• 공학교육연구
• /
• 제26권3호
• /
• pp.60-71
• /
• 2023

This study examined the direction that desirable educational direction of science and engineering graduate schools. In order to achieve the purpose, in-depth interviews were conducted with faculty, staffs and students of 'A' science and engineering research-oriented university. As a result of the study, first, independent researchers with international competitiveness, second, intellectuals who fulfill social responsibilities, convergent leaders across various boundaries of knowledge, and fourth, passionate people with a sense of challenge. Conclusions were made on enhancing the competitiveness of higher education and innovating graduate education in South Korea based on research findings.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.22-26
• /
• 2017

The thermal conductivity and the adhesive properties were measured, after synthesis of thermal conductive composite which was obtained as a result of mixing alumina or graphite with acrylic adhesive synthesized by UV polymerization. The adhesive properties of the composite were evaluated measuring the peel strength at 180 degrees, the retention, and the initial tack;the thermal conductivity was estimated using laser flash analysis. As the filler contents increased, a decrease in peel strength and initial tack and an increase in retention and thermal conductivity were observed. When compared to alumina, the adhesion of graphite showed a dramatic decrease, whereas the thermal conductivity was further enhanced. It was found out that the small size of graphite increased the mechanical interlocking between the polymer and the filler, and it was easier for graphite to come into contact with other graphite in the matrix.

• 공학교육연구
• /
• 제15권4호
• /
• pp.31-34
• /
• 2012

This paper deals with the introduction of capstone design projects based on invention education in Department of Electronics and Communication Engineering, Korea Maritime University. This course is referred to as Creative Engineering Design for spring semester of 4th-year undergraduates. The course focuses on creative thinking and cooperative mind to students by learning engineering design skills, realizing their idea through design project and recognizing practicality of their systems. To improve creative thinking of students, intellectual property (IP) education is very helpful. If engineering students take training program in IP, it will be very beneficial for CEOs to manage intellectual capital in many industries and to ensure competition power in their business. This study suggested that students take interest in connecting their ideas with inventions through invention education reinforcing an invention and a patent exercise. It is expected that this study may help to develop new curriculum of capstone design project including IP education in many universities.

• 공학교육연구
• /
• 제23권4호
• /
• pp.28-36
• /
• 2020

Capstone design education is essential in the engineering design process according to the certification standards of ABEEK. Capstone design process should be properly trained in undergraduate courses in order to increase the design ability of systems, components and processes within realistic constraints. In this study, a modified design model as a capstone design education model was proposed to reduce the separation between the design process at industrial sites and the design process at university education. The modified design model based on 6-sigma methodology is composed of 6 design steps such as define, measure, analyse, design, verify, and report. Each step has appropriated design contents and tools, and is configured to generate design results. The proposed design model was directly applied to the capstone design class for automotive engineering in Kunsan National University, and it was confirmed that the proposed DMADVR methodology was a very useful design education model to enhance the design ability, teamwork ability and communication skills required by ABEEK.

• 공학교육연구
• /
• 제21권2호
• /
• pp.7-16
• /
• 2018

The purpose of this study is to develop and implement engineering education program by drawing out the educational needs creative engineering design ability. The importance and current level of creative engineering ability were surveyed and analyzed by using 29 sub - factors of creative engineering design ability presented by Kim Dae young et al(2006). from 234 engineering students in 6 universities. As a result, students recognized that all items of creative engineering design ability were important, and their level was generally recognized. The educational needs for creative ability and creative problem solving ability was high and the educational needs for creative engineering design project was relatively low. Based on these results, it is necessary to develop an educational program to enhance creative engineering design ability by considering learner's perception and professional and industrial recognition.

