• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.367-380
• /
• 2013

In this paper, an analytical threshold voltage model is developed for a short-channel double-material-gate (DMG) strained-silicon (s-Si) on silicon-germanium ($Si_{1-X}Ge_X$) MOSFET structure. The proposed threshold voltage model is based on the so called virtual-cathode potential formulation. The virtual-cathode potential is taken as minimum channel potential along the transverse direction of the channel and is derived from two-dimensional (2D) potential distribution of channel region. The 2D channel potential is formulated by solving the 2D Poisson's equation with suitable boundary conditions in both the strained-Si layer and relaxed $Si_{1-X}Ge_X$ layer. The effects of a number of device parameters like the Ge mole fraction, Si film thickness and gate-length ratio have been considered on threshold voltage. Further, the drain induced barrier lowering (DIBL) has also been analyzed for gate-length ratio and amount of strain variations. The validity of the present 2D analytical model is verified with ATLAS$^{TM}$, a 2D device simulator from Silvaco Inc.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.303.1-303.1
• /
• 2014

좋은 전기적 특성을 가지면서 소자의 크기를 줄이기에 용이한 Gate-all-around (GAA) twin Si nanowire field-effect transistors (TSNWFETs)의 연구가 많이 진행되고 있다. Switching 특성과 단채널 효과가 없는 TSNWFETs의 특성은 GAA 구조의 본질적인 특성이다. TSNWFETs는 기존의 single Si nanowire TSNWFETs와 bulk FET에 비하여 Drive current가 nanowire의 지름에 많은 영향을 받지 않는다. 그러나 TSNWFETs의 전체 on-current는 훨씬 작고 nanowire의 지름이 작아지면서 줄어들게 되면서 소자의 sensing speed와 sensing margin 특성의 악화를 가지고 온다. GAA TSNWFETs의 제작 및 전기적 실험에 대한 연구는 많이 진행되었으나, GAA TSNWFETs의 전기적 특성에 대한 이론적 연구는 매우 적다. 본 연구에서는 GAA TSNWFETs의 nanowire 크기에 따른 전기적 특성을 관찰하였다. GAA TSNWFETs와 bulk FET의 전기적 특성을 양자역학을 고려하여 3차원 TCAD 시뮬레이션을 툴을 이용하여 계산하였다. GAA TSNWFETs와 bulk FET의 전류-전압 특성 계산을 통해 on-current 크기, subthreshold swing, drain-induced barrier lowering (DIBL), gate-induced drain leakage를 보았다. 전류가 흐르는 경로와 전기적 특성의 물리적 의미에 대한 연구를 위해 TSNWFETs에서의 전류 밀도, conduction band edge, potential 특성을 분석하였다. 시뮬레이션 결과를 통해 Switching 특성, 단채널 효과에 대한 면역 특성, nanowire의 단면적에 따른 전류 흐름을 보았다. nanowire의 크기가 작아지면서 DIBL이 증가하고 문턱전압과 전체 on-current는 감소하면서 소자의 특성이 악화된다. 이러한 결과는 GAA TSNWFETs의 전기적 특성을 이해하고 좋은 소자 특성을 위한 구조를 연구하는데 많은 도움이 될 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.486-489
• /
• 2002

In this paper, we have investigated characteristics of sub-50nm double gate MOSFET. From I-V characteristics, we obtained =510$\mu$A/${\mu}{\textrm}{m}$ at VMG=VDS=1.5V and VSG=3.0V. Then, the transconductance is 111$\mu$A/V, subthreshold slope is 86mV/dec and DIBL (Drain Induced Barrier Lowering) is 51.3mV. Also, we have presented that TCAD simulator is suitable for device simulation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.390-397
• /
• 2001

A novel self-aligned ESD (Elevated Source Drain) MOSFET structure which can effectively reduce the GIDL (Gate-Induced Drain Leakage) current is proposed and analyzed. The proposed ESD structure is characterized by sidewall spacer and recessed-channel depth which are determined by dry-etching process. Elevation of the Source/Drain extension region is realized so that the low-activation effect caused by low-energy ion implantation can be avoided. Unlike the conventional LDD structures, it is shown that the GIDL current of the ESD structure is suppressed without sacrificing the maximum driving capability. The main reason for the reduction of GIDL current Is the decreased electric field at the point of the maximum band-to-band tunneling as the peak electric field is shifted toward the drain side.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.3
• /
• pp.134-140
• /
• 2002

Deep submicron NMOSFETs with elevated source/drain can be fabricated using self-aligned selective epitaxial growth(SEG) of silicon for enhanced device characteristics with shallow junction compared to conventional MOSFETs. Shallow junctions, especially with the heartily-doped S/D residing in the elevated layer, give hotter immunity to Yt roll off, drain-induced-barrier-lowering (DIBL), subthreshold swing (SS), punch-through, and hot carrier effects. In this paper, the characteristics of both deep submicron elevated source/drain NMOSFETs and conventional NMOSFETs were investigated by using TSUPREM-4 and MEDICI simulators, and then the results were compared. It was observed from the simulation results that deep submicron elevated S/D NMOSFETs having shallower junction depth resulted in reduced short channel effects, such as DIBL, SS, and hot carrier effects than conventional NMOSFETs. The saturation current, Idsat, of the elevated S/D NMOSFETs was higher than conventional NMOSFETs with identical device dimensions due to smaller sheet resistance in source/drain regions. However, the gate-to-drain capacitance increased in the elevated S/D MOSFETs compared with the conventional NMOSFETs because of increasing overlap area. Therefore, it is concluded that elevated S/D MOSFETs may result in better device characteristics including current drivability than conventional NMOSFETs, but there exists trade-off between device characteristics and fate-to-drain capacitance.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.270-274
• /
• 2016

