• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.34-38
• /
• 2018

An X-band microwave photonic (MWP) filter using switch-based fiber-optic delay lines has been proposed and experimentally demonstrated. It is composed of two electro-optic modulators (EOMs) and $2{\times}2$ optical MEMS-switch-based fiber-optic delay lines. By changing time-delay difference and coefficients of each wavelength signal by using fiber-optic delay lines and an electro-optic modulator, respectively, a bandpass filter or a notch filter can be implemented. For an X-band MWP filter with four channel elements, fiber-optic delay lines with the unit time-delay of 50 ps have been experimentally realized and the frequency responses corresponding to the time-delays has been measured. The measured frequency response error at center frequency and the time-delay difference error were 180 MHz at 10 GHz and 3.2 ps, respectively, when the fiber-optic delay line has the time-delay difference of 50 ps.

• 한국광학회지
• /
• 제16권6호
• /
• pp.547-552
• /
• 2005

광간섭 단층촬영(OCT)용으로 원통형 압전소자(PZT)와 단일모드 광섬유를 이용한 광경로 지연기를 제작하여 그 특성을 분석하였다. 광경로 지연기에서 발생하는 편광모드 분산은 편광조절기로 조절하였고, 열요동을 2중 광경로 지연기를 구성하여 최소화하였다. 이중 광경로 지연기는 단일 광경로 지연기에 비해 2배의 측정 깊이와 속도를 구현하여 $18.6\pm0.5{\mu}m$의 해상도. 측정 깊이 1.68 mm, 측정 녹도 360.4 mm/s를 각각 얻었다.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
• /
• pp.166-167
• /
• 2012

High packet loss rate and impatience of messages passing through optical switches are essential characteristics in Optical Burst Switching system equipped with Optic Delay Lines buffer, which have not been solved efficiently yet by current existing models. In order to capture both effects, this paper introduces an analytical model from the viewpoint of classical queuing theory with impatient customers. We then apply it to evaluate and compare two wavelength-sharing cases, (1) all delay lines share a common wavelength resource and (2) each wavelength is associated with a number of delay lines. Our numerical results suggest to implement the first case because of lower packet loss rate for a fairly broad range of traffic load.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1133-1138
• /
• 2007

DLLs(Delay Locked Loops) have widely been used in many systems in order to achieve the clock synchronization. A SMD (Synchronous Mirror Delay) structure is used both for skew reduction and for DCC (Duty Cycle Correction). In this paper, a SMD based DLL with DCC using Reduced Delay Lines is proposed in order to reduce the clock skew and correct the duty cycle. The merged structure allows the forward delay array to be shared between the DLL and the DCC, and yields a 25% saving in the number of the required delay cells. The designed chip was fabricated using a $0.25{\mu}m$ 1-poly, 4-metal CMOS process. Measurement results showed the 3% duty cycle error when the input signal ranges from 80% to 20% and the clock frequency ranges from 400MHz to 600MHz. The locking operation needs 3 clock and duty correction requires only 5 clock cycles as feature with SMD structure.

• 대한전자공학회논문지
• /
• 제13권6호
• /
• pp.1-6
• /
• 1976

탄성파 지연선의 진동자에서 전단과 지연매질사이의 접착제의 두께를 고려하여 변환손실을 계산하는 방법을 제안하며, 수치계산결과 접착제의 두께가 진동자 두께의 1/100정도 이하로 하여야 하며 전극의 두께가 진동자 두께의 1/10정도 될 때 중심주파수의 이동이 생진다. 접착제의 두께를 진동자와 거의 같거나 그 이상으로 하면 주파수 대역폭에서 현상이 점점 커지게 된다. In this paper, the methode of calculating conversion loss is proposed by considering the thickness of bonding medium between electrode and delay material in the vibrator of Elastic delay lines. As the result of computations using digital computer, it is shown that the thickness of bonding medium must be less than about 1/100 of the thickness of vibrator and when the thickness of electrode is about 1110 of vibrator, the center fnequency is shifted. When the thickness of bonding medium is equal to or more than the thickness of vibrator, the 리uctuations in frequency Bandwidth become larger and larger.

