• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.248-248
• /
• 2016

We have investigated the crystallinity, preferential ordering, and interfacial stability of 1,4,5,8,9,11-hexaazatriphenylene-hexanitrile (HATCN) thin film interconnected with organic/inorganic multilayer. At the region close to the organic-organic interface, HATCN formed low crystalline order with substantial amorphous phase. As film growth continued, HATCN stacked with high crystalline phase. After a sputtering deposition of the indium zinc oxide (IZO) layer on top of HATCN/organic layer, the volume fraction of preferentially ordered HATCN crystals increased without any structural deterioration. In addition, the HATCN surface was kept quite stable by preserving the sharp interface between HATCN and sputtering deposited IZO layers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1342_1342
• /
• 2009

Zinc tin oxide (ZTO) based thin-film transistors (TFTs) were fabricated on glass substrate by using sol-gel method. The fabricated ZTO TFT had bottom gate and top contact structure with ZTO layer formed by spin coating from ZTO solution. The fabricated TFT showed field-effect mobility of about 2 - $4\;cm^2/V{\cdot}s$ with on/off current ratios >$10^7$, and threshold voltage of 2 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1351-1354
• /
• 2006

In this paper, we study the effect of substrate temperature on property of Ga doped ZnO (GZO) thin film for transparent conductive oxide (TCO).GZO thin films have been deposited on corning glass 1737 by D.C. magnetron sputtering. We investigated the structural and electrical properties of GZO films using the X-Ray Diffractometer(XRD), Field Emission Scanning Electron Microscopy(FESEM) and 4-points probe .

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.250-252
• /
• 2017

High-performance full swing logic inverters were fabricated using amorphous 1 wt% Si doped indium-zinc-oxide (a-SIZO) thin films with different channel layer thicknesses. In the inverter configuration, the threshold voltage was adjusted by varying the thickness of the channel layer. The depletion mode (D-mode) device used a TFT with a channel layer thickness of 60 nm as it exhibited the most negative threshold voltage (-1.67 V). Inverters using enhancement mode (E-mode) devices were fabricated using TFTs with channel layer thicknesses of 20 or 40 nm with excellent subthreshold slope (S.S). Both the inverters exhibited high voltage gain values of 30.74 and 28.56, respectively at $V_{DD}=15V$. It was confirmed that the voltage gain can be improved by increasing the S.S value.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.580-583
• /
• 2012

The dependency of processing pressure on the electrical performances in amorphous silicon-zinc-tin-oxide thin film transistors (SZTO-TFT) has been investigated. The SZTO channel layers were deposited by using radio frequency (RF) magnetron sputtering method with different partial pressure. The field effect mobility (${\mu}_{FE}$) increased and threshold voltage ($V_{th}$) shifted to negative direction with increasing pressure during deposition processing. As a result, oxygen vacancies generated in SZTO channel layer with increasing partial pressure resulted in negative shift in $V_{th}$ and increase in on-current.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.317-318
• /
• 2007

In this study, transparent conducting oxide indium zinc oxide (IZO) thin films were deposited by pulsed laser deposition (PLD) Process as a function of the deposition time on the glass substrates at $400^{\circ}C$. The crystal structures, electrical and optical properties of IZO films analyzed by XRD, AFM, and UV spectrometer. High quality IZO thin film with the resistivity of $9.1{\times}10^{-4}$ ohm cm and optical transmittance over 85% was obtained for sample when deposition time was 15min. Thin films with the preferred orientations along the c axis were observed as the deposition time increased.

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.141-143
• /
• 2017

Novel structured thin film transistors (TFTs) of amorphous silicon zinc tin oxide (a-SZTO) were designed and fabricated with a thin metal layer between the source and drain electrodes. A SZTO channel was annealed at $500^{\circ}C$. A Ti/Au electrode was used on the SZTO channel. Metals are deposited between the source and drain in this novel structured TFTs. The mobility of the was improved from $14.77cm^2/Vs$ to $35.59cm^2/Vs$ simply by adopting the novel structure without changing any other processing parameters, such as annealing condition, sputtering power or processing pressure. In addition, stability was improved under the positive bias thermal stress and negative bias thermal stress applied to the novel structured TFTs. Finally, this novel structured TFT was observed to be less affected by back-channel effect.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.191-196
• /
• 2010

본 연구에서는 타겟 제작에 드는 비용을 줄이고, 타겟 이용의 효율성을 높이기 위해 기존의 소결된 세라믹 타겟 대신 분말 타겟으로 사용하여 알루미늄 도핑된 산화아연(Aluminum doped zinc oxde; AZO)박막을 마그네트론 스퍼터법에 의해 제조하고, 스퍼터 압력에 따른 박막 물성을 조사하였다. 유리 기판에 증착된 AZO 박막은 타깃 종류 및 스퍼터 압력에 관계없이 기판에 수직한 c-축 방향으로 우선 성장방위를 갖는 hexagonal 구조로 성장되었다. 스퍼터 압력이 증가함에 따라 이 면 방향으로의 결정성장이 촉진되었다. AZO 박막의 전기적, 광학적 특성은 스퍼터 압력 증가에 따라 향상되었으며, 15 mTorr에서 $6.5{\times}10^{-1}\;{\Omega}-cm$의 최소의 비저항 값을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.188-193
• /
• 1997

ZnO thin film had been deposited on the glass 7r sputtering method, and investigated by electrical and structural properties. When the rf power was 188W and sputtering pressure was 1$\times$10$^{-3}$ Torr at room temperature, Al-doped ZnO thin film had the lowest resistivity(1$\times$10$^{-4}$ $\Omega$.cm), and then carrier concentration and Hall mobility were 6.27$\times$10$^{20}$ cm$^{-3}$ and 22.04$\textrm{cm}^2$/V.s, respectively. And undoped ZnO thin film had about 10$^{14}$ $\Omega$.cm resistivity when oxygen content was 10% or more at room temperature. The surface morphology of ZnO thin film observed by SEM was overall uniform when oxygen content was 50% below and sputtering pressure was 1.0$\times$10$^{-1}$ Torr.

• Journal of information and communication convergence engineering
• /
• 제2권3호
• /
• pp.149-152
• /
• 2004

In this paper, we present the film bulk acoustic resonator (FBAR) devices fabricated by considering the effects of annealing temperature on zinc oxide (ZnO) film growth characteristics. In order to determine the annealing temperature and annealing time at which the ZnO film can have good material properties, the several resonators containing ZnO layers were fabricated and annealed at various temperatures from $27^{\circ}C\;to\;300^{\circ}C$ in Ar gas ambient. The effects of the annealing temperature and annealing time on the ZnO film properties were comprehensively studied in order to further improve the resonance characteristics of FBAR resonators.