• 제목/요약/키워드: emission factor method

검색결과 258건 처리시간 0.022초

CBD 공법을 이용하여 Cd2+ 원소 Alloying 시간을 조절한 Cu2Zn1-xCdxSn(SxSe1-x)4 박막 태양전지의 광전지 성능 향상 분석 (Analysis of Photovoltaic Performance Improvement of Cu2Zn1-xCdxSn(SxSe1-x)4 Thin Film Solar Cells by Controlling Cd2+ Element Alloying Time Using CBD Method)

  • 박상우;장수영;장준성;김진혁
    • 한국재료학회지
    • /
    • 제32권11호
    • /
    • pp.481-488
    • /
    • 2022
  • The Cu2ZnSn(SxSe1-x)4 (CZTSSe) absorbers are promising thin film solar cells (TFSCs) materials, to replace existing Cu(In,Ga)Se2 (CIGS) and CdTe photovoltaic technology. However, the best reported efficiency for a CZTSSe device, of 13.6 %, is still too low for commercial use. Recently, partially replacing the Zn2+ element with a Cd2+element has attracting attention as one of the promising strategies for improving the photovoltaic characteristics of the CZTSSe TFSCs. Cd2+ elements are known to improve the grain size of the CZTSSe absorber thin films and improve optoelectronic properties by suppressing potential defects, causing short-circuit current (Jsc) loss. In this study, the structural, compositional, and morphological characteristics of CZTSSe and CZCTSSe thin films were investigated using X-ray diffraction (XRD), X-ray fluorescence spectrometer (XRF), and Field-emission scanning electron microscopy (FE-SEM), respectively. The FE-SEM images revealed that the grain size improved with increasing Cd2+ alloying in the CZTSSe thin films. Moreover, there was a slight decrease in small grain distribution as well as voids near the CZTSSe/Mo interface after Cd2+ alloying. The solar cells prepared using the most promising CZTSSe absorber thin films with Cd2+ alloying (8 min. 30 sec.) exhibited a power conversion efficiency (PCE) of 9.33 %, Jsc of 34.0 mA/cm2, and fill factor (FF) of 62.7 %, respectively.

환경 인쇄 기술의 발전과 인쇄물의 $CO_2$ 발생량에 관한 연구 (A Study about Development of Environment Printing Technology and $CO_2$)

  • 이문학
    • 한국인쇄학회지
    • /
    • 제30권3호
    • /
    • pp.89-114
    • /
    • 2012
  • For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

기후변화가 경안천 유역의 수문요소에 미치는 영향 평가 (Assessing Future Climate Change Impact on Hydrologic Components of Gyeongancheon Watershed)

  • 안소라;박민지;박근애;김성준
    • 한국수자원학회논문집
    • /
    • 제42권1호
    • /
    • pp.33-50
    • /
    • 2009
  • 본 연구에서는 SLURP 장기 수문모형을 이용하여 미래기후와 예측된 토지이용자료 및 식생의 활력도를 고려한 상태에서 하천유역의 수문요소에 미치는 영향을 분석하였다. 경안천 상류유역($260.4\;km^2$)을 대상유역으로 선정하여 4개년(1999-2002) 동안의 일별 유출량 자료를 바탕으로 모형의 보정(1999-2000)과 검증(2001-2002)을 실시하였다. 모형의 보정 및 검정 결과 Nash-Sutcliffe 모형효율은 0.79에서 0.60의 범위로 $R^2$는 0.77에서 0.60의 범위로 나타났다. 미래 기후자료는 IPCC(Intergovernmental Panel on Climate Change)에서 제공하는 A2, A1B, B1 기후변화시나리오 의 MIROC3.2 hires, ECHAM5-OM 모델의 결과 값을 이용하였다. 먼저 과거 30년 기후자료(1977-2006, baseline)를 바탕으로 각 모델별 20C3M(20th Century Climate Coupled Model)의 모의 결과 값을 이용하여 강수와 온도를 보정 한 뒤 Change Factor Method로 downscaling 하였다. 미래 기후자료는 2020s(2010-2039), 2050s(2040-2069), 2080s(2070-2099)의 세 기간으로 나누어 분석하였다. 불확실성을 줄이고자 개선된 CA-Markov기법으로 미래 토지이용을 예측하였으며, 월별 NDVI와 월평균기온간의 선형 회귀식을 도출하여 미래의 식생지수 정보를 추정하였다. 모형의 적용결과, 미래 유출량은 MIROC3.2 hires는 A1B(2080s) 시나리오에서 연 유출량이 21.4% 증가, ECHAM5-OM은 A1B(2050s) 시나리오에서 8.9% 증가하였다. 증발산량은 MIROC3.2 hires가 3%, ECHAM5-OM은 16% 증가하였다. 미래 토양수분량은 현재에 비해 약 1% 정도 증가하였다.

