증가로 나타났다. 이러한 변화들은 항산화제에 의해 어느 정도 억제할 수 있었음으로, PAN은 생체 외 사구체 상피세포에 산화스트레스기전을 통하여 구조적 변화와 이에 따른 단백뇨를 유발시키는 것으로 사료된다.