• 제목/요약/키워드: bias reference

검색결과 213건 처리시간 0.035초

고려상품군을 반영한 준거가격효과의 모형화: Empirical Bayes & Latent Class Approach (Modeling the Effect of Consideration Set-Based Reference Price: Empirical Bayes & Latent Class Approach)

  • 장광필
    • Asia Marketing Journal
    • /
    • 제8권1호
    • /
    • pp.1-17
    • /
    • 2006
  • 다양한 선행연구에서 준거가격효과는 실증적 지지를 받아온 것이 사실이다. 그러나 대부분의 선행연구에서 간과된 부분은 설명되지 않은 소비자 반응의 이질성이 준거가격에 반영되어 실재하지 않는 효과가 마치 유의한 것으로 나타날 수도 있다는 것이다(Chang, Siddarth, and Weinberg 1999; Bell and Lattin 2000). 또 다른 차원의 이질성으로서, 고려상표군의 이질성이 반영되지 않을 경우 모델에 포함된 변수의 모수추정치에 왜곡현상이 나타날 수 있음을 Meyer and Kahn(1991)이 지적한 바 있다. 이러한 선행연구의 문제점을 고려하여 이 연구에서는 반응의 이질성과 고려상표군의 이질성을 모두 반영한 모델을 적용함으로써 보다 정확한 준거가격효과의 추정을 시도하였다. 또한 소비자별 고려상표군의 이질성을 반영한 준거가격 측정치를 새롭게 제안하여 검증하고자 하였다. 실증분석결과, 제안된 준거가격 측정치가 선행연구에서 사용한 측정치에 비해 모델적합도와 예측타당성을 향상시키는 것으로 나타났다. 이 결과는 준거가격 형성과정에도 고려상표군의 이질성이 반영됨을 실증하는 것이다. 고려상표군의 이질성이 반영될 경우, 선행연구의 준거가격 측정치에 비해서, 제안된 준거가격 측정치의 평균이 높게 나타났으며, 표준편차는 감소한 것으로 나타났다. 이 연구에서 제안된 측정치의 실제적인 적용 측면을 본다면, Greenleaf(1995)의 연구에서처럼, 최적의 가격정책이 손실회피(loss aversion)의 크기, 즉, 준거의존(reference-dependent) 모델상의 준거가격에 의존한다면 제안된 측정치가 유용하게 사용될 수 있을 것으로 판단된다. 최대화해야 할 이익함수에 포함된 준거가격 측정치의 정확성이 최적가격결정을 좌우하기 때문이다. 따라서, 준거가격모델에 근거하여 최적가격을 추정할 경우, 모델자체에 고려상표군과 반응의 이질성을 반영할 뿐만 아니라, 준거가격 측정치 또한 고려상표군의 이질성을 반영하는 것이 바람직할 것으로 판단된다.

  • PDF

Elimination of Clock Jump Effects in Low-Quality Differential GPS Measurements

  • Kim, Hee-Sung;Lee, Hyung-Keun
    • Journal of Electrical Engineering and Technology
    • /
    • 제7권4호
    • /
    • pp.626-635
    • /
    • 2012
  • Most of single frequency GPS receivers utilize low-quality crystal oscillators. If a lowquality crystal oscillator is utilized as the time reference of a GPS receiver, the receiver's clock bias grows very fast due to its inherent low precision and poor stability. To prevent the clock bias becoming too large, large clock jumps are intentionally injected to the clock bias and the time offset for clock steering purpose. The abrupt changes in the clock bias and the time offset, if not properly considered, induce serious accuracy degradation in relative differential positioning. To prevent the accuracy degradation, this paper proposes an efficient and systematic method to eliminate the undesirable clock jump effects. Experiment results based on real measurements verify the effectiveness of the propose method.

A 1.8V 50-MS/s 10-bit 0.18-um CMOS Pipelined ADC without SHA

  • 어지훈;김원영;김상훈;장영찬
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.143-146
    • /
    • 2011
  • 본 논문은 1.2Vpp differential 입력 범위를 가지는 50-MS/s 10-hit pipelined ADC를 소개한다. 설계된 pipelined ADC는 8단의 1.5bit/stage, 1단의 2bit/stage와 digital correction 블록, bias circuit 및 reference driver, 그리고 clock generator로 구성된다. 1.5bit/stage는 sub-ADC, DAC, gain stage로 구성된다. 특히, 설계된 pipelined ADC에서는 hardware와 power consumption을 줄이기 위해 SHA를 제거하였으며, 전체 ADC의 dynamic performance를 향상시키기 위해 linearity가 개선된 bootstrapped switch를 사용하였다. Sub-ADC를 위한 reference 전압은 외부에서 인가하지 않고 on-chip reference driver에서 발생시킨다. 제안된 pipelined ADC는 1.8V supply, $0.18{\mu}m$ 1-poly 5-metal CMOS 공정에서 설계되었으며, power decoupling capacitor를 포함하여 $0.95mm^2$의 칩 면적을 가진다. 또한, 60mW의 전력소모를 가진다. 또한, Nyquist sampling rate에서 9.3-bit의 ENOB를 나타내었다.

