• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.793-796
• /
• 2001

Physical properties of concrete, Such as, compressive strength, permeable pore and penetration depth of chloride ion were investigated. And to investigate the effect of containing GGBF in concrete, the diffusion coefficient of chloride was measured through an electro- migration test. The diffusion coefficient of chloride was decreased with increase of replacement ratios of GGBF when compared to OPC. Relation coefficients between physical properties of concrete and diffusion coefficient of chloride were more than 0.9.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.337-342
• /
• 1998

In this paper the lubrication performances of line pivoted pad thrust bearing and point pivoted pad thrust bearing are studied by a numerical analysis. The running characteristic parameters such as nondimensional load carrying capacity nondimensional friciton power loss nondimensional flow rate and film thickness ratios are calculated for various circumferential pivot positions. The results provide a usdful data for the selection of pivot position in a pivoted and thrust bearing.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.931-936
• /
• 1993

Optimal model following control scheme is to design the controller which makes the response of real system follow that of desirable model. This kind of design scheme is developed for first order system. We extends the scheme for second order system regarding the characteristics of mechanical second order system for vibration suppression of flexible structures. The model of mechanical second order system is obtained using suitable damping ratios and natural frequencies. Using this scheme, we can design the good controller which uses the characteristic of second order system. Numerical examples are presented which were used optimal model following control scheme.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.331-338
• /
• 2004

In this paper, stiffness and damping matrices are experimentally constructed using structural modal information on frequencies, damping ratios and modal vectors, which are obtained by shaking table tests. The acceleration of the shaking table is used as the input signal, and the resulting acceleration of each floor is measured as output signal. The characteristic and limitation of modal information from shaking table test are obtained by Common Based-normalized System Identification(CBSI) technique which is based on time domain information.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.128-133
• /
• 1994

This paper proposes a new TTL-to-CMOS converter which has low power dissipation. This converter has no static power dissipation for typical TTL output voltage levels. The simulatio result shows that the power dissipation is reduced to about 1/20 of conventional level converter using CMOS inverters. It also has hysteresis due to the positive feedback which makes the converter noise immune. The logic threshold voltages in the hysteresis characteristic can be optimized by changing the size ratios of the transistors.

• The Korean Journal of Malacology
• /
• v.29 no.4
• /
• pp.291-301
• /
• 2013

This study researched and compared the sedimentation environment and photosynthetic pigments at Gomso (GS) -bay, Yoja (YJ) -bay and KangJin (KJ) -bay in May, 2012. It was shown that KJ-bay consist of C (clay) and M (mud), and GS-bay consists of Zs (silty sand) and Sz (sandy silt). Averagely, IL of YJ-bay was 4.98%, KJ-bay 6.10%, and GS-bay 1.45%. As for COD concentration, there were no places that exceeded Japanese sediment contamination standard 20 mg/g-dry. As for AVS concentration, in case of KJ-bay, two places exceeded Japanese sediment contamination standard 0.2 mg/g-dry. If we look into the average C/N ratio of bays, YJ-bay showed 8.50, KJ-bay 6.60, and GS-bay 5.52, thus all of them showed the characteristic of oceanic origin. As for the plankton make-up classified by photosynthetic pigments, diatom was dominant, and both ratios of pigment and C/chlorophyll. a showed the relatively lower distribution at GS-bay than at KJ-bay and YJ-bay. It is judged that this is related to the characteristic of flow-in, and it implies that predation process and decomposition by organic matters actively occurs at YJ-bay and KJ-bay.

• Journal of Korean Society for Quality Management
• /
• v.24 no.3
• /
• pp.111-132
• /
• 1996

Taguchi's parameter design is to determine optimal settings of design parameters of a product or a process such that the characteristics of a product exhibit small variabilities around their target values. His analysis of the problem has focused only on a single characteristic or response, but the quality of most products is seldom defined by a characteristic, and is rather the composite of a great number of characteristics which are often interrelated and nearly always measured in a variety of units. The critical problem in dealing with multiple characteristics is how to compromise the conflicts among the selected levels of the design parameters for each individual characteristic. In this paper, the EXTOPSIS Model using SN ratio which can be optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal compromise among several different response variables is developed. Two existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, and the desirability function.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.404-411
• /
• 2012

This research numerically analyses the effects of the damping device on the operation characteristics of a free piston linear engine. In this paper, the free piston linear engine uses spring as a damping device. The investigated parameter is spring hardness which is varied at 0.5, 1, 2.9, and 14.7 N/mm. The effects of spring hardness on the dynamic characteristic, thermodynamic characteristic and electric power of the engine are investigated. Beside, the equivalent ratio is also changed to provide more information for this study. The simulation results show that, by increasing spring hardness from 0.5 to 14.7 N/mm, all of parameters related to dynamic characteristic such as piston velocity, acceleration, displacement, and frequency increase accordingly. Beside, the peak pressure in the cylinder and electric power are also increased when increasing spring hardness. The tendency is also observed at varied equivalent ratios.

• The Korean Journal of Financial Management
• /
• v.25 no.3
• /
• pp.1-32
• /
• 2008

This study examines the changes and determinants of cash to assets ratios(cash ratios) by analyzing 14,016 Korean manufacturing firms sample for the period of $1999{\sim}2004$. The major findings can be summarized as follows. First, the average cash ratios for Korean manufacturing firms have increased from 4.7 percent of 1999 to 5.2 percent of 2004. In addition, the average cash holdings per firm also have increased from 4.3 billion Won to 8.0 billion Won during the same period. However, the capital expenditures relative to cash ratios or operating cash flow have decreased significantly, confirming the notion that physical investment of Korean manufacturing sector has been shrinking recently. Second, in regression tests with panel data, the coefficients of target adjustment variables show the expected negative signs, but coefficients of the deficit of fund variables show the unexpected positive signs. Thus, the evidence seems to be supportive of static tradeoff model of cash holdings. Third, in regression tests to find the determinants of cash ratios, most of the variables show similar results as the previous studies. However, in terms of adjusted coefficient of determination and F-statistic, the firm-characteristic variables suggested by static trade-off theory have more explanatory power than the variables suggested by pecking order theory.

• The Journal of Pediatrics of Korean Medicine
• /
• v.16 no.2
• /
• pp.101-110
• /
• 2002

The common cold is the most common pediatric infectious disease and occupies a great number of outpatients in oriental pediatrics. Because children's common cold has characteristic symptoms, we studied 276 children suffering from common cold Oriental Medicine Hospital in Kyungsan University and analyzed sex, age, chief complaints, characteristic symptoms.(period : summer 2001. 6.1.-2001.8.31, winter 2001.12.1-2002. 2. 28) The results were as follows : 1. Male to female ratios were 17: 1 in summer, 1.2: 1 in winter, 1.4: 1 in total 2. Age distribution of children from 0 to 1 was 20.29%, from 1 to 3 was 39.49%, from 3 to 6 was 32.97%, from 6 to 10 was 7.27%, over 10 was 0%, from 0 to 6 was 92.75%. 3. Frequency of chief complaints In summer : cough was 22.28%, nasal discharge was 18.39%, fever was 16.58%, secretion and sputum were 14.50%, sweating was 6.99%, nausea or vomitting were 4.92% etc. In winter : cough was 24.20%, nasal discharge was 18.03%, secretion and sputum were 16.43%, occlusion of nares was 11.64%, fever was 9.58%, nausea or vomitting were 3.88% etc. Frequency of chief complaints has seasonal difference. 4. Children's common cold has characteristic symptoms and seasonal difference. 5. Children's common cold has characteristic clinical subtype.