폐기물처리시설의 세부검사방법 마련연구(I): 공정별 주요인자 도출 및 물질·에너지수지 산정 (A study on inspection methods for waste treatment facilities(I): Derivation of impact factor and mass·energy balance in waste treatment facilities)

  • 이풀잎;권은혜;손준익;강준구;전태완;이동진
    • 유기물자원화
    • /
    • 제31권1호
    • /
    • pp.69-84
    • /
    • 2023
  • 폐기물처리시설의 지속적인 설치·정기검사에도 불구하고 현장 처리시설에서는 과다소각, 불법투기 악취 등에 대한 민원이 지속적으로 발생하는 것으로 보아 현재의 폐기물처리시설 설치정기 검사방법의 개선이 필요하다고 판단되었다 이에 현재 운영중인 폐기물처리시설(6개분야)을 대상으로 현장조사를 실시하여 각 분야별 폐기물처리공정을 파악하고 검사에 적용된 주요한 운영인자를 파악하고, 주요공정별 물질·에너지수지를 산정하여 폐기물처리시설의 적정 운영 여부를 확인하였다. 주요 운영인자 조사 결과 소각 및 시멘트 소성로, 소각열회수시설 등의 경우 소각에 필요한 소각로의 온도 유지 및 발생되는 대기오염물질의 처리가 가장 주요한 인자였으며, 매립시설의 경우 옹벽의 안정성, 매립 후 발생되는 침출수 및 배출가스 관리가 주요한 인자로 나타났다. 멸균·분쇄시설의 경우 멸균여부(아포균검사)가 가장 중요한 주요인자 이었으며, 음식물류폐기물처리시설의 경우 발효(소화, 부숙) 시 체류시간 및 악취관리가 주요한 인자로 나타났다. 또한 물질에너지수지 산정 결과 소각시설의 경우 폐기물 투입량 대비 바닥재 발생량은 약 14%, 비산재 발생량은 약 3%로 적정 운영되고 있을을 확인하였다. 또한 음식물류폐기물시설 중 혐기성분해시설의 경우 유입량 대비 바이오가스 발생량은 약 17%, 바이오가스 전환효율은 약 81%로 나타났고, 퇴비화시설의 경우 유입폐기물 대비 약 11%의 퇴비가 생산되어 모두 적정운영 되고있음을 확인하였다. 이에 따라 폐기물처리시설 검사방법의 고도화를 이루기 위해 세부검사방법의 정량적 기준 적립 뿐만 아니라 각 시설의 정기검사 시 1년간의 운영자료 등을 수집하여 폐기물의 흐름을 파악하고 처리시설의 적정운영 여부를 판단한다면, 처리시설의 운영 및 관리효율이 상승할 것으로 판단된다.

SWAT 모형을 이용한 소양강댐 유역의 미래 수자원 영향 평가 (Assessment of future hydrological behavior of Soyanggang Dam watershed using SWAT)

