• 제목/요약/키워드: UM

검색결과 4,755건 처리시간 0.033초

130 nm CMOS 공정을 이용한 K-Band 주파수 분배기 설계 (Design of K-Band Frequency Divider Using 130 nm CMOS Process)

  • 남상규;박득희;김성균;김병성
    • 한국전자파학회논문지
    • /
    • 제20권10호
    • /
    • pp.1107-1113
    • /
    • 2009
  • 본 논문에서는 K-Band에서 동작하는 1/2 주파수 분배기를 130 nm CMOS 공정을 이용하여 설계하고 제작한 결과를 보인다. 피드백 방식의 밀러 주파수 분배기는 20~25 GHz에서 동작하며 바이어스 전압 1.2 V에서 7.2 mW의 전력을 소모하고 코어 회로의 레이아웃 크기는 $315{\times}246\;um^2$이다. 밀러 주파수 분배기의 출력 신호를 2분 주시키기 위한 CML(Current Mode Logic) 주파수 분배기는 8.5~13 GHz에서 동작하며 5.7 mW의 전력을 소모하고, 코어 회로의 레이아웃 크기는 $91{\times}98\;um^2$이다. 또한 두 주파수 분배기를 결합하여 20~25 GHz의 입력 신호가 4분주되어 출력됨을 확인하였다.

Characteristics of ustilago maydis virus of SH14 killer strain isolated in Korea

  • Hwang, Seon-Hee;Jung, Cheong-Hwan;Yie, Se-Won
    • Journal of Microbiology
    • /
    • 제33권2호
    • /
    • pp.154-159
    • /
    • 1995
  • SH-14, a novel killer strain of Ustilago maydis was isolated in Korea. It has been reported in other papers that the toxin specificity and double-stranded RNA pattern of SH-14 strain were different from other laboratory strains. In this paper, we analyzed the biochemical characteristics of U. maydis SH-14 virus. Three distinctive peaks were isolated from CsCl density gradient, designated as top (T), intermediate (I) and bottom (B) components. We found that the densities of each components, 1.285, 1.408 g/cm$\^$3/, respectively, are very similar to those of other strains. As previously reported by the analysis of dsRNA in each component, the dsRNA segments are separately encapsidated. Capsid protein of SH-14 virus consists of two proteins about 70 Kd shown by SDS-PAGE analysis. Electron microscopic examination of the virus particles revealed that UmV particles are very similar in size and morphology to all isolates as well as all lab-strains. In order to test immunological cross reactivity of UmV, werstern bolt analysis was carriedout with antiserum against A8 virus. All capsid protein had positive reaction against A8 antibody which indicated that UmV are immunologically cross-reactive with all isolates from Korea. The results presented in this paper may show that UmV isolated from SH-14 strain has very similar biochemical characteristics to those of other UmV. However, the difference in the toxin specificity and the molecular weight of toxin protein from the SH-14 strain has us to conclude that U. maydis SH-14 strain is a new killer type.

  • PDF

단일 칩 NFC 트랜시버의 설계 (Design of single-chip NFC transceiver)

  • 조정현;김시호
    • 대한전자공학회논문지SD
    • /
    • 제44권1호
    • /
    • pp.68-75
    • /
    • 2007
  • NFC의 능동동작 모드, 수동동작 모드 및 RFID 동작 모드에 필요한 13.56MHz 트랜스미터와 리시버 및 RFID 태그 동작을 모두 지원하는 단일 칩 NFC 트랜시버를 설계 및 제작하고 동작을 검증하였다. 제안된 NFC 트랜시버는 외부전원 공급이 없어도 RFID 태그가 동작할 수 있도록 이니시에이터와 타겟의 2중 안테나 구조를 가지고 있다. 타겟 안테나는 이니시에이터 안테나의 접지 차폐층을 사용함으로써 이중 안테나의 유효면적이 단일 안테나에 비교해서 동일한 면적을 갖도록 안테나 구조를 제안하였고, 안테나의 선택 동작에 필요한 회로를 제안하였다. 제안된 NFC 단일 칩 트랜시버의 아날로그 전단부 회로는 능동모드와 RFID 리더를 위한 Reader/writer 블록의 트랜스미터와 리시버 회로부, 수동 모드와 태그 모드를 위한 태그 회로부로 구성된다. 태그 회로부는 정류기 및 부하 변조를 위한 수동소자가 포함되어 있으며, 정류기에서 생성되는 전압을 사용하여 외부 전원 없이도 태그 동작이 가능하도록 설계하였다. 제안된 트랜시버는 UART 직렬 인터페이스 회로를 통하여 호스트와 최대 212Kbps로 통신할 수 있다. 제안된 회로는 매그나칩의 0.35um 2-Poly 4-Metal CMOS공정으로 제작되었고, 칩의 유효면적은 $2200um{\times}360um$이다.

