• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.33-42
• /
• 2018

This paper is based on the suggestions of the prior research on the buyer feedback, the selection of various product options, and the payment procedure improvements for Korea ON-line E-Procurement System(KONEPS), and this is to confirm the necessity of improvement and satisfaction from the viewpoint of the workers of the public and subordinate organizations the purchasing and using of the computer equipment in the actual KONEPS(Korea ON-line E-Procurement System). Based on the basic questionnaires and in-depth interviews, this paper conducts the qualitative case studies on IT and non - IT workers who had purchasing experiences for equipment at public institutions and government agencies in Gyeongbuk province. As results of the study, it was confirmed that the improvement is necessary for the buyer feedback and option selection part, and that there is a difference among the work experience for the simplification of the payment procedure and the satisfaction. In addition, the biggest contribution in the provided research is to categorize and to analyze the opinions on the use of public and relevant subordinate research participants. Additional work will be needed for a large number of workers in public and subordinate organizations who have purchasing experiences for handling various procurement products and those working in the metropolitan area and other public and subordinate agencies.

• Journal of Distribution Research
• /
• v.14 no.1
• /
• pp.27-44
• /
• 2009

This research classified the customer service factor of on-line shopping mall into tangibility, reliability, responsiveness, and empathy and analyzed the effect that the factors affect to consumer's purchase and re-purchase. If we present suggestions on the basis of these results of study, we would provide next two points: First, purchasers have utilized online shopping mall who pursued free from hard sell that being done in off-line and convenience of purchase affected more by reliability and responsiveness such as the fame of shopping mall that visit, reliability of security, and quick product search than the Customer of After-purchase Feedback influence for online purchasers decision factor out of consumer's purchase and re-purchase by on-line shopping mall customer service factor. Second, This study analyzed that online re-purchaser recognized the Customer of After-purchase Feedback factor high and built their loyalty through friendly emotion of on-line shopping mall and satisfaction of shopping mall service, and recommendation. In addition, they behave themselves as an affirmative messenger that is role of the Customer of After-purchase Feedback that make active opinion presentation and participation through community by important adjustment impact that empathy factor of on-line shopping mall customer service.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.537-544
• /
• 2013

This study was to determine the effect of 12-week balance training with visual feedback on balance and walking functions in patients with post-stroke hemiparesis. Twenty individuals with chronic stroke volunteered to participate in this study. They were randomly allocated to either experimental group (EG) or control group (CG), with 10 subjects in each group. Subjects from the group 1 underwent 15-min balance training with visual feedback and 15-min routine-scheduled physical therapy, and subjects from the group 2 performed 30-min routine-scheduled physical therapy only, which comprised mat exercise, strengthening, postural correction, and functional practice. Assessment tools were made with the Functional Reach Test (FRT), Timed Up and Go Test (TUGT), and 6 Min Walk Test (6MWT). In within-group comparison, the EG showed significant differences in all parameters (p<0.05), while significant differences were not found for the CG (p>0.05). In between-group comparison, the change values of the FRT and 6MWT appeared to be significantly greater for the EG than those of the CG (p<0.05). These findings suggest that balance training with visual feedback may be favorably used to improve balance and walking functions in patients with chronic post-stroke hemiparesis. Further studies with larger sample and long-term follow-up period need to generalize the results of this study.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.3
• /
• pp.217-224
• /
• 2020

The use of a high gain flight control system to achieve high bandwidth performance increase the instability of a helicopter. To investigate these phenomena numerically, high fidelity EC155B1 helicopter model and simplified flight control system that include actuator, digital processor and noise rejection filter was developed. A study conducts an analytical investigation of roll axis stability of the helicopter model as feedback gain increases. And this study analyzes roll-rate and roll-attitude feedback gains limited by rotor flap mode. The results indicate that the phase delays caused by the filter can severely limit the usable values of the roll-rate and roll-attitude feedback gains.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1083-1093
• /
• 2000