  • 박민지;신형진;박근애;김성준
    • 대한토목학회논문집
    • /
    • 제30권4B호
    • /
    • pp.337-346
    • /
    • 2010
  • 기후변화는 전 세계적으로 다양한 영향을 끼치고 있다. 본 연구에서는 준분포형 연속 모형인 SWAT을 이용하여 소양강 유역(2,694.4 $km^2$)의 기후, 식생활력도, 토지이용 변화에 따른 수문요소 변화 값을 정량화하여 기후변화에 따른 수문요소의 영향을 분석하였다. 1997-2006년의 일 댐유입량을 이용하여 모형을 보정한 결과 Nash-Sutcliffe 모형 효율이 0.45-0.91로 나타났다. 기후변화 자료는 IPCC(Intergovernmental Panel on Climate Change)의 GCM 모형 중 MIROC3.2 hires, ECHAM5-OM, HadCM3의 결과 값을 입력하였으며, 이때 배출 시나리오는 A2, A1B와 B1을 사용하였다. 각 모형에 20C3M(20th Century Climate Coupled Model) 값과 과거 30년(1977-2006)의 값을 비교하여 오차 수정을 한 후 2000년(base line)을 기준으로 각 기간별 Change Factor Method로 다운스케일링을 실시하였다. 미래 기후자료는 2020s(2010-2039), 2050s(2040-2069), 2080s(2070-2099)의 기간으로 나누어 분석하였다. 미래 온도의 경우 연도별로는 $2.0{\sim}6.3^{\circ}C$ 증가하였으며, 계절적으로도 HadCM3를 제외한 전 기간에 증가하였다. 연강수량은 $-20.4{\sim}32.3%$ 변화하였으며, 가을의 강수량 감소와 겨울과 봄 강수량 증가가 모든 모형에서 나타났다. 미래 토지이용과 식생 활력도 예측에는 CA-Markov 방법과 MODIS LAI와 온도와의 회귀식을 사용하였다. 이에 따른 연중 수문요소 예측 결과, 증발산량은 최대 30.1% 증가하였으며, 토양수분과 지하수 함양량은 최대 32.4%, 55.4% 감소하는 것으로 예측되었다. 댐 유입량의 경우는 모형별 차이가 크며, $-38.6{\sim}29.5%$의 변화 범위를 보였다. 계절적으로는 모든 시나리오에서 가을의 댐 유입량, 토양수분, 지하수 함양량 감소를 보였으며, 온도와 강수량이 감소하는 일부기간을 제외하고는 증발산량은 모두 증가하였다.

동적 $H_2^{15}O$ PET에서 앙상블 독립성분분석법을 이용한 심근 혈류 정량화 방법 개발 (Development of Quantification Methods for the Myocardial Blood Flow Using Ensemble Independent Component Analysis for Dynamic $H_2^{15}O$ PET)

  • 이병일;이재성;이동수;강원준;이종진;김수진;최승진;정준기;이명철
    • 대한핵의학회지
    • /
    • 제38권6호
    • /
    • pp.486-491
    • /
    • 2004
  • 목적: 요소분석법. 독립성분분석법 등이 PET을 이용하여 심근혈류를 비침습적으로 측정하기 위하여 사용되어 왔다. 이론적으로 뛰어나고 새로운 방법인 앙상블 독려성분분석법을 이용하여 $H_2^{15}O$ 동적 심근 PET데이터의 정량분석방법을 개발하였다. 이 연구에서 사용한 앙상블 독려성분분석법을 이용하여 환자의 혈류를 정량화 하였다. 대상 및 방법: 관동맥질환이 의심되어 관류 SPECT를 시행한 환자 20명을 대상으로 $H_2^{15}O$ 동적 심근 PET을 시행한 후 앙상블 독립성분분석법을 이용하여 심근 독립성분영상을 추출하였으며, 좌심실영역과 심근영역에 대한 영상대조도를 조사하였다. 앙상블 학습은 독립성분과 가중치 행렬에 대한 확률분포를 가정하고 베이지안 이론에 의해서 혼합자료에 대한 확률분포를 추정한다. 이렇게 추정한 혼합자료의 확률분포와 실제 분포간의 차이인 Kullback-Leibler 발산치가 최소가 되도록 독립성분과 가중치 행렬을 순차적으로 변화시켜가며 최종 해를 찾는 방식이다. 이 연구에서 사후확률분포는 동적 핵의학 영상에 적합한 비음성제약조건과 함께 수정된 가우시안 분포를 이용하여 최적화 하였다. 혈류량은 심첨부, 중벽 네 부분, 하벽 네 부분의 9개 영역으로 나누어 측정하였으며, 측정결과에 대해 관류 SPECT 소견과 관동맥조영술의 소견과 비교하였다. 결과: 전체 20명의 휴식기 및 부하기 영상에서 5명을 제외한 15명의 데이터에 대해 심근혈류를 측정할 수 있었다. $H_2^{15}O$ 동적 심근 PET에서 앙상블 독립성분분석법을 이용하여 정량화한 휴식기 혈류량은 $1.2{\pm}0.40$ ml/min/g, 부하기 혈류량은 $1.85{\pm}1.12$ml/min/g이었다. 같은 영역에 대해 두 번 측정했을 때 측정된 심근혈류값의 상관계수는 0.99로 재현성이 높았다. 분리된 독립성분영상에서 영상대조도는 좌심실에 대한 심근영역의 비는 평균 1:2.7이었다. 관동맥 조영술을 시행한 9명에서 협착이 없는 분절과 협착이 있는 분절의 혈류예비능에 유의한 차이가 있었다(P<0.01). 또한, 관동맥조영술에서 협착이 확인된 66분절의 심근관류 SPECT 소견에서 가역적 혈류감소를 보인 분절의 혈류예비능이 더 많이 감소되는 경향을 보였으나 통계적 유의성을 보이지는 않았다. 결론: 앙상블 학습을 이용한 독립성분분석방법을 이용하여 심근혈류가 측정이 되었다. 앙상블 독립성분분석법을 이용한 $H_2^{15}O$ 동적 심근 PET 분석방법이 관상동맥 질환의 분석 및 동적 핵의학 영상 데이터의 연구에 도움이 될 것으로 기대된다.

