• Journal of the Korean Geotechnical Society
• /
• v.30 no.4
• /
• pp.101-106
• /
• 2014

The penetration testing provides 1 dimensional profiles of properties applicable to limited investigation areas, although N-value has been linked to a wide range of geotechnical design parameters based on empirical correlations. The nondestructive test using elastic waves is able to produce 2 or 3 dimensional property maps by inversion process with high efficiency in time and cost. As both N-value and elastic wave velocities share common dominant factors that include void ratio, degree of saturation, and in-situ effective stress, the correlation between the two properties has been empirically proposed by previous studies to assess engineering properties. This study presents the experimentally measured elastic wave velocities of Jumunjin sands under at-rest lateral displacement condition with varying the initial void ratio and degree of saturation. Results show that the stress condition predominantly influences the wave velocities whereas void ratio and saturation determine the stress-velocity tendency. The correlation among the dominant factors is proposed by multiple regression analysis with the discussion of relative impacts on parameters.

• Health Policy and Management
• /
• v.16 no.4
• /
• pp.24-47
• /
• 2006

Based on the findings of a study focused on medical institutions(Fama & French, 2002), this study determined possible causality between determinants of capital structure and liability level, while estimating targeted debt ratio. Moreover, it also examined hypotheses about the adjustment of targeted debt ratio and the of fundraising patterns, so that it verified the relative priority of trade-off theory and pecking order theory. First, profitability had positive(+) relationships with liability level, while investment opportunities had negative(-) relationships with liability level. This finding supported pecking order theory, and non-liability tax shield effects had negative(-) relationships with liability level as estimated in both trade-off theory and pecking order theory. Next, this study verified trade-off and pecking order theory at once by means of regression analysis about the variation of liability level in associations with disparity from targeted debt ratio and short-term fluctuation of profit and investment. As a result, it was noted that liability level became mean-reversed to targeted liability ratio but slowly, SO it was difficult to assert that such mean reverse may support trade-off theory. However, the finding that most of short-term fluctuations of profit and investment are absorbed into liabilities supported pecking order theory. On the other hand, it was found that the larger scale of medical institutions is more supportive of pecking order theory in the associations between liability level and profitability and the fundraising patterns than trade-off theory.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.129-138
• /
• 2008

In case of judging the stability of dike or dam structures which need hydraulic interception, the first thing to do is to examine whether a piping phenomenon occurred or not. Generally, dike or dam structures are constructed while layer compacting is executed, so permeability is likely to be anisotropic- different from each other in hydraulic conductivity in the horizontal direction [$k_x$] and hydraulic conductivity in the vertical direction[$k_y$]. This study looked into exit hydraulic gradient and Seepage velocity by conducting an Seepage analysis subsequent to various hydraulic conductivity ratios[k-ratio = ky / kx] and examined the influence on piping by comparing & examining critical Seepage Velocity based on critical hydraulic gradient in theoretical equation and critical Seepage Velocity in empirical equation. As the research result, it was found that hydraulic conductivity ratio operates as a very important factor in case the stability against piping occurrence is considered with the concept of critical hydraulic gradient, but relatively the hydraulic conductivity ratio is very low in its importance in relation to the concept of critical Seepage Velocity.

• Analyses & Alternatives
• /
• v.6 no.1
• /
• pp.7-33
• /
• 2022

This study analyzes the difference in the awareness of Korean Unification among age groups based on survey data. It is verified by statistical model analyses that the ratio of agreement for Korean Unification increases with the age growth, but after the highest peak at the age group of 44 ~ 53 years, the ratio of agreement gradually decreases. The statistical model shows that the age group of 44 ~ 53 years old has 2.5 times higher odds of agreement than the age group of 24 ~ 33 years old and the odds of female to male is 0.56. Meanwhile, the ratio of increase in the agreement, aligned with the increasing age groups, shows 4.3 times higher for males than females. The difference in the ratio of agreement in the overall age groups is estimated to be contributed the most by the significant difference in the ratio of agreement for Korean Unification between the young male generation (in their 20s and 30s) and the middle-aged male generation (in their 40s and 50s).

• Journal of the Korean institute of surface engineering
• /
• v.57 no.3
• /
• pp.165-178
• /
• 2024

In semiconductor memory device manufacturing, the capability for high aspect ratio contact (HARC) etching determines the density of memory device. Given that there is no standardized definition of "high" in high aspect ratio, it is crucial to continuously monitor recent technology trends to address technological gaps. Not only semiconductor memory manufacturing companies such as Samsung Electronics, SK Hynix, and Micron but also semiconductor manufacturing equipment companies such as Lam Research, Applied Materials, Tokyo Electron, and SEMES release annual reports on HARC etching technology. Although there is a gap in technological focus between semiconductor mass production environments and various research institutes, the results from these institutes significantly contribute by demonstrating fundamental mechanisms with empirical evidence, often in collaboration with industry researchers. This paper reviews recent studies on HARC etching and the study of dielectric etching in various technologies.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.15-24
• /
• 2001

