• 전자공학회논문지C
• /
• 제36C권11호
• /
• pp.10-17
• /
• 1999

본 논문에서는 MOS 트랜지스터로만 이루어진 CMOS IADC(Current-mode Analog-to-Digital Converter)를 설계하였다. 각 단은 CSH(Current Sample-and-Hold)와 CCMP(Current Comparator)로 구성된 1.5-비트 비트 셀로 구성되었다. 비트 셀 전단은 CFT(Clock Feedthrough)가 제거된 9-비트 해상도의 차동 CSH를 배치하였고, 각 단 비트 셀의 ADSC(Analog-to-Digital Subconverter)는 2개의 래치 CCMP로 구성되었다. 제안된 IADC를 현대 0.65 ㎛ CMOS 파라미터로 ACAD 시뮬레이션 한 결과, 20 Ms/s에서 100 ㎑의 입력 신호에 대한 SINAD(Signal to Noise-Plus-Distortion)은 47 ㏈ SNR (Signal-to-Noise)는 50 ㏈(8-bit)을 얻었고 35.7 ㎽ 소비전력 특성을 나타냈다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권1호
• /
• pp.28-35
• /
• 2007

This paper presents a high-speed flash analog-to-digital converter (ADC) for ultra wide band (UWB) receivers. In this flash ADC, the interpolating technique is adopted to reduce the number of the amplifiers and a linear and wide-bandwidth interpolating amplifier is presented. For this ADC, the transistor size for the cascaded stages is inversely scaled to improve the trade-off in bandwidth and power consumption. The active inductor peaking technique is also employed in the pre-amplifiers of comparators and the track-and-hold circuit to enhance the bandwidth. Furthermore, a digital-to-analog converter (DAC) is embedded for the sake of measurements. This chip has been fabricated in $0.13{\mu}m$ 1P8M CMOS process and the total power consumption is 113mW with 1V supply voltage. The ADC achieves 4-bit effective number of bits (ENOB) for input signal of 200MHz at 5-GSample/sec.

• ETRI Journal
• /
• 제32권1호
• /
• pp.154-156
• /
• 2010

Oscillation-based testing of analog-to-digital converters represents a viable option for low-cost built-in self-testing in mixed-signal design. While numerous papers have addressed implementation issues, little attention has been paid to the measurement accuracy. In this letter, we highlight an inherent measurement uncertainty which has to be considered when deriving the parameters from the oscillation frequency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.522-527
• /
• 1987

This paper describes the hardware of analog-to-digital converter to process the rate output of analog servo loop for the gyro rebalance of INS. The analog-to-digital converter is designed by voltage-to-frequency method which is generally used in INS, and this scheme fits well into the strapdown INS that requires the wide dynamic range and linearity. The output of the designed voltage to frequency converter is tested by computer through the counter and all the factors which affect the performance are considered.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.131-134
• /
• 2002

In this work, we have developed a systematic way of utilizing the basic design tools for superconductive electronics. This include WRSPICE, XIC, margin program, and L-meter. Since the high performance analog-to- digital converter can be built with Rapid Single Flux Quantum (RSFQ) logic circuits the development of superconductive analog-to-digital converter has attracted a lot of interests as one of the most prospective area of the application of Josephson Junction technology. One of the main advantages in using Rapid Single Flux Quantum logic in the analog-to-digital converter is the low voltage output from the Josephson junction switching, and hence the high resolution. To design an 1-bit analog-digital converter, first we have used XIC tool to compose a circuit schematic, and then studied the operational principle of the circuit with WRSPICE tool. Through this process, we obtained the proper circuit diagram of an 1-bit analog-digital converter circuit. Based on this circuit we performed margin calculations of the designed circuits and optimized circuit parameters. The optimized circuit was laid out as a mask drawing. Inductance values of the circuit layout were calculated with L-meter. Circuit inductors were adjusted according to these calculations and the final layout was obtained.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.567-572
• /
• 2004

본 논문은 무선통신 시스템에서 사용되는 자동이득조절(AGC) 알고리즘에 관한 것이다. AGC 설계는 적합한 analog-to-digital converter(ADC)의 선정과 analog-to-digital 변환 과정에서 발생되는 양자화 잡음을 최소로 하기 위해 ADC로 입력되는 신호 전력을 일정하게 유지시키는 것을 포함한다. 본 논문은 요구되는 ADC의 정밀도를 결정하는 과정을 설명하고 AGC 설계 parameter들을 결정하는 방법을 제시한다. 또한 모의실험을 통해 제시한 알고리즘의 타당성을 검증한다.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.42-48
• /
• 1994

In this paper, a low power and high speed flash Analog-to-Digital Converter using current-mode concept is proposed. Current-mode approach offers a number of advantages over conventional voltage-mode approach, such as lower power consumption small chip area improved accuracy etc. Rescently this concept was applied to algorithmic A/D Converter. But, its conversion speed is limited to medium speed. Consequently this converter is not applicable to the high speed signal processing system. This ADC is fabricated in 1.2um double metal CMOS standard process. This ADC's conversion time is measured to be 7MHz, and power consumption is 2.0mW, and differential nonlinearity is less than 1.14LSB and total harmonic distortion is -50dB. The active area of analog chip is about 350 x 550u$m^2$. The proposed ADC seems suitable for a single chip design of digital signal processing system required high conversion speed, high resolution small chip area and low power consumption.

• Journal of Electrical Engineering and Technology
• /
• 제7권3호
• /
• pp.420-428
• /
• 2012

In this paper, a novel intelligent digital redesign (IDR) technique is proposed for the nonlinear interconnected systems which can be represented by a Takagi-Sugeno (T-S) fuzzy model. The IDR technique is to convert a pre-designed analog controller into an equivalent digital one. To develop this method, the discretized models of the analog and digital closed-loop system with the decentralized controller are presented, respectively. Using these discretized models, the digital decentralized control gain is obtained to minimize the norm between the state variables of the analog and digital closed-loop systems and stabilize the digital closed-loop system. Its sufficient conditions are derived in terms of linear matrix inequalities (LMIs). Finally, a numerical example is provided to verify the effectiveness of the proposed technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.341-344
• /
• 2002

This paper is proposed a 8-bit analog to digital converter for CMOS image sensor. A analog to digital converter for CMOS image sensor is required function to control gain. Frequency divider is used In control gain in this proposed analog to digital converter. At 3.3 Volt power supply, total static power dissipation is 8㎽ and programmable gain control range is 30㏈. Newly suggested analog to digital converter is designed by 0.35um 2-poly 4-metal CMOS technology.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.149-152
• /
• 2002

The performance of a 1-bit DAC depends on that of the analog circuits. The mixed SC-CT (switched capacitor-continuous time) architecture is an effective design methodology for the analog circuits. This paper Proposes a new buffer scheme for the 1-bit digital-to-analog subconverter and a new SF-DSC(smoothing filter and differential-to-sig le converter) which performs both the smoothing filter and the differential-to-single convertor simultaneously.