• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.833-836
• /
• 1999

In this paper, a wideband MMIC LNA was designed using low Q matching network. Gains of 9.8~12.2 ㏈, and noise figures of 1.7~2.1 ㏈ were obtained from the fabricated wideband MMIC LNA in the frequency ranges of 1.5~2.5㎓. And maximum output power of 10.83 ㏈m were obtained at the center frequency of 2 ㎓. The chip size of the fabricated wideband MMIC low noise amplifier is 1.4 mm$\times$1.4 mm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1223-1229
• /
• 2004

A variable-gain low-voltage low noise amplifier MMIC operating at 5GHz frequency band is designed and implemented using the ETRI 0.5$\mu\textrm{m}$ GaAs MESFET library process. This low noise amplifier is designed to have the variable gain for adaptive antenna array combined in HIPERLAN/2. The feedback circuit of a resistor and channel resistance controlled by the gate voltage of enhancement MESFET is proposed for the variable-gain low noise amplifier consisted of cascaded two stages. The fabricated variable gain amplifier exhibits 5.5GHz center frequency, 14.7dB small signal gain, 10.6dB input return loss, 10.7dB output return loss, 14.4dB variable gain, and 2.98dB noise figure at V$\_$DD/=1.5V, V$\_$GGl/=0.4V, and V$\_$GG2/=0.5V. This low noise amplifier also shows-19.7dBm input PldB, -10dBm IIP3, 52.6dB SFDR, and 9.5mW power consumption.

• Journal of information and communication convergence engineering
• /
• v.15 no.2
• /
• pp.112-116
• /
• 2017

In this work, we demonstrated a low noise and high linearity low noise amplifier (LNA) monolithic microwave integrated circuit (MMIC) with novel active bias circuit for LTE applications. The device technology used in this work relies on a process involving a $0.25-{\mu}m$ GaAs pseudomorphic high electron mobility transistor (PHEMT). The LNA MMIC with a novel active bias circuit has a small signal gain of $19.7{\pm}1.5dB$ and output third order intercept point (OIP3) of 38-39 dBm in the frequency range 1.75-2.65 GHz. The noise figure (NF) is less than 0.58 dB over the full bandwidth. Compared with the characteristics of the LNA MMIC without using the novel active bias circuit, the OIP3 is improved about 2-3 dBm. The small signal gain and NF showed no significant change after using the active bias circuit. The novel active bias circuit indeed improves the linearity performance of the LNA MMIC without degradation.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.129-132
• /
• 2000

In this paper, a 1.8㎓ low noise amplifier was designed and simulated using 0.2$\mu\textrm{m}$ Si CMOS process. Noise characteristics and s parameters were extracted for the 300$\mu\textrm{m}$ gate width and 0.25$\mu\textrm{m}$ gate length NMOS transistors. For high available power gain, each stage was designed cascode type. It revealed available power gain of 23.5dB, noise figure of 2.0dB, power consumption of 15㎽ at 2.5V. It was shown that designed low noise amplifier had good RF performance. Designed Si CMOS LNA is expected to be used for RF front-end in transceiver.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.893-899
• /
• 2000

A 900 MHz low-noise amplifier(LNA) with a measured noise figure of 4.8 dB and an associated gain of 13.2 dB was fabricated in a 0.65 $\mu$m CMOS. The inductive source architecture of offers the possibility of achieving the best noise performance. At 900 MHz, the fabricated LNA dissipates 39 mW from a single 3 V power supply including the bias circuitry and provides -26dB input return loss, -17 dB output return loss, and an input 1-dB compression level of -12 dBm.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.319-322
• /
• 1998

A 20 GHz 2-stage MMIC (Monolithic Microwave Integrated Circuits) LNA(Low Noise Amplifiers) has been designed. The pHEMT with gate length of 1.15 um has been used to provide ultra low noise and high gain amplification. Series and Shunt feedback circuits were interted to ensured high stability over frequency range of DC to 60 GHz. The size of designed MMIC LNA is 2285um x 2000um(4.57mm2). The simulated noise figure of MMIC LNA is less than 1.7 dB over frequency range of 20 GHz to 21 GHz.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.354-357
• /
• 2003

The low noise and balanced amlifier has been designed by using PBG. Usually balanced LNAis used to matching the input and output mismatching that caused by matching the low noise matching point. And the PBG supresses the harmoincs. This paper proposed balanced LNA by using PBG. And this configuration improve the performance - noise figure, VSWR.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.3
• /
• pp.24-29
• /
• 1978

A new mode of operation is observed in this paper which involves the tractive wave interaction between a cyclotron ways and a synchronous electron beam. The wave interaction is analysed by using both electron dynamics and coupled-mode methods. The gain expression derived from the analysis prognoses a new type of improved uhf amplifier with low noise and high power. Based on the theoretical analysis, experimental tubes have been designed, constructed arid exporimented. As a result, a low noise amplifier is anticipated well into millimeter lave region.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.283-288
• /
• 2008

A post-linearization technique for the differrential CMOS LNA is presented. The proposed method uses an additional cross-coupled common-source FET pair to cancel out the third-order intermodulation ($IM_3$) current of the main differential amplifier. This technique is applied to enhance the linearity of CMOS LNA using $0.18-{\mu}m$ technology. The LNA achieved +10.2 dBm IIP3 with 13.7 dB gain and 1.68 dB NF at 2 GHz consuming 11.8 mA from a 1.8-V supply. It shows IIP3 improvement by 6.6 dB over the conventional cascode LNA without the linearizing circuit.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.1
• /
• pp.23-28
• /
• 2016

In this paper, a Multi-Band Ku-band down converter was designed for reception of multi-band digital satellite broadcasting. The Multi-band low-nose down converter was designed to form four local oscillator frequencies (9.75, 10, 10.75 and 11.3GHz) representing a low phase noise due to VCO-PLL with respect to input signals of 10.7 to 12.75GHz and 3-stage low noise amplifier circuit by broadband noise matching, and to select an one band of intermediate frequency (IF) channels by digital control. The developed low-noise downconverter exhibited the full conversion gain of 64dB, and the noise figure of low-noise amplifier was 0.7dB, the P1dB of output signal 15dBm, and the phase noise -73dBc@100Hz at the band 1 carrier frequency of 9.75GHz. The low noise block downconverter (LNB) for receiving four-band digital satellite broadcasting designed in this paper can be used for satellite broadcasting of vessels navigating international waters.