In order to evaluate undrained shear strength of clayey soils using Piezocone Penetration Test (CPTu), piezoncone factor is utilized. Commonly, piezoncone factors determined by empirical basis were preferred, which were established by correlation between measurements of piezocone test and undrained strengths obtained from other shearing tests. However, previous studies on the empirical piezocone factors were site-specific and there have been no systematic investigations on the effect of both engineering characteristics of clayey soils and soil non-homogeneity on the piezocone factor. Accordingly, the direct application of the previous results to Korean clayey soils without verification may be inappropriate. In this study, empirical piezocone factors are evaluated by comparing 46 CPTu results of 10 test sites with undrained shear strength obtained from Field Vane Test (FVT) and laboratory triaxial tests. Their reliabilities are investigated by the comparison with the previous piezocone factors and the deviation of data distribution from the mean values. And the effects of referencing test methods and typical engineering characteristics of clayey soils such as overconsolidation ratio (OCR) and plastic Index (I$_{p}$) are examined. Because piezocone factors obtained for various soil conditions are widely distributed, it is not appropriate to use the mean value as a representative. Instead, it is recommended to apply the piezocone factors with OCR, which is found to be a major factor in deriving piezocone factor. The necessitated piezocone factors are presented.d.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• Asia pacific journal of information systems
• /
• v.19 no.1
• /
• pp.63-82
• /
• 2009

Virtual community is a social aggregation to attain some goals in an IT-supported virtual space (Lee et al., 2002). As lots of virtual communities generate robust and reliable outputs with low control and low incentive, previous researchers was interested in the questions, "why do they participate?" or "how are they controlled?". But. as Katz (1964) said, the most important part of the high-performing organization is the behaviors of members in the organization. Therefore, this research is to examine the relationship between the performance and the behaviors of participants in the virtual community. First, we propose 6 types of behaviors related to high performance in the virtual community: 'Continuous Attendance', 'Complying with the organizational value, policies, and regulations', 'Protection', 'Suggestion for the improving', 'Self-training', and 'Favorable behavior'. The six types of behaviors are extracted from the framework of Katz (1964) and Brief and Motowidlo (1986). The reason why each behavior is positively related with high-performance is that those who continuously attend have more responsibility than temporary participants do; complying with the rules of a virtual community means that they may make more reliable outcome; 'Protection' is one of the prosocial-behaviors and those who protect the community may concern the benefit of the virtual community when they participate: those who suggest some ideas for improvement may contribute to the virtual community; 'Self-training' behavior means that participants really want to have high quality in their contribution: those who have 'Favorable attitude' consider other members in the virtual community when they participate. Then, we perform an empirical analysis with the survey from participants in the Knowledge service of Naver.com, to show those behaviors are associated with the high-performance. To make the measurement for the six behaviors, we use CVR (content validity ratio) method (Lawshe, 1975), interviewing 12 experts. The dependent variable, performance of participation, is measured by 'ratio of selected answer' given by the Naver.com. We use email survey. We sent 1200 emails to randomly selected participants in the knowledge service and received 282 responses. The results of our empirical analysis show that 4('Continuous Attendance', 'Suggestion for the improving', 'Self-training', 'Favorable attitude') are positively related to the performance, but 2('Complying with the organizational value, policies, and regulations' and 'Protection') are not significant. In line with Fitzgerald (2006), we expect that participants in the virtual community may behave similarly to employees in the off-line firms for the high performance. But 2 behaviors have different results. The reason that the 'Complying with the organizational value' behavior is not sufficiently related to performance is that the motivation of participants is more related to intrinsic pleasure or altruism than external reward. Also, the 'Protection' behavior has no significant relationship with performance, which means that the high-performing participants have little concern about the problems in the community.

• Communications of Mathematical Education
• /
• v.26 no.1
• /
• pp.85-108
• /
• 2012

The comprehensive implication in justification activity that includes the proof in the elementary school level where the logical and formative verification is hard to come has to be instructed. Therefore, this study has set the following issues. First, what is the mathematical justification type shown in the Number and Operations, and Geometry? Second, what are the errors shown by students in the justification process? In order to solve these research issues, the test was implemented on 62 third grade elementary school students in D City and analyzed the mathematical justification type. The research result could be summarized as follows. First, in solving the justification type test for the number and operations, students evenly used the empirical justification type and the analytical justification type. Second, in the geometry, the ratio of the empirical justification was shown to be higher than the analytical justification, and it had a difference from the number and operations that evenly disclosed the ratio of the empirical justification and the analytical justification. And third, as a result of analyzing the errors of students occurring during the justification process, it was shown to show in the order of the error of omitting the problem solving process, error of concept and principle, error in understanding the questions, and technical error. Therefore, it is prudent to provide substantial justification experiences to students. And, since it is difficult to correct the erroneous concept and mistaken principle once it is accepted as familiar content that it is required to find out the principle accepted in error or mistake and re-instruct to correct it.

• Economic and Environmental Geology
• /
• v.38 no.1
• /
• pp.45-55
• /
• 2005

Traditional GIS-based probabilistic spatial data integration models for landslide susceptibility analysis have failed to provide the theoretical backgrounds and effective methods for integration of different types of spatial data such as categorical and continuous data. This paper applies two spatial data integration models including non-parametric empirical estimation and parametric predictive discriminant analysis models that can directly use the original continuous data within a likelihood ratio framework. Similarity rates and a prediction rate curve are computed to quantitatively compare those two models. To illustrate the proposed models, two case studies from the Jangheung and Boeun areas were carried out and analyzed. As a result of the Jangheung case study, two models showed similar prediction capabilities. On the other hand, in the Boeun area, the parametric predictive discriminant analysis model showed the better prediction capability than that from the non-parametric empirical estimation model. In conclusion, the proposed models could effectively integrate the continuous data for landslide susceptibility analysis and more case studies should be carried out to support the results from the case studies, since each model has a distinctive feature in continuous data representation.