DOI QR코드

DOI QR Code

Study on the Properties of UV Curing Thermal Conductive and Pressure Sensitive Adhesive Using Inorganic Fillers

  • Oh, Ji-Hwan (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) ;
  • Choi, Jin-Yeong (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) ;
  • Kim, Su-Hwan (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) ;
  • Jang, Se-Hoon (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) ;
  • Shin, Yoo-Jin (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) ;
  • Kim, Dae-Hyun (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) ;
  • Yoo, Hwan-Kyu (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education) ;
  • Cho, Ur Ryong (School of Energy, Materials, Chemical Engineering, Korea of Technology and Education, Korea University of Technology and Education)
  • Received : 2017.02.03
  • Accepted : 2017.02.20
  • Published : 2017.03.31

Abstract

The thermal conductivity and the adhesive properties were measured, after synthesis of thermal conductive composite which was obtained as a result of mixing alumina or graphite with acrylic adhesive synthesized by UV polymerization. The adhesive properties of the composite were evaluated measuring the peel strength at 180 degrees, the retention, and the initial tack;the thermal conductivity was estimated using laser flash analysis. As the filler contents increased, a decrease in peel strength and initial tack and an increase in retention and thermal conductivity were observed. When compared to alumina, the adhesion of graphite showed a dramatic decrease, whereas the thermal conductivity was further enhanced. It was found out that the small size of graphite increased the mechanical interlocking between the polymer and the filler, and it was easier for graphite to come into contact with other graphite in the matrix.

Keywords

References

  1. H. B. Yoon, H. G. Kim, and K. E. Min, "Effect of Photoinitiators on Adhesion Properties of 2-EHA/AA PSA", Polymer(Korea), 38, 491 (2014).
  2. J. Kajtna and M. Krajnc, "Solventless UV Crosslinkable Acrylic Pressure Sensitive Adhesives", International Journal of Adhesion and Adhesives, 31, 822 (2011). https://doi.org/10.1016/j.ijadhadh.2011.08.002
  3. M. R. Haddon and T. J. Smith, "The Chemistry and Applications of UV Cured Adhesives", International Journal of Adhesion and Adhesives, 11, 183 (1991). https://doi.org/10.1016/0143-7496(91)90021-9
  4. J. Kajtna, U. Sebenik, and M. Krajnc, "Synthesis and Dynamic Mechanical Analysis of Nanocomposite UV Crosslinkable 100% Solid Acrylic Pressure Sensitive Adhesives", International Journal of Adhesion and Adhesives, 49, 18 (2014). https://doi.org/10.1016/j.ijadhadh.2013.12.010
  5. B. Tang, G. Hu, H. Gao, and L. Hai, "Application of Graphene as Filler to Improve Thermal Transport Property of Epoxy Resin for Thermal Interface Materials", Int. Journal of Heat and Mass Transfer, 85, 420 (2015). https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.141
  6. Y. Fu, Z. He, D. Mo, and S. Lu, "Thermal Conductivity Enhancement with Different Fillers for Epoxy Resin Adhesives", Applied Thermal Engineering, 66, 493 (2014). https://doi.org/10.1016/j.applthermaleng.2014.02.044
  7. S. Akiyama, Y. Kobori, A. Sugisaki, T. Koyama, and I. Akiba, "Phase Behavior and Pressure Sensitive Adhesive Properties in Blends of Poly(styrene-b-isoprene-b-styrene) wite Tackifier Resin", Polymer, 41, 4021 (2000). https://doi.org/10.1016/S0032-3861(99)00585-6
  8. Y. Yamamoto, S. Fujii, K. Shitajima, K. Fujiwara, S. Hikasa, and Y. Nakamura, "Soft Polymer-Silica Nanocomposite Particles as Filler for Pressure-Sensitive Adhesives" Polymer, 70, 77 (2015). https://doi.org/10.1016/j.polymer.2015.06.006
  9. J. K. Kim, J. W. Kim, M. I. Kim, and M. S. Song, "Thermal Conductivity and Adhesion Properties of Thermally Conductive Pressure-Sensitive Adhesives", Macromolecular Research, 14, 517 (2006). https://doi.org/10.1007/BF03218718
  10. H. G. Kim, "Effect of Silica Concentration and Crosslinking Agent on Adhesion Properties and Thermal Stability of UV Cured 2-EHA/AA PSAs", Journal of Adhesion and Interface, 16 (2015).
  11. S. A. Meguid and Y. Sun, "On the Tensile and Shear Strength of Nano-Reinforced Composite Interfaces", Materials and design, 25, 289 (2004). https://doi.org/10.1016/j.matdes.2003.10.018
  12. M. A. Raza, "Comparison of Carbon Nanofiller-Based Polymer Composite Adhesives and Pastes for Thermal Interface Applications", Materials & Design, 85, 67 (2015). https://doi.org/10.1016/j.matdes.2015.07.008