• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1175-1179
• /
• 2009

본 논문은 대전입자형 디스플레이의 입자층과 상판과 하판의 전극간격(cell gap)으로 전압특성을 분석하여 에이징 전압 인가 전, 후의 응답속도를 측정하였다. 입자층이 증가할수록 비례하여 문턱/구동/항복 전압이 증가하였고 응답속도는 켈러입자와 검정입자의 q/m값의 차이로 문턱/항복 전압보다 구동전압에서의 응답속도가 빠른 것을 확인하였다. 응답속도는 레이저와 포토다이오드를 이용하여 광학특성으로 측정하였고 입자의 뭉침현상은 aging공정으로 최소화 하였다. 아직까지 대전입자형 디스플레이의 응답속도와 문턱/구동/항복 전압 및 입자주입층, cell gap, aging공정에 관하여 보고된 바 없으며 이에 상관관계를 평가하고 영향을 분석하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.123-126
• /
• 2002

Samples of Nb/Al-Al$O_{x}$/Nb tunnel junction with the size of 50$\mu$m $\times$ 50$\mu$m were fabricated by employing self-aligning and reactive ion etching technique. In the samples with high-quality, $V_{m}$ value (the product of the critical current and subgap resistance measured at 2 mV) was 34 mV at the critical current density $J_{c}$ = 500 A/$cm^{2}$ and $V_{g}$ value (the gap voltage) was 2.8 mV. In the higher $J_{c}$, voltage fluctuation in the current rising at the gap voltage was observed. The $V_{m}$ and $J_{c}$ value were 8 mV and 900 A/$cm^{2}$, respectively.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.261-267
• /
• 2008

One of the most important issues in fence-type PDP is low luminance and luminous efficiency. To improve luminance and luminous efficiency, new sustain electrode structure which contains long discharge gap is necessary. However, it causes rise of firing voltage. In this paper, a new fence electrode structure is proposed in order to solve these problems. To drop the firing voltage, tow hump shaped electrodes is added on the main discharge electrode, and distance between two humps is controlled. The experimental results show that the test panel with the narrow horizontal gap(40um) between two humps shows low firing voltage by 17V compared with 80um gap in spit of similar luminance and luminous efficiency.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.359-364
• /
• 2000

This paper is introducing a newly developed spark-gap switch with dual trigger system, into which the current from the voltage source is injected along with the test sequence during the synthetic testing of high voltage circuit-breaker. The currently-used spark gap switch is narrow in operating range due to the use of the method of triggering energy being injected by single way. As a result, the frequent happening of misoperation has greatly reduced the test quality and test efficiency and has required the cost of maintenance excessively. In this study, accordingly, in order to basically remove these problems, another triggering system is installed to the opposite direction on the existing triggering system; attaching the same time and the same rising time of pulse wave as on the existing system, so that at a comparatively trigger gap distance from the main electrode(the gap can be operated at 60% of self-break voltage, while at 80% in the current system), the main electrode has been enabled to be closed by the development of spark gap switch with dual trigger system.

• 조명전기설비학회논문지
• /
• 제27권4호
• /
• pp.73-80
• /
• 2013

Breakdown characteristics of air in the vertical arrangement of line conductor and plane electrode in case of combustion flame on the plane electrode are examined by the application of AC. and DC voltages to the gap. In order to investigate the effect of paraffin flame on the breakdown characteristics of air, flashover voltages are measured according to the variation of the gap length and the horizontal distance between the flame and the line conductor. As the result of the experiment, flashover voltages are substantially lowered down to 29.8% in case of the AC voltage, and 16.1% in case of the negative DC voltage, when in the presence of the flame. from 100% when in the absence of flame. Flashover voltages of air in the range of smaller than 3㎝ at the horizontal distance are increased in the proportion of the gap length and the horizontal distance in case of both AC and negative DC voltages. But before the flashover occurs, the flame is extinguished by such corona wind that is produced from the line conductor when the gap length and the horizontal distance reach to a certain degree. The effect of relative air density and the phenomenon of thermal ionization are analysed as the reduction factors of flashover voltages, due to high temperature of the flame.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1786-1788
• /
• 1999