Oil-prepolymer 계면에서의 수소이온 확산을 통한 마이크로 플루이딕 칩 기반의 alginate hollow tube 제조 (Production of alginate hollow tube by diffusion of hydrogen ions at oil-prepolymer interface using a microfluidic chip)

  • 이재선;;;이내윤
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2017년도 춘계학술대회 논문집
    • /
    • pp.109-109
    • /
    • 2017
  • 알지네이트 하이드로 젤은 해조류에서 추출되는 천연 고분자인 알지네이트가 칼슘 또는 마그네슘 양이온과 이온가교(Ioninc cross linking)를 형성할 때 알지네이트의 고분자 구조가 칼슘, 마그네슘 양이온을 감싸면서 형성되는 고분자이다. 알지네이트 하이드로 젤은 높은 생체적합성(Biocompatibility)으로 인해 세포 재생을 위한 조직공학 및 재생의학, 약물전달 등의 제약 관련 분야에 광범위하게 적용될 수 있는 물질로 많은 연구가 이루어지고 있다. 본 연구에서는 마이크로 플루이딕 칩을 이용하여 알지네이트 튜브를 제조하였다. 먼저 유동 포커싱 방식(flow focussing)을 유도할 수 있는 PDMS(Polydimethylsiloxane) 마이크로 플루이딕 칩을 제조하였다. 마이크로 플루이딕 칩은 CNC(Computer Numeric Control) milling machine을 이용한 template를 만들고 NOA mold를 이용하여 최종 PDMS 칩을 제작하였다. 튜브를 만들기 위한 마이크로 채널은 내부 채널 ($200{\times}200um$), 중간 채널 ($200{\times}200um$) 및 외부 채널 ($200{\times}200um$)로 구성되며 내부, 중간, 외부의 유체가 합류하는 수집채널은 폭 500 um, 깊이 200 um로 구성되었다. 운반체로는 5%의 acetic acid를 함유한 mineral oil를 이용하였으며 내부의 core flow는 $H_2O$로 하였다. 중간 유체인 2% 알지네이트 프리폴리머는 칼슘 이온의 존재 하에서 젤화 과정이 매우 빠르기 때문에 마이크로 채널 내부에서의 반응을 제어하고 막힘을 방지하기 위해 수용성 복합 칼슘-에틸렌 디아민 테트라 아세트산 (EDTA)을 사용하였다. 본 마이크로 플루이딕 칩에 각각의 유체를 이동시켰을 때, 운반체인 oil phase의 수소이온은 중간 유체인 알지네이트 프리폴리머와의 계면을 통해 확산되어 Ca-EDTA 복합체로부터 칼슘 양이온의 방출을 유발하게 된다. 방출된 칼슘 양이온은 알지네이트 고분자와의 이온 가교를 통해 알지네이트 하이드로 젤을 형성하여, 각 유체의 flow에 따라 알지네이트 튜브를 쉽고 빠르게 제조 가능하였다. 본 연구에서 제조된 알지네이트 튜브는 인체 내 장기간 약물 전달을 위한 나노섬유로 활용하거나 인공혈관을 구성하는 extracellular matrix로 활용될 잠재력을 가지고 있어 추후 활발한 연구개발이 진행될 예정이다.

  • PDF

Electrical Characteristics of a-GIZO TFT by RF Sputtering System for Transparent Display Application

  • 이세원;정홍배;이영희;조원주
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.100-100
    • /
    • 2011
  • 2004년 일본의 Hosono 그룹에 의해 처음 발표된 이래로, amorphous gallium-indium-zinc oxide (a-GIZO) thin film transistors (TFTs)는 높은 이동도와 뛰어난 전기적, 광학적 특성에 의해 큰 주목을 받고 있다. 또한 넓은 밴드갭을 가지므로 가시광 영역에서 투명한 특성을 보이고, 플라스틱 기판 위에서 구부러지는 성질에 의해 플랫 패널 디스플레이나 능동 유기 발광 소자(AM-OLED), 투명 디스플레이에 응용될 뿐만 아니라, 일반적인 Poly-Si TFT에 비해 백플레인의 대면적화에 유리하다는 장점이 있다. 최근에는 Y2O3나 ZrO2 등의 high-k 물질을 gate insulator로 이용하여 높은 캐패시턴스를 유지함과 동시에 낮은 구동 전압과 빠른 스위칭 특성을 가지는 a-GIZO TFT의 연구 결과가 보고되었다. 하지만 투명 디스플레이 소자 제작을 위해 플라스틱이나 유리 기판을 사용할 경우, 기판 특성상 공정 온도에 제약이 따르고(약 $300^{\circ}C$ 이하), 이를 극복하기 위한 부가적인 기술이 필수적이다. 본 연구에서는 p-type Si을 back gate로 하는 Inverted-staggered 구조의 a-GIZO TFT소자를 제작 하였다. p-type Si (100) 기판위에 RF magnetron sputtering을 이용하여 Gate insulator를 증착하고, 같은 방법으로 채널층인 a-GIZO를 70 nm 증착하였다. a-GIZO를 증착하기 위한 sputtering 조건으로는 100W의 RF power와 6 mTorr의 working pressure, 30 sccm Ar 분위기에서 증착하였다. 소스/드레인 전극은 e-beam evaporation을 이용하여 Al을 150 nm 증착하였다. 채널 폭은 80 um 이고, 채널 길이는 각각 20 um, 10 um, 5 um, 2 um이다. 마지막으로 Furnace를 이용하여 N2 분위기에서 $500^{\circ}C$로 30분간 후속 열처리를 실시한 후에, 전기적 특성을 분석하였다.

