• 펄프종이기술
• /
• 제36권4호
• /
• pp.49-59
• /
• 2004

This study was carried out to obtain the basic data for producing higher functional coating agents for pulp mold by evaluating various kinds of starch derivatives. At that time, four kinds of starch derivatives were manufactured for making coating agents respectively. Physical properties of coated paperboards were tested. Conclusions obtained from this results were as follows. The water and oil resistance of hydroxypropylated, cyanoethylated and carboxymethy­lated starch were high when degree of molar substitution(DS) of propylene oxide, acrylonitrile and sodium monochloroacetate were 0.18, 0.07 and 0.009, respectively. Also, the those of crosslinked starch were high when degree of crosslinking of epichlorohydrin was 0.02. Consequently, $8\%$ solution of carboxymethylated starch made with DS 0.009 of monochloroacetate was the best among coating agents from starch derivatives men­tioned above.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.1-12
• /
• 2009

Presently, the semiconductor industry has the chronic problem. In the semiconductor industry, it has the semiconductor wafer, a package, the optical filter cut by using the saw blade, the mold, a laser etc. The cutting technique has the difficulty due to the rising of the production cost by the wearing of mold, the poor quality problem due to generated heat at the moment of cutting procedure and curve cutting etc. The goal of this time of national research and development project is develop the apparatus for solving the problem that the existing cutting technique has. The technology is so called waterjet abrasive method. This technology will be mainly applied to cut a semiconductor package and a wafer. Two important things to be considered are ripple effect(in other words, the scale of a market) and simplicity of an application.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.455-458
• /
• 2006

The oak and pine charcoal were used to develop the internal packaging raw material for maintaining the freshness of vegetables and fruits, and to investigate the possibility in the application for pulp mold packaging. The effects of the charcoal type, species, particle size, and grammage on the adsorption efficiency of ethylene gas were studied. White charcoal has superior ethylene gas adsorption performance to those of black charcoal. Pine charcoal was superior to oak charcoal in the ethylene gas adsorption. Higher gas adsorption was obtained by the higher grammage sheet. The difference in the adsorption efficiency was not significant between ONP and KOCC.

• 한국산업융합학회 논문집
• /
• 제27권5호
• /
• pp.1327-1333
• /
• 2024

In this study, the formability was predicted using a finite element method-based forming simulation program to manufacture ring-shaped parts with multiple rectangular grooves through a hot forging process. The hot forging process was designed into four processes. In the first and second processes, the disk-shaped raw material was transformed into the shape of a bowl. In the third process, the inner lower part of the bowl was sheared to form a ring shape. In the fourth process, the outer surface of the upper part of the ring was partially sheared to create multiple rectangular grooves. Since the lower mold for the first and second processes is the same, mold costs can be reduced. In the third process, burrs are expected to occur on the shear surface, so burr removal work is required in the actual process. The fourth process requires more than one forging operation because the rectangular groove cannot be made uniformly in one operation.

• 산업공학
• /
• 제25권1호
• /
• pp.52-63
• /
• 2012

Up-to-date enlargement of the scale of global outsourcing has brought about the need of systematic and efficient tools for competitive supplier discovery located in various areas. A web-based business supporting system, referred to as Excellent Manufacturer Scouting System(EMSS), is being developed to serve core business functions including supplier discovery, negotiation, and collaboration between overseas buyers and domestic suppliers throughout the process of supply chain formation. In this paper, a supplier assessment model devoted to evaluation of core manufacturing capability is proposed by targeting small and medium sized mold companies. The assessment model will eventually be loaded to EMSS. Even if many well-designed models for supplier assessment have been presented in literature, most of them limit the evaluation criteria to somewhat general information on a given supplier, such as cost, delivery time, quality, rather than core manufacturing capability itself. This research is pioneering work on supplier assessment from the viewpoint of manufacturability. The proposed assessment model classifies assessment indices into six criteria, which have been drawn by intensive survey and analysis of the mold industry. Actual assessment indices for each criterion are also presented along with an exemplary evaluation result.

