• 한국전기전자재료학회논문지
• /
• 제30권2호
• /
• pp.63-66
• /
• 2017

This research was about shielded trench gate power MOSFET for low voltage and high speed. We used T-CAD tool and carried out process and device simulation for exracting design and process parameters. The exracted parameters was used to design shieled and conventional trench gate power MOSFET. And The electrical characteristics of shieled and conventional trench gate power MOSFET were compared and analyzed for their power device applications. As a result of analyzing electrical characteristics, the recorded breakdown voltages of both devices were around 120 V. The electric distributions of shielded and conventional trench gate power MOSFET was different. But due to the low voltage level, the breakdown voltage was almost same. And the other hand, the threshold voltage characteristics of shielded trench gate power MOSFET was superior to convention trench gate power MOSFET. In terms of on resistance characteristics, we obtained optimal oxied thickness of $3{\mu}m$.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.283-289
• /
• 2012

이 논문에서 Trench Power MOSFET의 스위칭 성능을 향상시키기 위한 Separate Gate Technique(SGT)을 제안하였다. Trench Power MOSFET의 스위칭 성능을 개선시키기 위해서는 낮은 gate-to-drain 전하 (Miller 전하)가 요구된다. 이를 위하여 제안된 separate gate technique은 얇은(~500A)의 poly-si을 deposition하여 sidewall을 형성함으로서, 기존의 Trench MOSFET에 비해 얇은 gate를 형성하였다. 이 효과로 gate와 drain에 overlap 되는 면적을 줄일 수 있어 gate bottom에 쌓이는 Qgd를 감소시키는 효과를 얻었고, 이에 따른 전기적인 특성을 Silvaco T-CAD silmulation tool을 이용하여 일반적인 Trench MOSFET과 성능을 비교하였다. 그 결과 Ciss(input capacitance : Cgs+Cgd), Coss(output capacitance : Cgd+Cds) 및 Crss(reverse recovery capacitance : Cgd) 모두 개선되었으며, 각각 14.3%, 23%, 30%의 capacitance 감소 효과를 확인하였다. 또한 inverter circuit을 구성하여, Qgd와 capacitance 감소로 인한 24%의 reverse recovery time의 성능향상을 확인하였다. 또한 제안된 소자는 기존 소자와 비교하여 어떠한 전기적 특성저하 없이 공정이 가능하다.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.15-24
• /
• 2021

본 논문에서는 CDT(Conventional Double Trench) MOSFET보다 스위칭 시간과 손실이 적은 1700 V EPDT(Extended P+ shielding floating gate Double Trench) MOSFET 구조를 제안하였다. 제안한 EPDT MOSFET 구조는 CDT MOSFET에서 소스 Trench의 P+ shielding 영역을 늘리고 게이트를 N+와 플로팅 P- 폴리실리콘 게이트로 나누었다. Sentaurus TCAD 시뮬레이션을 통해 두 구조를 비교한 결과 온 저항은 거의 차이가 없었으나 Crss(게이트-드레인 간 커패시턴스)는 게이트에 0 V 인가 시에는 CDT MOSFET 대비 32.54 % 줄었고 7 V 인가 시에는 65.5 % 감소하였다. 결과적으로 스위칭 시간 및 손실은 각각 45 %, 32.6 % 줄어 스위칭 특성이 크게 개선되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.263-267
• /
• 2014

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.

• 한국전기전자재료학회논문지
• /
• 제26권10호
• /
• pp.713-719
• /
• 2013

Power MOSFET operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. We have optimal designed planar and trench gate power MOSFET for high breakdown voltage and low on resistance. When we have designed $6,580{\mu}m{\times}5,680{\mu}m$ of chip size and 20 A current, on resistance of trench gate power MOSFET was low than planar gate power MOSFET. The on state voltage of trench gate power MOSFET was improved from 4.35 V to 3.7 V. At the same time, we have designed unified field limit ring for trench gate power MOFET. It is Junction Termination Edge type. As a result, we have obtained chip shrink effect and low on resistance because conventional field limit ring was convert to unify.

