소성∙가공 (Transactions of Materials Processing)

  • 제15권1호
  • /
  • Pages.65-70
  • /
  • 2006
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

스파이럴 형상 미세사출품의 성형 인자에 대한 실험적 연구

An Experimental Study on Molding Factor for Spiral Type Micro Injection Product

  • 정우철 (생산기술연구원 정밀금형팀) ;
  • 허영무 (생산기술연구원 정밀금형팀) ;
  • 신광호 (생산기술연구원 정밀금형팀) ;
  • 윤길상 (생산기술연구원 정밀금형팀) ;
  • 장성호 (생산기술연구원 정밀금형팀) ;
  • 김무연 (생산기술연구원 정밀금형팀)
  • 발행 : 2006.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In recent industry, with the miniaturization and high-precision of machine part, the development of mold manufacturing technology for mass production is accompanied by the development of new technology such as IT and BT In this study, the spiral type injection mold with a $200{\mu}m$ thickness is made to. investigating the influence of injection molding parameter and the flow length is measured through an experiment. Besides, Taguchi method is used in this experiment and the obtained data are analyzed using ANOVA method.

키워드

참고문헌

  1. 허영무, 신광호, 윤길상, 정우철, 2004, 기능성고분자 성형용 마이크로금형 시스템, 한국소성가공학회 추계학술대회 논문집, pp. 267-270
  2. G. Charyssolouris, M. Guillot, 1990, A compassion of statical and A1 approaches to the selection of process parameters in intelligent machining, ASME J Eng. Ind. Vol. 112, pp. 122-131 https://doi.org/10.1115/1.2899554
  3. 박성현, 1998, 현대실험계획법, 민영사
  4. 박성현, 1990, 응용실험계획법, 영지문화사
  5. 백운봉, 1989, 실험계획법, 박영사
  6. J. Paulo Davim, 2003, Study of drilling metal matrix composites based on Taguchi technique, Journal of Materials Processing Technology, Vol. 132, pp. 250-254 https://doi.org/10.1016/S0924-0136(02)00935-4
  7. http://www.mitiplas.com
  8. 윤영민, 김재환, 최승목, 2003, 다구찌법을 이용한 소음저감용 ER 패널의 파라미터 설계, 한국소음진동공학회, 추계학술대회 논문집, pp. 638-642

피인용 문헌

  1. Processability and Mechanical Characteristics of Glass Fiber and Carbon Fiber Reinforced PA6 for Reinforcement Content vol.50, pp.3, 2015, https://doi.org/10.7473/EC.2015.50.3.184
  2. Influence of Molding Conditions on Environmental Stress Cracking Resistance of Injection Molded Part vol.20, pp.2, 2011, https://doi.org/10.5228/KSTP.2011.20.2.173