• ETRI Journal
• /
• 제46권2호
• /
• pp.238-249
• /
• 2024

Equivalent-time sampling can improve measurement or sensing systems because it enables a broader frequency band and higher delay resolution for periodic signals with lower sampling rates than a Nyquist receiver. Meanwhile, a digital down-conversion (DDC) technique can be implemented using a straightforward radio frequency (RF) circuit. It avoids timing skew and in-phase/quadrature gain imbalance instead of requiring a high-speed analog-to-digital converter to sample an intermediate frequency (IF) signal. Therefore, when equivalent-time sampling and DDC techniques are combined, a significant synergy can be achieved. This study provides a parameter design methodology for optimal equivalent-time sampling using DDC.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.281-284
• /
• 2009

In this paper, we propose a method that applies Adaptive Frequency Sampling(AFS) technique to the equivalent circuit model for RF passive components. Thes days wireless communication system is getting smaller and smaller. So EMI/EMC is an issue in RF. We can solve PI(Power Integrity)/SI(Signal Integrity) that one of EMI/EMC problem apply IFFT for 3D EM simulation multiple with input signal. That is time comuming task. Therefore equivalent circuit model using RF passive component is important. AFS schemes are implemented to obtain the rational functions. S parameters of the equivalent circuit moldel is compared to those of EM simulation in case of the microstrip line structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.244-249
• /
• 1998

In this paper, the hybrid state space self-tuning control technique Is studied within the framework of fuzzy systems and dual-rate sampling control theory. We show that fuzzy modeling techniques can be used to formulate chaotic dynamical systems. Then, we develop the hybrid state space self-tuning fuzzy control techniques with dual-rate sampling for digital control of chaotic systems. An equivalent fast-rate discrete-time state-space model of the continuous-time system is constructed by using fuzzy inference systems. To obtain the continuous-time optimal state feedback gains, the constructed discrete-time fuzzy system is converted into a continuous-time system. The developed optimal continuous-time control law is then convened into an equivalent slow-rate digital control law using the proposed digital redesign method. The proposed technique enables us to systematically and effective]y carry out framework for modeling and control of chaotic systems. The proposed method has been successfully applied for controlling the chaotic trajectories of Chua's circuit.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.349-361
• /
• 2013

As a result of the advantages such as high efficiency, continuous current and high stability margin, push-pull converter with continuous current (PPCWCC) is competitive for battery discharge regulator (BDR) which plays an important role in power conditioning unit (PCU). Leakage inductance yields current spike in low-ripple current of PPCWCCs. The operating modes are added due to leakage inductance. Therefore the steady state performance is affected, which is embodied in the spike of low-ripple current. PPCWCCs which are suitable for BDR can be separated into three types by current spike characteristics. Three representative topologies IIs1, IIcb2 and Is3 are analyzed in order to investigate the factors on the magnitude and duration of spike. Equivalent current sampling method (ECSM) which eliminates the sampling time delay and achieves excellent dynamic performance is adopted to prevent the spike disturbance on current sampling. However, ECSM reduces the sampling accuracy and telemetry accuracy due to neglecting the spike. In this paper, ECSM used in PPCWCCs is summarized. The current sampling error is analyzed in quality and quantity, which provides the foundation for offsetting and enhancing the telemetry accuracy. Finally, current sampling error rate of three topologies is compared by experiment results, which verify the theoretical analysis.

• 전자공학회논문지
• /
• 제52권12호
• /
• pp.67-73
• /
• 2015

본 논문에서는 근거리 위치 기반 시스템을 위한 3 - 5 GHz IR-UWB(impulse radio-ultra wide band) RFIC를 제안한다. 수신기의 구조는 에너지 검출 방식으로 설계되었고, 고속 sampling을 하기 위해서 4 bit ADC 와 DLL(delay locked loop) 을 이용하여 equivalent-time sampling 기술을 사용하도록 설계되었다. 송신기는 저전력의 디지털 UWB impulse generator 를 설계하였다. 설계된 IR-UWB RFIC 는 CMOS $0.18{\mu}m$ 공정을 이용하여 제작되었다. 측정된 수신기의 감도는 -85.7 dBm 이며, 송신기와 수신기는 1.8 V 전원 전압에서 각각 32 mA 와 25.5 mA 의 전류를 소모한다.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.680-687
• /
• 2018