  • PDF

통합모델의 초기 자료에 대한 예측 민감도 산출 도구 개발 (Development of Tools for calculating Forecast Sensitivities to the Initial Condition in the Korea Meteorological Administration (KMA) Unified Model (UM))

  • 김성민;김현미;주상원;신현철;원덕진
    • 대기
    • /
    • 제21권2호
    • /
    • pp.163-172
    • /
    • 2011
  • Numerical forecasting depends on the initial condition error strongly because numerical model is a chaotic system. To calculate the sensitivity of some forecast aspects to the initial condition in the Korea Meteorological Administration (KMA) Unified Model (UM) which is originated from United Kingdom (UK) Meteorological Office (MO), an algorithm to calculate adjoint sensitivities is developed by modifying the adjoint perturbation forecast model in the KMA UM. Then the new algorithm is used to calculate adjoint sensitivity distributions for typhoon DIANMU (201004). Major initial adjoint sensitivities calculated for the 48 h forecast error are located horizontally in the rear right quadrant relative to the typhoon motion, which is related with the inflow regions of the environmental flow into the typhoon, similar to the sensitive structures in the previous studies. Because of the upward wave energy propagation, the major sensitivities at the initial time located in the low to mid- troposphere propagate upward to the upper troposphere where the maximum of the forecast error is located. The kinetic energy is dominant for both the initial adjoint sensitivity and forecast error of the typhoon DIANMU. The horizontal and vertical energy distributions of the adjoint sensitivity for the typhoon DIANMU are consistent with those for other typhoons using other models, indicating that the tools for calculating the adjoint sensitivity in the KMA UM is credible.

2014년 계절예측시스템과 중기예측모델의 예측성능 비교 및 검증 (Verification and Comparison of Forecast Skill between Global Seasonal Forecasting System Version 5 and Unified Model during 2014)

  • 이상민;강현석;김연희;변영화;조천호
    • 대기
    • /
    • 제26권1호
    • /
    • pp.59-72
    • /
    • 2016
  • The comparison of prediction errors in geopotential height, temperature, and precipitation forecasts is made quantitatively to evaluate medium-range forecast skills between Global Seasonal Forecasting System version 5 (GloSea5) and Unified Model (UM) in operation by Korea Meteorological Administration during 2014. In addition, the performances in prediction of sea surface temperature anomaly in NINO3.4 region, Madden and Julian Oscillation (MJO) index, and tropical storms in western north Pacific are evaluated. The result of evaluations appears that the forecast skill of UM with lower values of root-mean square error is generally superior to GloSea5 during forecast periods (0 to 12 days). The forecast error tends to increase rapidly in GloSea5 during the first half of the forecast period, and then it shows down so that the skill difference between UM and GloSea5 becomes negligible as the forecast time increases. Precipitation forecast of GloSea5 is not as bad as expected and the skill is comparable to that of UM during 10-day forecasts. Especially, in predictions of sea surface temperature in NINO3.4 region, MJO index, and tropical storms in western Pacific, GloSea5 shows similar or better performance than UM. Throughout comparison of forecast skills for main meteorological elements and weather extremes during medium-range, the effects of initial and model errors in atmosphere-ocean coupled model are verified and it is suggested that GloSea5 is useful system for not only seasonal forecasts but also short- and medium-range forecasts.