라만증폭기의 효율적인 성능분석을 위한 라만방정식의 적분형 전개와 수치해석 알고리즘 (Closed Integral Form Expansion for the Highly Efficient Analysis of Fiber Raman Amplifier)

  • 최락권;박재형;김필한;박종한;박남규
    • 한국광학회지
    • /
    • 제16권3호
    • /
    • pp.182-190
    • /
    • 2005
  • 본 논문은 효율적으로 라만 증폭기의 이득을 예측하고 잡음 특성을 분석하기 위해서 라만 증폭기 상관된 상미분방정식 (Ordinary Differential Equation: ODE)을 유효거리(Effective Length) 기반의 상관된 적분형(closed integral form)방정식 및 매트릭스로 전개하고 이 전개를 활용한 라만 증폭기 모델링 및 수치해석 알고리즘을 기술한다. 광섬유 라만 증폭기는 유연하고 넓은 이득 대역폭 및 낮은 잡음 등의 장점 때문에 최근 광통신 시스템에서 핵심기술로 각광받고 있으며, 특히 멀티채널 펌핑구조에서 성능예측을 위해 많은 라만 증폭기 모델링 방법들이 연구되어 왔다. 그러나 기존의 많은 연구들은 라만 증폭기 상관된 상미분방정식의 해를 "fiber propagation axis"를 기반으로 구해왔기 때문에 광섬유 길이에 의존적이고 복잡한 계산으로 상당히 많은 시간이 필요했으며, 실제 전송 시스템에서의 활용이 어려웠다. 이러한 문제점을 해결하기 위해서 본 논문에서는 기존의 상관된 상미분방정식을 접근이 용이한 "유효거리" 기반의 적분형 방정식으로 전개하고 매트릭스 및 벡터 형태로 알고리즘을 공식화하여 빠른 라만 이득 계산과 "iteration axis"를 이용한 해의 도출을 통해 새로운 라만 증폭기 모델링 방법과 수치해석 알고리즘을 제시하였다. 제안한 수치해석 알고리즘을 전방, 후방 및 양방향 펌핑구조의 라만 증폭기가 도입된 시스템에 적용하는 컴퓨터 모의실험을 수행한 결과 기존의 "Average power method와 비교하여 라만 이득과 광선로 내의 펌프 및 신호 광의 진행정도를 18배 이상의 정밀도에서 0.03 dB 이내의 매우 작은 오차범위 및 100배 이상 단축된 짧은 시간으로 정확히 예측하였다. 또한, 수치해석 알고리즘을 통해서 얻은 신호 광 파워의 분포를 바탕으로 Amplified Spontaneous Emission(ASE), 후방 ASE의 레일레이 산란 및 신호의 이중 레일레이 산란과 같은 라만 증폭기 잡음 요소들을 분석하였다. 새롭게 제안한 수치해석 알고리즘은 실제 광통신 시스템에 적용되어 신속하고 효율적으로 라만 증폭기 성능을 예측하고 분석할 수 있을 것으로 기대된다.

