• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (B)
• /
• pp.136-139
• /
• 2002

연관규칙 마이닝과정에서의 빈발항목 탐색의 대표적인 방법으로 알려진 Apriori 알고리즘의 성능을 향상시키기 위한 많은 연구가 진행되어 왔다. 본 논문에서는 트랜잭션 데이터베이스(TDB)에서 생성되는 각 패스의 k-itemset들에 대해 각각 트랜잭션 ID List(TIDist)를 유지하고 이를 이용해 (k+1)-itemset을 효율적으로 찾아내는 방법을 제안한다. 이 방법은 frequent (k+1)-itemset(k>0)의 빈도수 및 TIDList를 TDB 에 대한 스캔이 전혀 없이 k-itemset의 TIDList로부터 직접 구한다. 이는 빈발항목집합을 찾기 위한 탐색 complexity는 크게 줄여줄 뿐 아니라 시간 변화에 따른 빈발항목집합의 분포 정보를 제공해 준다.

• 한국항공우주학회지
• /
• 제44권3호
• /
• pp.212-217
• /
• 2016

저궤도 위성용 S대역 수신기 EM 모델을 개발 하였다. 복조기는 복조 방식의 확장성을 고려하여 복조 기능을 FPGA를 사용하여 구현하였으며 제작된 수신기는 RF 단과 디지털 복조기 그리고 전원부로 구성되고 운용상 발생되는 주파수 편이 보상을 위한 도플러 추적 기능을 가진다. 측정결과 수신기의 BER은 -110dBm의 RF입력전력에서 $1.0{\times}10^{-6}$로 측정 되었으며, 중심 주파수를 기준으로 ${\pm}100KHz$의 주파수 추적기능을 가진다. 요구된 환경 온도 테스트를 완료하였으며, TID 테스트 결과 기준치인 10Krad를 만족한다.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.540-544
• /
• 2017

In this study, we analyzed the effects of TID(Total Ionizing Dese) and TREE(Transient Radiation Effects on Electronics) on nMOSFET and pMOSFET fabricated by 0.18um CMOS process. The size of nMOSFET and pMOSFET is 100um/1um(W/L). The TID test was conducted up to 1 Mrad(Si) with a gamma-ray(Co-60). During the TID test, the nMOSFET generated leakage current proportional to the applied dose, but that of the pMOSFET was remained in a steady state. The TREE test was conducted at TEST LINAC in Pohang Accelerator Laboratory with a maximum dose-rate of $3.16{\times}10^8rad(si)/s$. In that test nMOESFET generated a large amount of photocurrent at a maximum of $3.16{\times}10^8rad(si)/s$. Whereas, pMOSFETs showed high TREE immunity with a little amount of photocurrent at the same dose rate. Based on the results of this experiment, we will progress the research of the radiation hardening for CMOS unit devices.

• Journal of Radiation Protection and Research
• /
• 제39권4호
• /
• pp.176-181
• /
• 2014

The object of this paper is to evaluate the fission product inventories and radiological doses in a non-LOCA event, based on the U.S. NRC's regulatory methodologies recommended by the TID-14844 and the RG 1.195. For choosing a non-LOCA event, one fuel assembly was assumed to be melted by a channel blockage accident. The Hanul nuclear power reactor unit 6 and the CE $16{\times}16$ fuel assembly were selected as the computational models. The burnup cross section library for depletion calculations was produced using the TRITON module in the SCALE6.1 computer code system. Based on the recently licensed values for fuel enrichment and burnup, the source term calculation was performed using the ORIGEN-ARP module. The fission product inventories released into the environment were obtained with the assumptions of the TID-14844 and the RG 1.195. With two kinds of source terms, the radiological doses of public in normal environment reflecting realistic circumstances were evaluated by applying the average condition of meteorology, inhalation rate, and shielding factor. The statistical analysis was first carried out using consecutive three year-meteorological data measured at the Hanul site. The annual-averaged atmospheric dispersion factors were evaluated at the shortest representative distance of 1,000 m, where the residents are actually able to live from the reactor core, according to the methodology recommended by the RG 1.111. The Korean characteristic-inhalation rate and shielding factor of a building were considered for a series of dose calculations.

• Journal of Semiconductor Engineering
• /
• 제1권3호
• /
• pp.81-87
• /
• 2020

An instrumentation amplifier (IA) and an analog-to-digital converter (ADC) are essential circuit blocks for accurate and robust sensor readout systems. This paper introduces recent advances in radiation-hardening by design (RHBD) techniques applied for the sensor readout integrated circuits (IC), e.g., the three-op-amp IA and the successive-approximation register (SAR) ADC, operating against total ionizing dose (TID) and singe event effect (SEE) in harsh radiation environments. The radiation-hardened IA utilized TID monitoring and adaptive reference control to compensate for transistor parameter variations due to radiation effects. The radiation-hardened SAR ADC adopts delay-based double-feedback flip-flops to prevent soft errors which flips the data bits. Radiation-hardened IA and ADC were verified through compact model simulation, and fabricated CMOS chips were measured in radiation facilities to confirm their radiation tolerance.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.16-22
• /
• 2023