  • PDF

우주측지기술을 이용한 지구기준좌표계 결정 (Determination of Terrestrial Reference Frame using a Space Geodetic Technique)

  • 유성문;조정호
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2010년 춘계학술발표회 논문집
    • /
    • pp.43-44
    • /
    • 2010
  • We present the analysis of space geodetic technique observation, Satellite Laser Ranging (SLR), to LAGEOS1 and LAGEOS2 for the definition of the Terrestrial Reference Frame (TRF). The data were analyzed in 7day arcs during about 9 years (2000/01/10 ~ 2008/12/29) using NASA Goddard's GEODYN/SOLVE II software. The comparison of the coordinates between ITRF2005 and TRF solutions determined in this work shows that there is no significant bias.

  • PDF

자성체포화를 이용한 DC전류센서 (DC Current sensor using the saturable magnetic cores)

  • 박영태
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
    • /
    • pp.699-702
    • /
    • 2002
  • A DC current sensor is disclosed in which two pairs of saturable cores are provided so as enclose a conductor carrying a direct current to be measured. On each of the saturable cores, a bias winding, a feedback winding and an output winding are wound. Circuit for detection of an asymmetry in the magnetization current, generated by a reference alternating voltage, in a signal-conditioner. The reference alternating voltage is fed to the respective series circuits such that no resultant induction current is induced in the modulating current. The voltages over the resistor form input signals for two peak value detectors, the strength of the output signal of which represents the degree of asymmetry of magnetization current. This paper describes the development a DC current sensor and its signal-conditioner.

  • PDF

UKF를 사용한 AHRS의 자기장 측정 편차 추정 (Bias Estimation of Magnetic Field Measurement by AHRS Using UKF)

  • 고낙용;송경섭;정석기;이종무;최현택;문용선
    • 한국해양공학회지
    • /
    • 제31권2호
    • /
    • pp.177-182
    • /
    • 2017
  • This paper describes an unscented Kalman filter approach to estimate the bias in magnetic field measurements. A microelectromechanical systems attitude heading reference system (MEMS AHRS) was used to measure the magnetic field, together with the acceleration and angular rate. A magnetic field is usually used for yaw detection, while the acceleration serves to detect the roll and pitch. Magnetic field measurements are vulnerable to distortion due to hard-iron effect and soft-iron effect. The bias in the measurement accounts for the hard-iron effect, and this paper focuses on an approach to estimate this bias. The proposed method is compared with other methods through experiments that implement the navigation of an underwater robot using an AHRS and Doppler velocity log. The results verify that the compensation of the bias by the proposed method improves the navigation performance more than or comparable to the compensation by other methods.

Reference Evapotranspiration Calculator Software를 이용한 기상관측소 기준증발산 추정 (Estimation on Trends of Reference Evapotranspiration of Weather Station Using Reference Evapotranspiration Calculator Software)

  • 최원호;최민하;오현제;박주양
    • 대한토목학회논문집
    • /
    • 제30권2B호
    • /
    • pp.219-231
    • /
    • 2010
  • Reference Evapotranspiration Calculator Software (REF-ET)는 ASCE 및 FAO 기준증발산량을 포함한 총 17개의 FAO Penman-Monteith (PM) 방정식의 연산을 동시에 수행할 수 있는 프로그램으로서, 본 연구에서는 REF-ET에 대한 상세한 소개와 함께 기상관측소의 관측자료를 이용하여 REF-ET의 효용성을 논하였다. REF-ET는 각종 PM 방정식들에 대한 시일 월 단위 모의와 지역적 특성의 반영 및 결측자료에 대한 보정 등이 가능하다. REF-ET를 이용하여 서울 기상관측소의 29년간 증발산량을 모의한 결과, 일복사량에 주로 좌우되는 FAO24-Rd 식과 1957-Makk 식의 상관계수가 각각 0.89와 0.88로 높게 나타났으며, 이는 소형증발접시를 이용한 기준증발산량 관측값이 공기 동력학적 증발량만을 주로 반영하기 때문인 것으로 사료된다. 또한 RMSE/bias 분석을 통해 기준증발산 방정식들에 의한 계산값이 증발접시로부터의 기준증발산량에 비해 다소 과대평가되는 현상을 나타내었으나, 이 경우에도 1957-Makk 식이 가장 정확한 것으로 나타났다. 일단위 시계열 분석시 1957-Makk 식은 여름철의 증발산량을 저평가하는 경향을 나타내었으나, 전체적으로 1.06 mm/day의 오차로 증발산량을 모의 가능하였다. 차후 기상관측자료의 정확도를 높이는 연구들과 REF-ET를 병행한다면, 해당 지역 및 기간에 대한 증발산량 모의 및 관련 특성인자를 파악하는 연구에 활용도가 높을 것으로 기대된다.