• 한국진공학회지
• /
• 제11권4호
• /
• pp.212-217
• /
• 2002

고신뢰성 트렌치 게이트 MOSFET을 제작하기 위해 트렌치 코너를 pull-back 공정과 수소 열처리 공정을 이용하여 트렌치 코너를 둥글게 만드는 기술을 개발하였고 이를 이용하여 균일한 트렌치 게이트 산화막을 성장시킬수 있었다. 그 결과 수소 열처리 하기 전에 항복전압이 29 V인 것이 수소 열처리한 후 약 36 V로 증가하여 항복 전압에서 약 25% 향상되었다. 그리고 트렌치 게이트를 이용한 MOSFET에서 트렌치 셀이 약 45,000개 일때 게이트와 소스에 10 V를 인가했을 때, 드레인 전류는 약 45.3 A를 얻었고, 게이트 전압의 10 V, 전류를 5 A를 인가한 상태에서 On-저항은 약 55 m$\Omega$ 얻었다.

• ETRI Journal
• /
• 제35권4호
• /
• pp.632-637
• /
• 2013

In this paper, we propose a superjunction trench gate MOSFET (SJ TGMOSFET) fabricated through a simple p-pillar forming process using deep trench and boron silicate glass doping process technology to reduce the process complexity. Throughout the various boron doping experiments, as well as the process simulations, we optimize the process conditions related with the p-pillar depth, lateral boron doping concentration, and diffusion temperature. Compared with a conventional TGMOSFET, the potential of the SJ TGMOSFET is more uniformly distributed and widely spread in the bulk region of the n-drift layer due to the trenched p-pillar. The measured breakdown voltage of the SJ TGMOSFET is at least 28% more than that of a conventional device.

• ETRI Journal
• /
• 제36권5호
• /
• pp.829-834
• /
• 2014

In this paper, a lateral power metal-oxide-semiconductor field-effect transistor with ultra-low specific on-resistance is proposed to be applied to a high-voltage (up to 200 V) integrated chip. The proposed structure has two characteristics. Firstly, a high level of drift doping concentration can be kept because a tilt-implanted p-drift layer assists in the full depletion of the n-drift region. Secondly, charge imbalance is avoided by an extended trench gate, which suppresses the trench corner effect occurring in the n-drift region and helps achieve a high breakdown voltage (BV). Compared to a conventional trench gate, the simulation result shows a 37.5% decrease in $R_{on.sp}$ and a 16% improvement in BV.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.259-266
• /
• 2004

In this paper. a new two types of EST(Emitter Switched Thyristor) structures are proposed to improve the electrical characteristics including the current saturation capability. Besides, the two dimensional numerical simulations were carried out using MEDICI to verify the validity of the device and examine the electrical characteristics. First, a vortical trench electrode EST device is proposed to improve snap-back effect and its blocking voltage. Second, a dual trench gate EST device is proposed to obtain high voltage current saturation characteristics and high blocking voltage and to eliminate snap-back effect. The two proposed devices have superior electrical characteristics when compared to conventional devices. In the vertical trench electrode EST, the snap-back effect is considerably improved by using the vertical trench gate and cathode electrode and the blocking voltage is one times better than that of the conventional EST. And in the dual trench gate EST, the snap-back effect is completely removed by using the series turn-on and turn-off MOSFET and the blocking voltage is one times better than that of the conventional EST. Especially current saturation capability is three times better than that of the other EST.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.392-395
• /
• 2003

For the first time, the new dual trench gate Emitter Switched Thyristor is proposed for eliminating snap-back effect which leads to a lot of serious problems of device applications. Also, the parasitic thyristor that is inherent in the conventional EST is completely eliminated in the proposed EST structure, allowing higher maximum controllable current densities for ESTs. Moreover, the new dual trench gate allows homogenous current distribution throughout device and preserves the unique feature of the gate controlled current saturation of the thyristor current. The conventional EST exhibits snap-back with the anode voltage and current density 2.73V and $354/{\S}^2$, respectively. But the proposed EST exhibits snap-back with the anode voltage and current density 0.93V and $58A/{\S}^2$, respectively. Saturation current density of the proposed EST at anode voltage 6.11V is $3797A/{\S}^2$. The characteristics of 700V forward blocking of the proposed EST obtained from two dimensional numerical simulations (MEDICI) is described and compared with that of the conventional EST.