• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.4
• /
• pp.731-751
• /
• 2021

The Internet of Things is a huge group of devices communicating each other and the interconnection of objects in the network is a basic requirement. Choosing a reliable device is critical because malicious devices can compromise networks and services. However, it is difficult to create a trust management model due to the mobility and resource constraints of IoT devices. For the centralized approach, there are issues of single point of failure and resource expansion and for the distributed approach, it allows to expand network without additional equipment by interconnecting each other, but it has limitations in data exchange and storage with limited resources and is difficult to ensure consistency. Recently, trust management models using fog nodes and blockchain have been proposed. However, blockchain has problems of low throughput and delay. Therefore, in this paper, a trust management model for selecting reliable devices in a fog-based IoT environment is proposed by applying IOTA, a blockchain technology for the Internet of Things. In this model, Directed Acyclic Graph-based ledger structure manages trust data without falsification and improves the low throughput and scalability problems of blockchain.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.352-359
• /
• 2021

This paper presents the definition and importance of ship-centric direct communication concerning ship safety of maritime autonomous and unmanned ships. It also proposes the concept of MX-S2X communication based on high frequency for wide-bandwidth technology and describes the design and simulation result for the physical layer of MX-S2X. It considered high-speed communication as well as overcoming maritime multi-path fading required to be resolved in the marine environment. The physical layer of MX-S2X communication was designed to overcome the occurrence of error-floor caused by multi-path fading even with receiving sufficient signal strength. To this purpose, a performance analysis was conducted on the physical layer by applying the channel model of the actual maritime communication environment. As a result of the performance analysis of the MX-S2X physical layer, it was confirmed that the BER error-floor observed in the VDE physical layer test was overcome, and it operated within the SNR 2dB degradation range compared to the AWGN channel. It is expected that this will show enough performance suitable for short-distance ship-centered direct communication and can be used for direct communication of maritime autonomous ships, unmanned ships, and group navigation of themshortly.

• Journal of Convergence for Information Technology
• /
• v.9 no.6
• /
• pp.153-163
• /
• 2019

The purpose of this study is to research the effect of life satisfaction on young people at an early age and the impact of media on behavioral aggressiveness during this process. To this end, a group of primary schools located in Jiangnan and Jiangbei in the Seoul area and the Nanjing Road in the city were selected and 290 early youths from grades 4-6 of elementary school were chosen as specimens of structural equations. The results indicate that firstly, the personal causes of early youth have a positive (+) effect on the self-esteem life satisfaction and negative (-) impact on liquidity aggressiveness. Secondly, depression has a negative impact on life satisfaction, while action aggressiveness has no effect. Thirdly, the mobility aggression of early youth has a negative impact on life satisfaction (-), and there is a partial media relationship between self-esteem and life satisfaction. However, there is no media relationship between depression and life satisfaction. Based on the above research results, the project of improving youth early life satisfaction and reducing mobile aggression was proposed.

• Journal of Ginseng Research
• /
• v.45 no.1
• /
• pp.134-148
• /
• 2021

Background: Lung cancer has a high incidence worldwide, and most lung cancer-associated deaths are attributable to cancer metastasis. Although several medicinal properties of Panax ginseng Meyer have been reported, the effect of ginsenosides Rk1 and Rg5 on epithelial-mesenchymal transition (EMT) stimulated by transforming growth factor beta 1 (TGF-β1) and self-renewal in A549 cells is relatively unknown. Methods: We treated TGF-β1 or alternatively Rk1 and Rg5 in A549 cells. We used western blot analysis, real-time polymerase chain reaction (qPCR), wound healing assay, Matrigel invasion assay, and anoikis assays to determine the effect of Rk1 and Rg5 on TGF-mediated EMT in lung cancer cell. In addition, we performed tumorsphere formation assays and real-time PCR to evaluate the stem-like properties. Results: EMT is induced by TGF-β1 in A549 cells causing the development of cancer stem-like features. Expression of E-cadherin, an epithelial marker, decreased and an increase in vimentin expression was noted. Cell mobility, invasiveness, and anoikis resistance were enhanced with TGF-β1 treatment. In addition, the expression of stem cell markers, CD44, and CD133, was also increased. Treatment with Rk1 and Rg5 suppressed EMT by TGF-β1 and the development of stemness in a dose-dependent manner. Additionally, Rk1 and Rg5 markedly suppressed TGF-β1-induced metalloproteinase-2/9 (MMP2/9) activity, and activation of Smad2/3 and nuclear factor kappa B/extra-cellular signal regulated kinases (NF-kB/ERK) pathways in lung cancer cells. Conclusions: Rk1 and Rg5 regulate the EMT inducing TGF-β1 by suppressing the Smad and NF-κB/ERK pathways (non-Smad pathway).