• 한국전자파학회논문지
• /
• 제26권2호
• /
• pp.213-217
• /
• 2015

본 논문에서는 밴드 패스 필터 및 노치 필터로의 용도 변환이 가능하고, 대역폭 변화가 용이한 새로운 구조의 MWP 필터를 제안하였다. 인접 채널의 단위 시간지연 차이가 50 ps인 $4{\times}2$ 광섬유 지연선로 행렬로 구성된 MWP 필터를 제작하였고, 각 채널의 시간 지연 및 MWP 필터의 주파수 응답 등의 특성을 측정하였다. RF 변조 광 신호의 시간 지연 차이와 계수를 변화시킴으로써 20 GHz와 6.67 GHz의 FSR 변화 특성을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.882-886
• /
• 2005

As the TFT-LCD panels become larger and provide higher resolution, the distributed capacitive and resistive lines induce the propagation delay, reduce the TFT-on time and deteriorate the pixel chargingratio. A number of the compensation methods, like the H-LDC (Horizontal Line Delay Compensation), have been proposed to compensate the propagation delay of the large and high resolution panels [1]. These methods, however, require the comparatively accurate gate propagation delay estimates at each column driver. In this paper, by observing the actual gate and data waveform from 15-inch XGA TFT-LCD panels, we could predict the propagation delay along the row and column line.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.439-442
• /
• 2004

Timing delays due to VLSI circuit interconnects strongly depend on neighbor line switching patterns as well as input transition time. Considering both the input transition and input switching pattern, a new analytical timing delay model is developed by using the decoupling technique of transfer multi-coupled lines into an effective single line. The analytical timing delay model can determine the timing delay of multi-coupled lines accurately as well as rapidly. It is verified by using DSM-Technology ($0.1{\mu}m$ /low-k copper-based process) that the model has excellent agreement with the results of SPICE simulation.

• 한국광학회지
• /
• 제15권4호
• /
• pp.385-390
• /
• 2004

본 논문에서는 파장 고정 광원 한 개와 2${\times}$2 광 MEMS 스위치, 그리고 광섬유 지연선로로 구성된 4-비트 선형 위상배열 안테나(Phased Array Antenna: PAA)용 광 실시간 지연선로 (True Time-Delay; TTD)의 구조를 설계하였고, 두 개의 안테나 소자로 구성된 10-GHz PAA 구동을 위해 단위 시간 지연 차이가 6 ps인 4-비트 TTD를 구현하였다. 실험 결과, 최대 시간지연 오차는 -0.4 ps로 측정되었으며, 이에 대한 최대 주사각 오차는 1.63$^{\circ}$로 나타나, 구현한 TTD의 성능이 이론치와 서로 일치하는 것을 확인하였다. 각 안테나 소자에 연결된 광 MEMS 스위치와 광섬유 지연선로의 삽입손실은 스위치 상태에 따라 최소 1.36 ㏈에서 최대 2.4 ㏈로 측정되었으며, 또한 정해진 주사각의 경우에는, 안테나 소자 간 삽입손실 차이가 최대 0.32 ㏈로 측정되었다. 안테나 소자 전단의 증폭기 이득 조정이나 가변 감쇄기를 사용하여 삽입손실을 균등화시키면, 기존의 파장 가변 광원을 이용하는 TTD 구조들 보다 안정적이며 경제적인 TTD 구조가 될 것으로 예상된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권1호
• /
• pp.8-13
• /
• 2009

In this paper, discontinuous interconnect lines are modeled as a cascaded line composed of many uniform interconnect lines. The system functions of respective uniform interconnect lines are determined, followed by its time domain response. Since the time domain response expression is a transcendental form, the waveform expression is reconfigured as an approximated linear expression. The proposed model has less than 2% error in the delay estimation.