• 공학교육연구
• /
• 제11권3호
• /
• pp.24-32
• /
• 2008

한국의 공과대학의 교육 목표는 1) 전공교육의 강화, 2) 팀워크능력, 커뮤니케이션 스킬, 비판적 사고력 등을 포함하는 공과대학 소양의 함양 두 가지로 요약될 수 있다. 이 두 가지 교육 목표를 달성하기 위한 시도로 제안된 것이 공학소양교육이다. 현재 공과대학의 교양교육 개선안에는 전공에 구애받지 않는 보편적 교양교육을 강조하고 있는 미국형과 일반 교양교육과 구분되는 공학소양교육의 필요성을 강조하는 한국공학교육인증원형으로 구분된다. 본 연구는 한국공학교육인증원의 공학소양교육과정을 교육과정 개편에 적용한 서울대학교 공과대학의 교양 교육과정 개편 내용과 그 의미를 탐색하였다. 이 논문에 제시된 서울대학교 공과대학 교양교육 개선안은 교양교육의 학점 중 학생들의 자유선택 과목의 비중을 줄이고, 공학소양교육으로 이수하게 하는 방안을 포함하고 있다. 이 방안은 전공에 구애받지 않는 공통적 교양교육의 틀을 지키면서 전공과 단과대학의 특성을 반영하는 전공소양형 교양교육을 강조하는 현실적 방안으로 평가될 수 있다.

• 설비공학논문집
• /
• 제23권11호
• /
• pp.741-746
• /
• 2011

In this study, improvements of university education are suggested so that university graduates can work in plant engineering industry without major retraining which is required in plant engineering companies. Before disposition of manpower to the plant engineering site, new recruits are retrained by the company for about 2~3 years, since university education is not sufficient and appropriate to handle plant engineering tasks. It is urgent to integrate into university education practical plant engineering that can be used effectively after graduation. In case of S2 University located in Seoul, it is enough to supplement interdisciplinary program to plant engineering subjects if proper texts are developed. To replace plant engineering education offered by the company with the university education, following measures should be taken. First, basic plant engineering should be taught for 15 hours. Second, education on design and drawings should be reinforced.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.369-373
• /
• 2009

Recently, the number of applicants for the engineering college is gradually decreased all over the nation. Additionally, the concerns of fall of freshman scholastic ability are raised due to the incomplete high school education. Moreover, the inferior circumstance and supports drive local universities into a corner. Therefore, the local universities endeavor in order to improve the quality of basic engineering education, and study the countermeasure against the crisis. In this paper, we derive several ideas in order to enhance the basic engineering education qualities. And the enhancement plans for the basic engineering education are proposed. Results in this paper will be helpful for engineering college to enhance the basic engineering education as reference materials.

• 공학교육연구
• /
• 제16권6호
• /
• pp.52-57
• /
• 2013

In this paper, the evaluation system in order to achieve the program education objectives of Accreditaion Board for engineering education of Korea, analyze the educational objectives evaluation tool case studies of programs that are run by each university, the program educational objectives to match the actual situation of university I have developed a distinction between questions the evaluation and assessment system. Configuration, execution, measurement, analysis, is a five-step mooring, the evaluation tool, is a graduate research you are currently using the most in Korea, the employer survey, education target assessment model of the program, employment trends of graduates, I decided to graduate focus group interviews. Distinction between questions, the evaluation also developed a questionnaire to derive the important keywords of education for each objectives. Improvement evaluation tool, the evaluation criteria is required, the University is preparing evaluate (NGR) in South Korea engineering education certification next regularly, requires research on semantic analysis of the results of measurement of the educational goals of the program in the future some.

• 공학교육연구
• /
• 제20권6호
• /
• pp.12-21
• /
• 2017

The purpose of this study is to develop an educational program to enhance convergence competence of undergraduate engineering students and analyze its educational effects. Prior to the development of the convergence education program for engineering students, 13 experts in engineering education field surveyed the needs of the convergence education program and 829 students from four engineering colleges in the Seoul metropolitan area, Chungcheong area and Honam area were assessed for the level of convergence competency. The educational program was developed based on the needs analysis and the program consisted of four major themes: convergence lecture, convergence competence, convergence practice, and convergence vision. The validity of the program was confirmed through the two expert validation tests. A total of 40 students participated in the selection of 10 students from each of the four universities. As a result of pre-post comparison of students' convergence competencies, the average of all competencies increased, and it was found that there were statistically significant differences in convergence mindset, differentiation mind, commitment, communication, and social value competence. Implications for the improvement of education programs and convergence education were suggested.