• 펄프종이기술
• /
• 제33권4호
• /
• pp.21-27
• /
• 2001

Korean traditional paper (Hanji) making technology has adopted two kinds of sheet forming processes, which called "Oebal-choji": and "Ssangbal-choji". The sheet forming process of Oebal-choji is an original method developed in Korea. At first, paper stock is dipped onto the mold and flow away in the forward direction. Then, paper stock is scooped again and rhythmically rocked from side to side, this work is repeated several times. Through this operation the fibers intertwine and paper layers are formed. Ssangbal-choji is almost same as the Nagashizuki, which used in Japan. In this method, paper stock is scooped onto the mold and rhythmically rocked backwards and forwards several times, the water drains slowly through the bamboo screen and then sheet is formed. Tamezuki method is used in Japan and China. This is a method in which the mold is dipped into the paper stock once and left to drain. In the Ssangbal-choji and Nagashizuki methods, the most of excess solution is cast out while in the Tamezuki all of it is allowed to drain through the mold. This study was carried out to investigate the physical properties of the Hanjis that were made by Oebal-choji, Ssangbal-choji, Nagashizuki, and Tamezuki sheet forming processes. The results were follows; Physical properties of the Oebal-choji Hanji were better than those of Ssangbal-choji, Nagashizuki, and Tamezuki. Oebal-choji Hanji made little difference of paper strength between MD and CD, but Ssangbal-chjo and Nagashizuki Hanjis made wide difference. And there are no difference of paper strength between MD and CD on the Tamezuki Hanji. On the confocal laser scanning microscopy (CLSM) observation of the Hanjis, Oebal-choji made well crossed fiber orientation than those of other forming processes.r forming processes.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.471-474
• /
• 2006

Environment-friendly shock-absorbing materials were made of wastepaper such as old corrugated containers (OCC) and old newspapers (ONP) with a vacuum forming method. The plate-like cushioning materials made of OCC and ONP respectively by vacuum forming showed superior shock-absorbing properties with lower elastic moduli compared to expanded polystyrene (EPS) and pulp mold. Even though the plate-like materials had many free voids in their fiber structure, their apparent densities (${\approx}0.1g/cm^{3}$) were a little higher than that of EPS (${\approx}0.03g/cm^{3}$) and much lower than that of pulp mold (${\approx}0.3g/cm^{3}$). However, the elastic moduli of the cushioning materials made of wastepaper were much lower than that of EPS or pulp mold. This finding implies that the cushioning materials made of OCC fibers containing more lignin than ONP show better shock-absorbing properties than ONP Moreover, the cushioning materials made of OCC and ONP respectively showed greater porosity than pulp mold. The addition of cationic starch to the cushioning materials contributed to an increase in the elastic modulus to the same level as that of EPS. Furthermore, the deterioration in fiber quality by repeated use of wastepaper played a great role in improving shock-absorbing ability.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.57-61
• /
• 2009

In recently industry, with the miniaturization and high-precision of machine part, the development of mold manufacturing technology for mass production is accompanied by the development of new industrial field such as IT, NT and BT. The metal injection molding(MIM) process combines the well-known thermoplastic injection and powder metallurgy technologies to manufacture small parts for IT, NT, BT industrial. In this study, the bar type MIM mold with a 800um thickness is made for influence of feedstock material and injection parameter through an experiment.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.65-71
• /
• 2001

The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm.

• 소성∙가공
• /
• 제15권1호
• /
• pp.65-70
• /
• 2006

In recent industry, with the miniaturization and high-precision of machine part, the development of mold manufacturing technology for mass production is accompanied by the development of new technology such as IT and BT In this study, the spiral type injection mold with a $200{\mu}m$ thickness is made to. investigating the influence of injection molding parameter and the flow length is measured through an experiment. Besides, Taguchi method is used in this experiment and the obtained data are analyzed using ANOVA method.