• 공학기술논문지
• /
• 제10권2호
• /
• pp.203-208
• /
• 2017

Due to global climate change issues, there is a growing demand for systems throughout the industry. In the case of power conversion, studies have been actively conducted to change the structure of the power conversion circuit and to apply new power devices. In particular, the WBG (Wide Band Gap), which is newly emerged device in the market for developing semiconductor technology, has demonstrated advantages in applying for various aspects in comparison to the existing Si (Silicon) Semiconductor. Recent research centers in the railway industry are focusing on developing technologies suitable for railway vehicles by utilizing these new developments in railway countries such as Japan and Europe. This paper researches the WBG device that is applicable to the auxiliary power supplies (APS) in railway system, and analyzes the downsizing effects to APS in high-speed railway by conducting a theoretical analysis and simulation.

• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.1-16
• /
• 2023

전기차용 전력변환모듈의 성능향상 요구와 종래의 Si 전력반도체의 한계 극복을 위해 차세대 전력반도체인 wide-bandgap (WBG) 기반 전력반도체로의 전환이 가속화되고 있다. WBG 전력반도체로의 전환을 위해 전력변환모듈 패키징 소재 역시 높은 고온 내구성을 요구받고 있다. 전력변환모듈 패키징 공정 중 하나인 Ag 소결 다이접합 기술은 종래의 고온용 Pb 솔더링의 대체 기술로 주목받고 있다. 본 논문에서는 Ag 소결 다이접합 기술 관련 최신 연구동향에 대해 소개하고자 한다. 소결 다이접합 공정 조건에 따른 접합부 특성을 비교하고 Ag 소결층의 3차원 이미지 구현에 따른 다공성 Ag 소결 접합부의 물성 측정 방법론에 대해 고찰하였다. 또한 열충격 및 파워사이클 신뢰성 평가 연구동향을 분석하였다.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.17-23
• /
• 2018

Recently, electric semiconductors became an issue because of efficient use of energy and compaction of electronics. Silicon electric semiconductors are difficult to put into it because of its physical limitations. Hence, the study of WBG (Wideband Gap) semiconductors like SiC and GaN began. These devices received attention because it can be miniaturized and worked at high temperatures over $300^{\circ}C$. WBG MOSFET electric semiconductors can show performance like silicon IGBT. This can solve the current problem of IGBT tail. The current study shows the technical principles and issues related to SiC and GaN power semiconductors. WBG devices can achieve high performance compared to silicon, but its performance can't be fully utilized because of lack in bonding technology. Therefore, this review introduces research on WBG devices and their packaging issues.

• 반도체디스플레이기술학회지
• /
• 제21권2호
• /
• pp.101-106
• /
• 2022

In this paper, WBG semiconductor such as SiC and GaN were applied as power switches for LCL circuit that can be applied to satellite power systems and the test results of the LCL circuit are reported. P-channel MOSFET and N-channel MOSFET, which were generally used in the conventional LCL circuit, were applied together to expand the utility of the test results. The design and stability evaluation were performed using a Micro Cap circuit simulation program. For the test circuit, a module using each switch was manufactured, and a total of 5 modules were manufactured and the steady state and transient state characteristics were compared. From the experimental results, the LCL circuit for power supply of the satellite power system constructed in this paper satisfied the constant current and constant voltage conditions under various operating conditions. The P-channel MOSFET showed the lowest efficiency characteristics, and the three N-channel switches of Si, SiC and GaN showed relatively high efficiency characteristics of up to 99.05% or more. In conclusion, it was verified that the on-resistor of the switch had a direct effect on the efficiency and loss characteristics.

• 마이크로전자및패키징학회지
• /
• 제26권3호
• /
• pp.15-22
• /
• 2019

In these days, importance of the power electronic devices and modules keeps increasing due to electric vehicles and energy saving requirements. However, current silicon-based power devices showed several limitations. Therefore, wide band gap (WBG) semiconductors such as SiC, GaN, and $Ga_2O_3$ have been developed to replace the silicon power devices. WBG devices show superior performances in terms of device operation in harsh environments such as higher temperatures, voltages and switching speed than silicon-based technology. In power devices, the reliability of the devices and module package is the critically important to guarantee the normal operation and lifetime of the devices. In this paper, we reviewed the recent trends of the power devices based on WBG semiconductors as well as expected future technology. We also presented an overview of the recent package module and fabrication technologies such as direct bonded copper and active metal brazing technology. In addition, the recent heat management technologies of the power modules, which should be improved due to the increased power density in high temperature environments, are described.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.99-104
• /
• 2020