In this paper, we studied Surface Discharge Type Flat Fluorescent Lamp with High Luminance for LCD Backlighting, Liquid Crystal display(LCDs) demand the use of fluorescent lamp as the backlighting source. This lamp is Surface Discharge Type structure with a pair of Sodalime glass, insulator layer, phosphor layer, and Xe gas gap. In spite of its simple structure, the lamp has uniform and stable discharge over entire volume. Till now, we measured the current-voltage(V-I), Firing Voltage, Sustain Voltage for 0.5mm, 1mm electrode gap. In experiment result, long gap cell structure cause high firing voltage. The rising in firing voltage in long gap structure could not be explained by paschen's law because of non-uniform electric field.

• 한국정보통신학회논문지
• /
• 제6권7호
• /
• pp.1079-1083
• /
• 2002

반도체 소자의 정전기 내성을 알아보기 위해 필요한 HBM ESD 테스터를 작자하였다 .HBM ESD 테스트는 MMIC의 정전기 내성을 측정하는 데 가장 많이 사용하는 방식이다. 고전압의 ESD 신호론 얻기 위하여 DC-DC converter의 일종인 flyback 방식온 도입하였다. Flyback 방식으로 제자된 HBM ESD 테스터는 고전압 부분과 저전압 부분을 서로 격리시킬 수 있는 장점이 있다 스위치로 사용된 relay의 air gap을 이용하여 정전기의 rise time이 국제 규격에 맡도록 설계하였다. 결과적으로, flyback 방식과 relay의 air gap을 이용하여 기생 성분이 최소화된 ESD 테스터를 제작하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.469-472
• /
• 2002

반도체 소자의 정전기 내성을 알아보기 위해 필요한 HBM ESD 테스터를 제작하였다. HBM ESD 테스트는 MMIC의 정전기 내성을 측정하는데 가장 많이 사용하는 방식이다. 고전압의 ESD 신호를 얻기 위하여 DC-DC converter의 일종인 flyback 방식을 도입하였다. Flyback 방식으로 제작된 HBM ESD 테스터는 고전압 부분과 저전압 부분을 서로 격리시킬 수 있는 장점이 있다. 스위치로 사용된 relay의 air gap을 이용하여 정전기의 rise time이 국제 규격에 맞도록 설계하였다. 결과적으로, flyback 방식과 relay의 air gap을 이용하여 기생 성분이 최소화된 ESD 테스터를 제작하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.605-608
• /
• 2001

With the intention of investigating the breakdown properties of oil-immersed transformer oils in temperature range of 20∼100[$^{\circ}C$], we are made researches AC breakdown in the gap of 500∼2,500[$\mu\textrm{m}$]. The classification for the physical properties of oil for oil-immersed transformer by FTH and $^1$H-NMR experiments was confirmed to type of mineral oils. As the dependance of breakdown properties due to electrode gap length variation, breakdown voltage was found increasing according to the increase of gap, while dielectric strength was decreasing. As a result the characteristics for AC breakdown, It goes to prove that the breakdown voltage was increased to 90[$^{\circ}C$] but decreased over 90[$^{\circ}C$] in the temperature range. Also, breakdown voltage was found increasing in the increase of gap and the rising of temperature according to Weibull distribution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.454-456
• /
• 2003

This paper describes a type test results of 154 kV transmission line arrester with external gap. The test was carried on surge arrester unit and line arrester with external gap, respectively. Withstand voltage test demonstrate the voltage withstand capability of the line arrester with external series gap under the dry and wet conditions. In insulation coordination test external series gap shall be discharged every time when lightning impulse voltage with the steepness of more than 1500 $kV/{\mu}s$ are applied under the wet condition.