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.705-712
• /
• 2021

The purpose of this study is to propose the features of autonomous DRT UX design based on level 5 autonomous vehicle applicable in 2027. As the scope of the study, the system focused on the interaction between the elderly and the in/outside of the vehicle, and the level 5 autonomous vehicle was the subject of the study. As of 2021, the targets for application were set from 60s to 90s. This study is different from previous studies in that it is a study on the features of autonomous DRT UX design that derives practical insights through direct communication with the elderly. As a research method, autonomous vehicle and DRT were theoretically considered through literature research, and based on this, cases of autonomous vehicle and DRT were analyzed. As a case study, generalization was conducted through interviews with the elderly, test-drive of autonomous vehicle, video production, survey, and VR test-drive of autonomous vehicle for the elderly. Ten features of autonomous DRT UX design were derived through focus group interview(FGI), and the derived features were classified into reservation, get on, input, driving, emergency, and get off. Through this study, I hope that it will contribute to improving mobility of the elderly and further accelerate the practical use of autonomous DRT.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.165-175
• /
• 2021

Purpose: The purpose of this study is to quantitatively present the carbon dioxide(CO₂) emission change according to the application of autonomous driving technology at the network level for waste vehicles in the metropolitan area. Method: The target year was set to 2030, and the analysis method estimated the carbon dioxide (CO₂) emissions for each road link through user equilibrium assignment when unapplied scenario. The application scenario performed traffic assignment using route data on the premise that the group was running in accordance with the application of autonomous driving technology to waste vehicles. In addition, the other means estimated the carbon dioxide emissions through user balance allocation by reflecting the results of the waste vehicle allocation. Result: As a result of the analysis, carbon dioxide(CO₂) emissions were found to be reduced by about 56.9ton/day from the national network level, and the Seoul metropolitan area was analyzed to be reduced by about 54.7ton/day. Conclusion: This study quantitatively presented environmental impacts among various social effects that autonomous driving technology will bring, and in the future, development of various analytical methodologies and related studies should be continuously conducted.

• Journal of Ginseng Research
• /
• v.46 no.1
• /
• pp.62-70
• /
• 2022

Background: Maternal Toxoplasma gondii (T. gondii) infection during pregnancy has been associated with various mental illnesses in the offspring. Ginsenoside Rh2 (GRh2) is a major bioactive compound obtained from ginseng that has an anti-T. gondii effect and attenuates microglial activation through toll-like receptor 4 (TLR4)/nuclear factor-kappa B (NF-κB) signaling pathway. GRh2 also alleviated tumor-associated or lipopolysaccharide-induced depression. However, the effects and potential mechanisms of GRh2 on depression-like behavior in mouse offspring caused by maternal T. gondii infection during pregnancy have not been investigated. Methods: We examined GRh2 effects on the depression-like behavior in mouse offspring, caused by maternal T. gondii infection during pregnancy, by measuring depression-like behaviors and assaying parameters at the neuronal and molecular level. Results: We showed that GRh2 significantly improved behavioral measures: sucrose consumption, forced swim time and tail suspended immobility time of their offspring. These corresponded with increased tissue concentrations of 5-hydroxytryptamine and dopamine, and attenuated indoleamine 2,3-dioxygenase or enhanced tyrosine hydroxylase expression in the prefrontal cortex. GRh2 ameliorated neuronal damage in the prefrontal cortex. Molecular docking results revealed that GRh2 binds strongly to both TLR4 and high mobility group box 1 (HMGB1). Conclusion: This study demonstrated that GRh2 ameliorated the depression-like behavior in mouse offspring of maternal T. gondii infection during pregnancy by attenuating the excessive activation of microglia and neuroinflammation through the HMGB1/TLR4/NF-κB signaling pathway. It suggests that GRh2 could be considered a potential therapy in preventing and treating psychiatric disorders in the offspring mice of mothers with prenatal exposure to T. gondii infection.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.53-58
• /
• 2022

Here, the surface characteristics of the dielectric were controlled by introducing the self-assembled monolayers (SAMs) as the intermediate layers on the surface of the AlOx dielectric, and the electrical performances of the organic charge modulated transistor (OCMFET) were significantly improved. The organic intermediate layer was applied to control the surface energy of the AlOx gate dielectric acting as a capacitor plate between the control gate (CG) and the floating gate (FG). By applying the intermediate layers on the gate dielectric surface, and the field-effect mobility (μ_OCMFET) of the OCMFET devices could be efficiently controlled. We used the four kinds of SAM materials, octadecylphosphonic acid (ODPA), butylphosphonic acid (BPA), (3-bromopropyl)phosphonic acid (BPPA), and (3-aminopropyl)phosphonic acid (APPA), and each μ_OCMFET was measured at 0.73, 0.41, 0.34, and 0.15 cm2V-1s-1, respectively. The results could be suggested that the characteristics of each organic SAM intermediate layer, such as the length of the alkyl chain and the type of functionalized end-group, can control the electrical performances of OCMFET devices and be supported to find the optimized fabrication conditions, as an efficient sensing platform device.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.105-111
• /
• 2009

The study aims to propose the intelligent clustering technique that calculates the distance by improving the problems of multi-hop clustering technique for inter-vehicular secure communications. After calculating the distance between vehicles with no connection for rapid transit and clustering it, the connection between nodes is created through a set distance vale. Header is selected by the distance value between nodes that become the identical members, and the information within a group is transmitted to the member nodes. After selecting the header, when the header is separated due to its mobility, the urgent situation may occur. At this time, the information transfer is prepared to select the new cluster header and transmit it through using the intelligent cluster provided from node by the execution of programs included in packet. The study proposes the cluster technique of the intelligent distance estimation for the mobile Ad-hoc network that calculates the cluster with the Store-Compute-Forward method that adds computing ability to the existing Store-and-Forward routing scheme. The cluster technique of intelligent distance estimation for the mobile Ad-hoc network suggested in the study is the active and intelligent multi-hop cluster routing protocol to make secure communications.