In this paper, efficiency and loss characteristics of GaN FET were reported by applying it into the QR flyback converter. In particular, for the comparison of efficiency characteristics, QR flyback converter experimental circuits with Si FET and with GaN FET were separately produced in 12W class. As a result of the experiment, the experimental circuit of the QR flyback converter using GaN FET reached a high efficiency of 90% or more when the load power was 2W or more, and the maximum efficiency was observed to be about 92%, and the maximum loss power was about 1.1W. Meanwhile, the efficiency of the experimental circuit with Si FET increased as the input voltage increased, and the maximum efficiency was observed to be about 82% when the load power was 9W or higher, and the maximum loss power was about 2.8W. From the results, it is estimated that that in the case of the experimental circuit applying the GaN FET switch, the power conversion efficiency was improved as the switching loss and conduction loss due to on-resistance were reduced, and the internal loss due to the synchronous rectifier was minimized. Consequently, it is concluded that the GaN FET is suitable for under 20W class power supply unit as a high efficiency power switch.

• 전자통신동향분석
• /
• 제29권6호
• /
• pp.53-62
• /
• 2014

본고는 최근 화두가 되고 있는 에너지 절감을 위해 고효율, 친환경의 WBG(Wide Band-Gap) 화합물반도체인 SiC(Silicon Carbide), GaN(Gallium Nitride) 전력반도체 소자 및 전력변환 모듈의 기술동향과 ETRI에서 연구개발 진행 중인 GaN 전력반도체 관련 기술에 대해 기술한다. WBG 전력반도체는 기존의 실리콘 전력반도체와 비교하여 열 특성 향상, 고속 스위칭, 고전압/고전류 특성 및 스위칭 손실 최소화 등이 가능하고 이에 따른 시스템의 소형화 및 전력효율 향상 효과를 얻을 수 있다. 특히, GaN 전력반도체 소자는 시장이 가장 넓게 형성되어 있는 900V 이하에 적용이 가능하며, 앞으로 시장이 커질 것으로 예상되는 HEV(Hybrid Electric Vehicle)/EV(Electric Vehicle)의 친환경 자동차에도 활용될 것으로 기대되고 있다. 본고는 최근의 일본과 미국에서의 WBG 전력반도체에 대한 관심 및 투자 방향과 GaN 전력반도체 소자에 대한 해외 기업의 업계동향에 대해서도 함께 살펴본다. 이러한 WBG 전력반도체에 대한 해외 선진업체의 산업동향과 더불어 ETRI에서 연구개발 중인 GaN 전력반도체 기술현황에 대해 전력소자 설계 및 제조공정, 패키징, 전력모듈 설계 제작 기술을 포함하여 기술한다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.19-23
• /
• 2012

This paper presents a practical methodology for realistic simulation on reverse characteristics of Wide Bandgap (WBG) SiC and GaN p-n junctions. The adjustment on certain physic-based model parameters, such as the trap density and photo-generation for SiC junction, and impact ionization coefficients and critical field for GaN junction are described. The adjusted parameters were used in Synopsys Medici simulation to obtain a realistic p-n junction avalanche breakdown voltage. The simulation results were verified through benchmarking against independent data reported by others.

• 마이크로전자및패키징학회지
• /
• 제30권2호
• /
• pp.43-51
• /
• 2023

본 논문에서는 전기차 전력변환 시스템의 근간이 되는 전력반도체 소자의 발전 방향과 차세대 전력반도체 소자인 wide bandgap (WBG)의 특징에 관해 소개하고자 한다. 현재까지의 주류인 Si insulated gate bipolar transistor (IGBT)의 특징에 관해 소개하고, 제조사 별 Si IGBT 개발 방향에 대해 다루었다. 또한 대표적인 WBG 전력반도체 소자인 SiC metal-oxide-semiconductor field-effect transistor (MOSFET)이 가지는 특징을 고찰하여 종래의 Si IGBT 소자 대비 SiC MOSFET이 가지는 효용 및 필요성에 대해 서술하였다. 또한 현 시점에서의 GaN 전력반도체 소자가 가지는 한계 및 그로 인해 전기자동차용 전력변환모듈 용으로 사용하기에 이슈인 점을 서술하였다.

• 전력전자학회논문지
• /
• 제25권3호
• /
• pp.204-212
• /
• 2020

In this study, device suitability analysis is performed by comparing the performance of SiC MOSFET and GaN Transistor, which are WBG power semiconductor devices in the induction heating (IH) system. WBG devices have the advantages of low conduction resistance, switching losses, and fast switching due to their excellent physical properties, which can achieve high output power and efficiency in IH systems. In this study, SiC and GaN are applied to a general half-bridge series resonant converter topology to compare the conduction loss, switching loss, reverse conduction loss, and thermal performance of the device in consideration of device characteristics and circuit conditions. On this basis, device suitability in the IH system is analyzed. A half-bridge series resonant converter prototype using the SiC and GaN of a 650-V rating is constructed to verify device suitability through performance comparison and verified through an experimental comparison of power loss and thermal performance.