돼지에서 pCK-VEGF165의 심근내 주입에 의한 치료적 혈관조성 (Therapeutic Angiogenesis by Intramyocardial Injection of pCK-VEGF165 in Pigs)

  • 최재성;한웅;김동식;박진식;이종진;이동수;김기봉
    • Journal of Chest Surgery
    • /
    • 제38권5호
    • /
    • pp.323-334
    • /
    • 2005
  • 배경: 유전자 치료에 의한 치료적 혈관조성은 허혈성 심질환의 새로운 치료전략의 하나로 최근 많은 연구가 진행되고 있다. 본 연구의 목적은 대동물에서 pCK 플라스미드 벡터에 혈관내피성장인자(vascular endothelial growth factor isoform 165: VEGF165) 유전자를 삽입한 pCK-VEGF를 이용한 치료적 혈관조성의 효용성을 증명하는 것이다. 대상 및 방법: 총 21 마리의 돼지를 이용하여 좌전하행지동맥의 원위부를 결찰하여 심근경색 모델을 만든 후, 4주 후에 VEGF 유전자를 삽입한 플라스미드를 심근내에 주입하거나(VEGF군), 유전자 없이 플라스미드 만을 주입하였다(대조군). 실험 대상 동물군을 맹검하에 무작위로 VEGF군 및 대조군으로 나누어 실험을 진행하였는데, 7마리는 실험 도중 사망하였으며 결과적으로 VEGF군은 8마리, 대조군은 6마리가 최종분석에 이용되었다. 좌전하행지동맥 결찰 후 30일째에 심근 SPECT와 심장초음파검사를 시행하고 심근내에 플라스미드를 주입하였으며, 이로부터 30일째에 심근 SPECT와 심장초음파검사를 다시 시행하였다. 허혈부위의 심근관류의 변화는 심근 SPECT상의 $^{99m}Tc-MIBI$의 섭취 정도로 비교하였으며, 국소 및 전체 심근기능 및 심실리모델링 등은 심장초음파 또는 게이트SPECT 검사상의 수축시 심실벽비후화, 좌심실구출률(EF), 수축기말용적(ESV), 이완기말용적(EDV) 등으로 비교하였다. 혈관조성의 정도는 조직검사상의 미세혈관의 밀도를 측정하여 비교하였다. 결과: 미세혈관의 밀도는 VEGF군에서 유의하게 더 높았으며($386\pm110/mm^{2}\;vs.\;291\pm127/mm^{2},\;p<0.001$), 분절의 관류 정도도 VEGF군에서는 관상동맥 결찰 60일째가 30일째에 비해 더 증가한 반면(플라스미드 주입 전, 후, $48.4\pm15.2\%\;vs.\;53.8\pm19.6\%,\;p<0.001$) 대조군에서는 유의한 변화가 없었고(플라스미드 주입 전, 후, $45.1\pm17.0\%\;vs.\;43.4\pm17.7\%,\;p=0.186$), 그 변화량도 두 군간에 유의한 차이를 보였다($11.4\pm27.0\%$ 증가 vs $2.7\pm19.0\%$ 감소, p=0.003). 수축시의 심실벽비후화는 양 군 모두에서 플라스미드 주입 후 유의하게 증가하였으나 증가한 정도는 두 군간에 차이가 없었다. 심장초음파검사상 ESV은 양 군 모두에서 수술 전에 비해 관상동맥 결찰 후 유의하게 증가하였고 (VEGF군, $22.9\pm9.9\;mL\;vs.\;32.3\pm9.1\;mL,\;p=0.006;$ 대조군, $26.3\pm12.0\;mL\;vs.\;36.8\pm9.7\;mL,\;p=0.046$), EF은 유의하게 감소하였으며(VEGF군, $52.0\pm7.9\%\;vs\;46.5\pm7.4\%$, p=0.004; 대조군, $48.2\pm9.2\%\;vs\;41.6\pm10.0\%$, p=0.028), EDV은 양 군 모두에서 유의한 변화가 없었다. 플라스미드 주입 전과 후의 비교에서는 양 군 모두에서 심장초음파 및 게이트 SPECT검사상의 EF, ESV, EDV 값의 유의한 차이가 없었다. 결론: VEGF165 유전자를 삽입한 플라스미드의 심근내 주입 후 허혈성 생존 심근 부위에 혈관조성이 일어나고 심근관류가 유의하게 증가하였다. 그러나 심근 기능이나 좌심실의 리모델링 경과엔 유의한 차이가 없었다.