This article investigates the use of the Gaussian-channel doping profile for the control of the short-channel effects in the double-gate MOSFET whereby a two-dimensional (2D) quantum simulation was used. The simulations were completed through a self-consistent solving of the 2D Poisson equation and the Schrodinger equation within the non-equilibrium Green’s function (NEGF) formalism. The impacts of the p-type-channel Gaussian-doping profile parameters such as the peak doping concentration and the straggle parameter were studied in terms of the drain current, on-current, off-current, sub-threshold swing (SS), and drain-induced barrier lowering (DIBL). The simulation results show that the short-channel effects were improved in correspondence with incremental changes of the straggle parameter and the peak doping concentration.

• Electrical & Electronic Materials
• /
• v.7 no.3
• /
• pp.225-230
• /
• 1994

In this paper, we have fabricated short channel MOSFETs with these parameters to verify the validity of process parameters extraction by DTC method. The experimental results of fabricated short channel devices according to the optimal process parameters demonstrate good device characteristics such as good drain current-voltage characteristics, low body effects and threshold voltage of$\leq$+-.1.0V, high punch through and breakdown voltage of$\leq$12V, low subthreshold swing(S.S) values of$\leq$105mV/decade.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.104-110
• /
• 2021

A novel selective oxidation process has been developed for low source/drain (S/D) series resistance of the fin channel metal oxide semiconductor field effect transistor (MOSFET). Using this technique, the selective oxidation fin-channel MOSFET (SoxFET) has the gate-all-around structure and gradually enhanced S/D extension regions. The SoxFET demonstrated over 70% reduction in S/D series resistance compared to the control device. Moreover, it was found that the SoxFET behaved better in performance, not only a higher drive current but also higher transconductances with suppressing subthreshold swing and drain induced barrier lowering (DIBL) characteristics, than the control device. The saturation current, threshold voltage, peak linear transconductance, peak saturation transconductance, subthreshold swing, and DIBL for the fabricated SoxFET are 305 ㎂/㎛, 0.33 V, 13.5 𝜇S, 76.4 𝜇S, 78 mV/dec, and 62 mV/V, respectively.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.261-266
• /
• 1998

This paper describes the fabrication and characterization of dual-polysilicon gated surface channel 0.1$\mu\textrm{m}$ CMOSFETs using BF2 and arsenic as channel dopants. We have used and LDD structure and 40${\AA}$ gate oxide as an insulator. To suppress short channel effects down to 0.1$\mu\textrm{m}$ channel length, shallow source/drain extensions implemented by low energy implantation and SSR(Super Steep Retrograde) channel structure were used. The threshold voltages of fabricated CMOSFETs are 0.6V. The maximum transconductance of nMOSFET is 315${\mu}$S/$\mu\textrm{m}$, and that of pMOSFET is 156 ${\mu}$S/$\mu\textrm{m}$. The drain saturation current of 418 ${\mu}$A/$\mu\textrm{m}$, 187${\mu}$A/$\mu\textrm{m}$ are obtained. Subthreshold swing is 85mV/dec and 88mV/dec, respectively. DIBL(Drain Induced Barrier Lowering) is below 100mV. In the device with 2000${\AA}$ thick gate polysilicon, depletion in polysilicon near the gate oxide results in an increase of equivalent gate oxide thickness and degradation of device characteristics. The gate delay time is measured to be 336psec at operation voltage of 2V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.9-9
• /
• 2001

Nano-scale의 게이트 길이를 가지는 MOSFET소자는 접합 깊이가 20∼30㎚정도로 매우 얕은 소스/드레인 확장 영역을 필요로 한다. 본 연구에서는 $As₂^ +$ 이온의 10keV이하의 낮은 에너지 이온 주입과 RTA(rapid thermal annealing)공정을 적용하여 20㎚이하의 얕은 접합 깊이와 1.O㏀/□ 이하의 낮은 면저항 값을 가지는 $n ^+$-p접합을 구현 하였다. 이렇게 형성된 $n^ +$-p 접합을 nano-scale MOSFET소자 제작에 적용 시켜서 70㎚의 게이트 길이를 가지는 NMOSFET을 제작하였다. 소스/드레인 확장 영역을 $As₂^ +$ 5keV의 이온 주입으로 형성한 100㎚의 게이트 길이를 가지는 NMOSFET의 경우, 60mV의 낮은 $V_ T$(문턱 전압감소) 와 87.2㎷의 DIBL (drain induced barrier lowering) 특성을 확인하였다. $10^20$$㎝^ -3$이상의 도핑 농도를 가진 abrupt한 20㎚급의 얕은 접합, 그리고 이러한 접합이 적용된 NMOSFET소자의 전기적 특성들은 As₂/sup +/의 낮은 에너지의 이온 주입 기술이 nano-scale NMOSFET소자 제작에 적용될 수 있다는 것을 제시한다.