In a solar cell, degradation refers to the decrease in performance parameters caused by defects originated due to various causes. During the fabrication process of solar cells, degradation is generally related to the processes such as passivation or firing. There exist sources of many types of degradation; however, the exact cause of Light and elevated Temperature Induced Degradation (LeTID) is yet to be determined. It is reported that the degradation and the regeneration occur due to the recombination of hydrogen and an arbitrary substance. In this paper, we report the deposition of Al₂O₃ and SiN_X on silicon wafers used in the Passivated Emitter and Rear Contact (PERC) solar structure and its degradation pattern. A higher degradation rate was observed in the sample with single layer of Al₂O₃ only, which indicates that the degradation is affected by the presence or the absence of a passivation thin film. In order to alleviate the degradation, optimization of different steps should be carried out in consideration of degradation in the solar cell fabrication process.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.189-194
• /
• 2024

This paper presents a radiation-hardened-by-design preamplifier that utilizes a self-compensation technique with a charge-sensitive amplifier (CSA) and replica for total ionizing dose (TID) effects. The CSA consists of an operational amplifier (OPAMP) with a 6-bit binary weighted current source (BWCS) and feedback network. The replica circuit is utilized to compensate for the TID effects of the CSA. Two comparators can detect the operating point of the replica OPAMP and generate appropriate signals to control the switches of the BWCS. The proposed preamplifier was fabricated using a general-purpose complementary metal-oxide-silicon field effect transistor 0.18 ㎛ process and verified through a test up to 230 kGy (SiO₂) at a rate of 10.46 kGy (SiO₂)/h. The code of the BWCS control circuit varied with the total radiation dose. During the verification test, the initial value of the digital code was 39, and a final value of 30 was observed. Furthermore, the preamplifier output exhibited a maximum variation error of 2.39%, while the maximum rise-time error was 1.96%. A minimum signal-to-noise ratio of 49.64 dB was measured.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권1호
• /
• pp.595-598
• /
• 2013

Background: Lung cancer is the leading cause of cancer death worldwide Therefore, identification of genetic as well as environmental factors is very important in developing novel methods of lung cancer prevention. However, this is a multi-layered problem. Therefore a lung cancer risk prediction system is here proposed which is easy, cost effective and time saving. Materials and Methods: Initially 400 cancer and non-cancer patients' data were collected from different diagnostic centres, pre-processed and clustered using a K-means clustering algorithm for identifying relevant and non-relevant data. Next significant frequent patterns are discovered using AprioriTid and a decision tree algorithm. Results: Finally using the significant pattern prediction tools for a lung cancer prediction system were developed. This lung cancer risk prediction system should prove helpful in detection of a person's predisposition for lung cancer. Conclusions: Most of people of Bangladesh do not even know they have lung cancer and the majority of cases are diagnosed at late stages when cure is impossible. Therefore early prediction of lung cancer should play a pivotal role in the diagnosis process and for an effective preventive strategy.

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.49-55
• /
• 2012

전역 클럭 없이 외부 입력에 따라서 값이 변하는 비동기 카운터는 우주용 메모리 등 현대 디지털 시스템에서 널리 사용된다. 본 논문에서는 우주 방사능 누적에 기인하는 크리티컬 레이스 고장이 존재하는 비동기 카운터를 위한 고장 극복 기법을 제안한다. 크리티컬 레이스는 비동기 디지털 회로 설계 과정에서 발생하는 대표적인 고장으로서 회로의 다음 안정 상태가 고정되지 않고 여러 값 중 하나로 나오는 비결정적인 특성을 보인다. 이번 연구에서는 비동기 순차 머신에 대한 교정 제어 기법을 이용하여 크리티컬 레이스를 극복할 수 있는 상태 피드백 제어기의 설계 과정을 제시한다. 또한 비동기 카운터 교정 제어 시스템을 VHDL 코드로 구현하고 실험을 통하여 제안된 제어 시스템이 크리티컬 레이스 고장을 극복하는 과정을 예시한다.

• 한국통신학회논문지
• /
• 제41권6호
• /
• pp.652-662
• /
• 2016

본 논문은 IP 기반의 통합 네트워크 환경에서 사용자가 단말을 변경해가며 서비스를 이용하고자 하는 경우에 끊김없는 서비스 이용이 가능한 사용자 이동성 관리 방안을 제안한다. 기존 이동성 기술들과 현재 진행 중인 대부분의 이동성 관련 연구들은 단말 이동성 지원에 집중되어 있어 다양한 유형의 이동성을 지원하기에 한계가 있다. 제안방안은 사용자 고유의 식별자인 UID(User Identifier)와 사용자가 이용하는 단말 고유의 식별자인 TID(Terminal Identifier) 간 매핑 관계와 사용자 고유의 영구적인 3계층 주소를 이용한 패킷 구성으로 사용자가 서비스 이용 중에 단말을 변경하더라도 세션이 유지될 수 있도록 한다. 제안방안에 의한 성능 향상을 검증하기 위해 수식을 이용하여 기존 사용자 이동성 방안과 제안방안의 핸드오버 시그널링 비용을 분석하고 비교하였다. 그 결과 제안방안이 기존방안 보다 더 나은 성능을 보임을 확인하였다.