Transient chirp 측정을 이용한 Modulator 집적 DFB 레이저 모듈의 특성해석 (Transient Chirp Analysis of Ml-DFB Laser Module)

  • 오윤경;곽계달
    • 전자공학회논문지D
    • /
    • 제35D권9호
    • /
    • pp.35-41
    • /
    • 1998
  • Modulator가 집적된 DFB 레이저 (MI-DFB Laser) 모듈의 chirp 특성을 해석하기 위하여 transient chirp 측정 방법으로 modulation 전압을 작게 하여 modulator bias 전압변화에 따른 chirp 변화를 측정하였다. Transient chirp측정을 위하여 monocrometer와 digitizing oscilloscope를 이용하여 측정시스템을 구성하였다. 측정 결과 MI-DFB 레이저 모듈의 modulator bias 전압에 따른 chirp의 변화를 직접적인 파장변화로 확인할 수 있었으며 이 방법은 패키지 특성을 포함하는 보다 정확한 chirp의 변화를 나타낸다. Modulator bias 전압에 따라 측정된 결과로부터 계산된 chirp parameter 와 peak-to-peak chirp 값도 비교하였는데 그 경향이 일치하였다. 이 측정 결과는 모듈의 chin 특성을 정확히 해석하여 시스템 적용 조건을 설정하는데 매우 유용하리라 생각한다.

  • PDF

연소를 고려한 사용후핵연료저장조 핵임계 안전성분석에서 계산체제간의 편차결정 (A Determination of Bias between Calculational Methods for the Criticality Safety Analysis of Spent Fuel Storage Pool with Burnup Credit)

  • Byung Jin Jun;Chang-Kun Lee;Hee-Chun No
    • Nuclear Engineering and Technology
    • /
    • 제18권1호
    • /
    • pp.17-26
    • /
    • 1986
  • 연소를 고려하는 사용후핵연료저장조의 핵임계 안전성 분석에서 검증용 계산 체제와 rack계산 체제 사이의 편차를 신뢰성 있게 결정하는 방법을 시험하였다. 이를 위하여 고리 1호기의 사용후핵연료저장조를 연소를 고려하는 가장 조밀한 rack으로 개념설계하고, 핵연료의 농축도 및 연소도에 따라 증배계수를 계산하였다. 표준값 생산용 Monte Carlo 코드로는 KENO-IV를 그리고 실제 rack 설계용으로는 2차원 충돌화률 코드인 FATAC을 사용하였다. 이 두 계산의 결과를 상호 비교하여 계산 체제 사이의 편차와 이의 경향성 및 신뢰도를 평가하였다. 이 방법을 사용하면 확실한 신뢰도 근거를 마련할 수 있을 뿐만 아니라 반응도 여유면에서 기존의 방법보다 불리하지 않음이 입증되었다.

  • PDF

초기 사용자 경험 단계의 확증편향에 관한 연구 (A Study on Confirmation Bias in Early User Experience Stage)

  • 이영주
    • 디지털융복합연구
    • /
    • 제19권1호
    • /
    • pp.355-360
    • /
    • 2021
  • 본 연구는 초기 사용자 경험 단계에서 발생 할 수 있는 확증 편향의 요인에 관해 요인별 사용자 경험 요소를 도출하여 허니콤 모형으로 분석하였다. 초기 사용자 경험 단계에서 확증 편향은 인상의 단계에서 발생한다. 기억의 처리단계에서는 감각기억과 작동 기억 그리고 선택적 기억을 저장하고 인출하는 장기 기억과 밀접한 관련이 있었다. 확증편향은 사용성 부분에서 가시성, 상관성, 기억성, 명확성, 보편성으로 분류되었고 감정요인으로는 만족감, 기쁨, 불만족이 도출되었다. 허니콤 모형으로 분석한 결과 사용성 요인에서 시각성, 명확성, 보편성과 감정 요인에서 기쁨은 확증편향에 미치는 영향이 미미하였으며 상관성과 기억성 그리고 감정 요인에서는 만족감과 불만족이 확증 편향의 주요요인으로 분석되었다. 본 연구는 확증 편향 요인에 대해 디자인 패턴을 커스텀화 하는 기업의 경우 참고 자료로 유용하게 활용될 수 있다는 점에서 의의를 가진다.