• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.389-394
• /
• 2003

In this paper, a shape optimization technique is applied to design of an air-conditioner mounting bracket. The mounting bracket is a structural component of an engine, on which bolts attach an air-conditioner compressor. The air-conditioner mounting bracket has a large portion of weight among the engine components. To reduce weight of the bracket, the shape is optimized using a finite element software. The compressor assembly, composed of a compressor and a bracket is modeled using finite elements. An objective function for the shape optimization of the bracket is the weight of the bracket. Two design constraints on the bracket are the first resonant frequency of the compressor assembly and the fatigue life of the bracket. The design variables are the shape of the bracket including thickness profiles of the front and back surfaces of the bracket, radius of outer bolt-holes, and side edge profiles. The coordinates of the FE nodes control the shape parameters. Optimal shapes of the bracket are obtained by using SOL200 of MSC/NASTRAN.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.219-222
• /
• 2007

The Full-Off Fitting of Movable Bracket using conventional line have received a dynamic contact impact between contact wire and pantograph of electric rolling stock, so this impact cause a rapid vibration of foreword and back near the supporting point of movable bracket. The Full-Off Fitting on Movable Bracket in conventional line differs from that in high speed line. Now conventional line have required a speed up for new electric locomotive and electric car. In speed-up track and big impact place, the Full-Off Fitting and the dropper often get demage. We have done a study of buffering function to solve that problem in conventional line. We have find a need adopting buffer fitting. It is decrease a dynamic impact between contact wire and pantograph of electric rolling stock.

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.779-789
• /
• 2012

In the kinetic theory of dense fluids the many-particle collision bracket integral is given in terms of a classical collision operator defined in the phase space. To find an algorithm to compute the collision bracket integrals, we revisit the eigenvalue problem of the Liouville operator and re-examine the method previously reported [Chem. Phys. 1977, 20, 93]. Then we apply the notion and concept of the eigenfunctions of the Liouville operator and knowledge acquired in the study of the eigenfunctions to cast collision bracket integrals into more convenient and suitable forms for numerical simulations. One of the alternative forms is given in the form of time correlation function. This form, on a further manipulation, assumes a form reminiscent of the Chapman- Enskog collision bracket integrals, but for dense gases and liquids as well as solids. In the dilute gas limit it would give rise precisely to the Chapman-Enskog collision bracket integrals for two-particle collision. The alternative forms obtained are more readily amenable to numerical simulation methods than the collision bracket integrals expressed in terms of a classical collision operator, which requires solution of classical Lippmann-Schwinger integral equations. This way, the aforementioned kinetic theory of dense fluids is made fully accessible by numerical computation/simulation methods, and the transport coefficients thereof are made computationally as accessible as those in the linear response theory.

• 대한수학회논문집
• /
• 제34권2호
• /
• pp.375-381
• /
• 2019

In this paper, we introduce an operation denoted by [$Br_e$], a bracket operation, which maps an arbitrary groupoid ($X,{\ast}$) on a set X to another groupoid $(X,{\bullet})=[Br_e](X,{\ast})$ which on groups corresponds to sending a pair of elements (x, y) of X to its commutator $xyx^{-1}y^{-1}$. When applied to classes such as d-algebras, BCK-algebras, a variety of results is obtained indicating that this construction is more generally useful than merely for groups where it is of fundamental importance.

• 대한기계학회논문집A
• /
• 제39권3호
• /
• pp.283-289
• /
• 2015

본 연구에서는 위상 최적 설계 기법을 활용하여 복합소재 대차프레임의 제동장치 브래킷 경량 설계를 수행하였다. 제동장치 브래킷은 12t 와 9t 로 각각 두 가지 모델을 대상으로 하였다. 위상최적화시 설계영역은 단면적이 가장 넓은 수직면과 수평면으로 설정하였다. 제한조건은 제동장치 브래킷의 Z 축의 변위 값을 초기 변위 값보다 2.5% 증가이고, 목적함수는 제동장치 브래킷의 질량 최소화로 하였다. 또한 최적화 계산 시간을 줄이기 위해 대차프레임을 생략하고 대차프레임 대신 1D beam 요소를 적용하여 Z 축 변위를 기준으로 전체모델과 동일하게 등가시켜 두 모델간의 상관성을 확보 하였다. 그 결과 12t 모델은 60kg, 9t 모델은 31kg 감소하였고, 최적화 모델의 유한요소해석을 통하여 안전성을 검증하였다.

• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.89-95
• /
• 2003

현재 개발중인 인공위성의 추진시스템은 크게 추진제 탱크 및 4개의 주요모듈로 구성되어 있다. 각 주요 모듈은 위성체 자세제어에 필요한 펄스 모멘텀, 추진제와 가압제의 공급/배출, 추진제 여과, 그리고 위성체 비상상태에서늬 유로변경 기능 들을 각각 제공한다. 이러한 주요 모듈들은 각각의 지지용 브라켓에 의해 추진시스템의 플랫폼에 장착되는데 모든 발사 환경 및 궤도상에서 주요 모듈들이 정상적으로 작동할 수 있도록 각 브라켓의 설계가 적절하게 이루어져야 한다. 본 논문에서는 주요 모듈의 지지용 브라켓들에 대해 유한요소해석(FEM)을 이용한 구조해석을 수행함으로써 규정된 설계 요구조건을 만족하는지 확인하였고 이를 통해 브라켓들의 구조적 안전성을 검증하였다.

• 대한조선학회논문집
• /
• 제32권1호
• /
• pp.17-24
• /
• 1995

본 연구에서는 범용 CAD 시스템을 사용하여 상세구조 설계단계에서의 자동화 가능성을 검토하였다. 파라메트릭 개념을 가진 macro의 기능이 유효함을 확인하였고, 이 개념을 이용하여 대표적인 구조부재인 transverse web frame, slot hole & collar plate 그리고 bracket의 설계에 적용하였다.

• 한국농촌건축학회논문집
• /
• 제18권1호
• /
• pp.19-28
• /
• 2016

This research aimed to suggest a standard design that reflects Hanok design tendency, and present a selective design that can fulfill a building owner's intention beyond the simple function of building permit or report. In addition, this research attempted to become a standard by establishing a criterion in calculating the measurements of section design or primary framework members, in order to be a guideline for designing Hanok in different sizes and forms. The results are as follows. The building area of Hanok standard design was set to be below $85m^2$, with a straight type of $83.16m^2$ and an L-shape of $84.24m^2$. By dividing the plane into a straight type and L-shape, two straight types were suggested: 'general type' and 'large living room type.' The upper floor space, along with the main room and small room, was proposed as an option to be changed into a room where an underfloor heating is installed depending on the building owner's intention. In addition, a criterion for side design and calculation of framework measurements was suggested and applied, while a five-girder design without high pillars was suggested for material-assembling structure. Two types of pillars-circumference and square cylinder-were proposed for the building owner to choose from, and a pointed beam house and ikgong(orthogonally-projected bracket) house were suggested for pojak bracket structure so either of them could be chosen according to the building owner's taste and economic condition. Finally, the sectional size of main materials were divided according to the form of pojak bracket structure to be proposed.

• 농촌의학ㆍ지역보건
• /
• 제32권1호
• /
• pp.1-12
• /
• 2007

Objectives: This study was performed to provide the fundamental data available in the field of the elderly health of the low-income bracket by researching and comparing related factors for the assessment of the degree of depression and cognitive function between elderly welfare recipients and non-elderly welfare recipients. Methods: The study subjects, 402 elderly person over 65-year-old in Daejeon were interviewed, during the two-month from May to June 2006, about their general characteristics, depression and cognitive function. Results: elderly welfare recipients was higher than non-elderly welfare recipients in degree of depression on the other hand, in cognitive function is lower. Also, the depression and cognitive function were related with not only socio-demographic characteristics like the age, the degree of education, the presence of spouse or not and the health status but also health behavior characteristics like the sleeping time, the drinking and the exercise. Conclusions: The project of health promotion and programs that can improve the related factors to the depression and cognitive function for elderly welfare recipients should be developed and practiced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1130-1135
• /
• 2003

The need to increase the reliability of a structural system has been significantly brought in the procedure of real designs to consider, for instance, the material properties or geometric dimensions that reveal a random or incompletely known nature. Reliability based design optimization of a real system now becomes an emerging technique to achieve reliability, robustness and safety of these problems. Finite element analysis program and the reliability analysis program are necessary to evaluate the responses and the probabilities of failure of the system, respectively. Moreover, integration of these programs is required during the procedure of reliability based design optimization. It is well known that reliability based design optimization can often have so many local minima that it cannot converge to the specified probability of failure. To overcome this problem, barrier function method in reliability based design optimization is suggested. To illustrate the proposed formulation, reliability based design optimization of a bracket is performed. AMV and FORM are employed for reliability analysis and their optimization results are compared based on the accuracy and efficiency.