시추공 레이다는 지하자원 및 지질탐사 목적으로 사용되는 레이다로서 수 ns의 펄스폭을 갖는 전자파를 송신하고 탐사 대상으로부터 반사되어 입력되는 수십에서 수백MHz의 반사파를 수신하기 위하여 고속 샘플러가 반드시 필요하다. 수십MHz의 샘플링 클럭 주파수로도 수GHz급의 샘플링 성능을 낼 수 있는 ETS(Equivalent-Time Sampling)는 시추공 레이다용 수신기의 샘플러로 사용이 적합하다. ETS 샘플러 설계에 있어 가장 중요한 요소인 샘플링 클럭 지연을 제어하는 방법으로 본 연구에서는 하나의 클럭 소스에 대해 각 $90^{\circ}$씩 위상 차이를 가지는 4개의 클럭을 이용한 방법을 제시하였다. 제안하는 방법은 기존의 지연 발생기를 이용하는 방법보다 설정한 구간 내에서 데이터를 획득하는 시간이 1/23로 단축 가능하다. 구현된 샘플러를 기존 시추공 레이다의 수신기에 적용하면 단축된 샘플링 시간으로 인해 추가로 64회 누적이 가능해져 지하 터널 탐사를 위한 수신신호 품질 개선 효과를 얻을 수 있다. 또한, 목표 샘플링 범위를 만족하기 위해서 여러 개의 샘플링 클럭 지연제어 로직을 사용하는 기존 방식에 비하여 하나의 지연제어 로직을 사용함으로써 그간 반드시 필요하였던 보정 과정의 생략이 가능하다. 그 결과 시스템의 구조를 단순화할 수 있었으며 균일한 샘플러의 구현이 가능하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.506-508
• /
• 1998

In this paper, the optimal digital redesign is studied within the framework of fuzzy systems and dual-rate sampling control theory. An equivalent fast-rate discrete-time state-space model of the continuous-time system is constructed by using fuzzy inference systems. To obtain the optimal feedback gains developed in the continuous-time system, the constructed fuzzy system is converted into a continuous-time system. The developed continuous-time control law is converted into an equivalent slow-rate digital control law using the proposed digital redesign method. The digital redesign technique using a fuzzy model is employed to simulate the inverted pendulum dynamics.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.135-142
• /
• 2002

Input shaping is a method for reducing residual vibration in computer controlled machines. Vibration is eliminated by convolving a sequence of impulses, an input shaper, with a desired system command to produce a shaped input. This paper shows the shape of sensitivity curve of input shaper as impulse interval T and analysis of robustness for input shaper on the z-plane. And a method is presented for designing equivalent input shaper considering sampling time $T_s$. And then we applied equivalent input shaper to crane system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.238-246
• /
• 2011

A 3-5 GHz UWB radar chip in 0.13 ${\mu}m$ CMOS process is presented in this paper. The UWB radar transceiver for surveillance and biometric applications adopts the equivalent time sampling architecture and 4-channel time interleaved samplers to relax the impractical sampling frequency and enhance the overall scanning time. The RF front end (RFFE) includes the wideband LNA and 4-way RF power splitter, and the analog signal processing part consists of the high speed track & hold (T&H) / sample & hold (S&H) and integrator. The interleaved timing clocks are generated using a delay locked loop. The UWB transmitter employs the digitally synthesized topology. The measured NF of RFFE is 9.5 dB in 3-5 GHz. And DLL timing resolution is 50 ps. The measured spectrum of UWB transmitter shows the center frequency within 3-5 GHz satisfying the FCC spectrum mask. The power consumption of receiver and transmitter are 106.5 mW and 57 mW at 1.5 V supply, respectively.

• 통합자연과학논문집
• /
• 제13권4호
• /
• pp.152-157
• /
• 2020

To monitor all elements simultaneously of variance-covariance matrix Σ of several correlated quality characteristics under multivariate normal process Np($\underline{\mu}$, Σ), multivariate exponentially weighted moving average (EWMA) chart and cumulative sum (CUSUM) chart are considered and compared. Numerical performances of the considered variable sampling interval (VSI) charts are evaluated using average run length (ARL), average time to signal (ATS), average number of switches (ANSW) to signal, and the probability of switch Pr(switch) between two sampling interval d1 and d2 where d1 < d2. For small or moderate changes of Σ, the performances of multivariate EWMA chart is approximately equivalent to that of multivariate CUSUM chart.