This paper is concerned with the real-time automatic tuning of the positive position feedback controller for smart structures by the genetic algorithms. The genetic algorithms haute proven its effectiveness in searching optimal design parameters without falling into local minimums thus rendering globally optimal solutions. The advantage of the positive position feedback controller is that if it is tuned properly it can enhance the damping value of a target mode without affecting other modes. In this paper, we develop for the first time a real-time algorithm for determining a tuning frequency of the PPF controller based on the genetic algorithms. To this end, the digital PPF control law is downloaded to the DSP chip and a main program, which runs the genetic algorithms in real time, updates the parameter of the controller in real time. Hence, any kind of control including the positive position feedback controller can be used in adaptive fashion in real time. Experimental results show that the real-time tuning of the positive position feedback controller can be achieved successfully. so that vibrations are suppressed satisfactorily.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.135-143
• /
• 1998

Several equalizers are applied to the DVD-ROM(Digital Versatile Disc-Read Only Memory) system. Because imperfect writing process may cause nonlinear distortion in the reply signal, neural equalizers which have strong nonlinear mapping capability are applied to the system to compensate the nonlinear distortion. Experimental results to verify that the combination of decision-feedback type equalizers and modulation code is formidable are also given. The experimental results shwo that the SNR gain of the neural equalizers over the conventional equalizers becomes much as the nonlinearity in the channel increases. Furthermore, the decision-feedback type equalizers outperform the equalizers which have no decision-feedback in eliminating ISI(Intersymbol Interference) of random data sequence but there is no performance gain of the decision-feedback type equalizers over the equalizers without decision-feedback when these are applied to compensate the ISI of modulation-encoded data sequence.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.192-197
• /
• 2014

In this paper, $3^{rd}$ SDM with FDPA(Feedback Delay Pass Addition) technique to improve the input range is proposed. Conventional architecture with $3^{rd}$ transfer function is just made as adding a digital delay path in $2^{nd}$ SDM architecture. But the input range is very small because feedback path into the first integrator is increased. But, proposed architecture change feedback path into the first integrator to the second integrator, so input range could be improved about 9dB. The $3^{rd}$ SC SDM with only one operational amplifier was implemented using double-sampling technique. Simulation results for the proposed SDM designed in $0.18{\mu}m$ CMOS technology with power supply voltage 1.8V, signal bandwidth 20KHz and audible sampling frequency 2.8224MHz show SNR(Signal to Noise Ratio) of 83.8dB, the power consumption of $700{\mu}W$ and Dynamic Range of 82.8dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.164-171
• /
• 2008

Adaptive equalizers are inevitable schemes in digital communication systems for compensating the transmission channel distortion. Additionally, to obtain the required BER(Bit Error Rate), the adaptive algorithms appropriate to the mobile communication channels are required. In this paper, we propose the NPDFE (Noise-Predictive Decision Feedback Equalizer) for communication systems performance improvement in mobile communication channels. The performance of the proposed NPDFE with QPSK (Quadrature Phase Shift Keying) is simulated under AWGN (Additive White Gaussian Noise), Ricean fading, ETSI (European Telecommunications Standards Institute) fading, and Rayleigh fading channels. The equalizers used in simulations are a LE (Linear Equalizer), a DFE (Decision Feedback Equalizer), and a NPDFE. Moreover, the equalizer performance criterion of the QPSK is the BER.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.46-52
• /
• 2014

This paper presents a multiple gain controlled digital phase and frequency detector with a fast lock-time. Lock-time of the digital PLL can be significantly reduced by applying proposed adaptive gain control technique. A loop gain of the proposed digital PLL is controlled by three conditions that are very large phase difference between reference and feedback signal, small phase difference and before lock-state, and after lock-state. The simulation result shows that lock-time of the proposed multiple gain controlled digital PLL is 100 times faster than that of the conventional structure with unit gain mode.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.183-187
• /
• 2008

This paper describes a power control scheme to improve the performance of a fuel cell battery hybrid power source for residential application. The proposed power control scheme includes a power control strategy to control the power flow of the fuel cell hybrid power system and a digital control technique for a front-end dc-dc converter of the fuel cell. The power control strategy enables the fuel cell to operate within the high efficiency region defined by the polarization curve and efficiency curve of the fuel cell. A dual boost converter with digital control is applied as a front-end dc-dc converter to control the fuel cell output power. The digital control technique of the converter employs a moving-average digital filter into its voltage feedback loop to cancel the low frequency harmonic current drawn from the fuel cell and then limits the fuel cell output current to a current limit using a predictive current limiter to keep the fuel cell operation within the high efficiency region as well as to minimize the fuel cell oxygen starvation.