500 MHz의 입력 대역폭을 갖는 8b 200 MHz 0.18 um CMOS A/D 변환기 (An 8b 200 MHz 0.18 um CMOS ADC with 500 MHz Input Bandwidth)

  • 조영재;배우진;박희원;김세원;이승훈
    • 대한전자공학회논문지SD
    • /
    • 제40권5호
    • /
    • pp.312-320
    • /
    • 2003
  • 본 논문에서는 고속 평판 디스플레이 응용을 위한 8b 200 MHz 0.18 um CMOS A/D 변환기 (Analog-to-Digital Converter:ADC)를 제안한다. 제안하는 A/D 변환기는 200 MHz의 샘플링 클럭 속도에서 샘플링 클럭 속도보다 더 높은 입력 대역폭을 얻기 위해서 개선된 bootstrapping 기법을 사용한다. Bootstrapping 기법이 적용된 샘플-앤-흘드 증폭기(Sample-and-Hold Amplifier. SHA)는 기존의 회로 보다 향상된 정확도를 가지며, 1.7 V의 전원 전압, 200 MHz의 샘플링 클럭, 500 MHz의 정현파 입력에서 SHA의 출력을 FFT(Fast Fourier Transform) 분석한 결과 7.2 비트의 유효 비트 수(effective number of bits)를 나타내었다. 또한 병합 캐패시터 스위칭 (Merged-Capacitor Switching:MCS) 기법을 사용하여 기존의 A/D 변환기에 사용되는 캐패시터의 숫자를 50 % 줄임으로써 샘플링 속도를 높임과 동시에 면적을 최소화하였다. 제안하는 40 변환기는 0.18 um n-well single-poly quad-metal CMOS 공정을 사용하여 모의 실험 되었으며, 1.7 V 전원 전압, 200 MHz의 샘플링 클럭에서 73 mW의 전력을 소모한다.

선방활명음의 항암 및 항산화효과 검증 (Cytotoxicity and Physiological Activity of SunbangHwalmyung-um)

  • 이진태;이창언;손준호;이인철;이진영;박태순;장민정;송미애;지선영;안봉전
    • 대한본초학회지
    • /
    • 제20권3호
    • /
    • pp.51-58
    • /
    • 2005
  • Objectives : The purpose of this research was physiological activities and investigate cytotoxicity of Sunbanghwalmyung-um extract. Methods : Physiological activity and a cytotoxicity were examined through the hot water and ethanol extracts from Sunbanghwalmyung-um and its ingredient. Results : The electron donating ability(EDA) was 66.9%, 71.3% in 1000 ppm water extract and ethanol extract. Above 90% from 1000 ppm ethanol extract showed a higher activities and it is Rhei Radix et Rhizoma, Lonicerae Flos, Gleditsiae Spina, Glycyrrhizae Radix, Myrrh. SOD-like activity was weak as 12.24%, 16.62% in 700 ppm. In water and ethanol extracts cytotoxicity were against G361, B16F10, MDA, A549, high cytotoxity over 70%. Rhei Radix et Rhizoma, Gleditsiae Spina, Trichosanthis Radix, Paeoniae Radix Rubra showed high cytotoxicity in water and ethanol extracts. Conclusions : We observed physiological activities and investigated cytotoxicity of Sunbanghwalmyung-um and its ingredients. The results also demonstrated in food or cosmetic industry.

  • PDF

저전력 Single-Slope ADC를 사용한 CMOS 이미지 센서의 설계 (Design of a CMOS Image Sensor Based on a Low Power Single-Slope ADC)

  • 권혁빈;김대윤;송민규
    • 대한전자공학회논문지SD
    • /
    • 제48권2호
    • /
    • pp.20-27
    • /
    • 2011
  • 모바일 기기에 장착되는 CMOS 이미지 센서(CIS) 칩은 배터리 용량의 한계로 인해 저전력 소모를 요구한다. 본 논문에서는 전력소모를 줄일 수 있는 데이터 플립플롭 회로와 새로운 저전력 구조의 Single-Slope A/D Converter(SS-ADC)를 사용한 이미지 센서를 설계하여 모바일 기기에 사용되는 CIS 칩의 전력 소모를 감소시켰다. 제안하는 CIS는 $2.25um{\times}2.25um$ 면적을 갖는 4-Tr Active Pixel Sensor 구조를 사용하여 QVGA($320{\times}240$)급 해상도를 갖도록 설계되었으며 0.13um CMOS 공정에서 설계되었다. 실험 결과, CIS 칩 내부의 SS-ADC 는 10-b 해상도를 가지며, 동작속도는 16 frame/s 를 만족하였고, 전원 전압 3.3V(아날로그)/1.8V(Digital)에서 25mW의 전력 소모를 보였다. 측정결과로부터 제안된 CIS 칩은 기존 CIS 칩에 비해 대기시간동안 약 22%, 동작시간동안 약 20%의 전력이 감소되었다.