• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.145-146
• /
• 1993

• 한국재료학회지
• /
• 제30권11호
• /
• pp.615-620
• /
• 2020

Oxide semiconductor, represented by a-IGZO, has been commercialized in the market as active layer of TFTs of display backplanes due to its various advantages over a-Si. a-IGZO can be deposited at room temperature by RF magnetron sputtering process; however, additional thermal annealing above 300℃ is required to obtain good semiconducting properties and stability. These temperature are too high for common flexible substrates like PET, PEN, and PI. In this work, effects of microwave annealing time on IGZO thin film and associated thin-film transistors are demonstrated. As the microwave annealing time increases, the electrical properties of a-IGZO TFT improve to a degree similar to that during thermal annealing. Optimal microwave annealed IGZO TFT exhibits mobility, SS, V_th, and V_H of 6.45 ㎠/Vs, 0.17 V/dec, 1.53 V, and 0.47 V, respectively. PBS and NBS stability tests confirm that microwave annealing can effectively improve the interface between the dielectric and the active layer.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.56-63
• /
• 2023

본 연구에서는 졸-겔 IGZO(Indium-Gallium-Zinc Oxide) 박막을 만들고 이에 전자빔을 조사 한 후 박막 트랜지스터로 제작하여 전자빔 조사가 박막 트랜지스터의 전기적 특성에 미치는 영향을 비교 분석하였다. 특히 전자빔이 조사되는 환경을 대기 중과 질소 분위기(<200 ppm O₂)로 두고 전자빔 조사 선량 세기를 100kGy와 200kGy로 각각 조사한 후 350℃ 온도에서의 열처리만 진행한 비교군과 비교 분석을 진행하였다. 전자빔 조사에 따른 졸-겔 IGZO 박막의 물성 변화를 분석하기 위해 UV-Visible spectroscopy, X-ray diffraction(XRD)와 X-ray photoelectron spectroscopy(XPS)를 분석 결과, 전자빔 조사 전·후의 모든 조건 하에서 가시광 영역에서의 80% 이상의 높은 투과도를 보여줌을 확인할 수 있었고, XRD 분석 결과를 통해 전자빔 조사와 관계없이 비정질 특성을 유지함을 확인하였다. 특히 전자빔 조사에 따라 졸-겔 IGZO 박막에 화학적 조성 변화가 있음을 확인하였는데, 질소 분위기에서 전자빔을 조사하게 되면 M-O결합과 관련된 peak이 차지하는 비율이 높아짐을 확인할 수 있었다. 질소 분위기에서 전자빔이 조사된 TFT들은 on/off 비율, 전자 이동도에서 향상된 특성을 보여주었으며, 시간에 따라 트랜지스터의 특성들(on/off 비율, 문턱전압, 전자이동도, 하위임계값 스윙)의 수치 또한 큰 변화 없이 유지됨이 확인되어, 졸-겔 공정 TFT 제작에 있어서 질소 분위기에서의 전자빔 조사공정이 IGZO기반 박막 트랜지스터의 전기적특성의 개선에 기여할 수 있을 것으로 기대된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1075-1078
• /
• 2007

Negative Bias Temperature Instability (NBTI) in Eximer Laser Annealing (ELA) based Low Temperature polysilicon (LTPS) Thin-Film Transistors (TFT) was investigated. Even though NBTI is generally appeared in devices with thin gate oxide, the TFT with gate oxide thickness of 120 nm, relatively thick, also showed NBTI effect and dynamic NBTI effect is dependent on operational frequency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1185-1188
• /
• 2006

Pentacene thin film transistors (OTFTs) on flexible polyimide substrate using electroplated gate electrode and organic/high-k inorganic bilayer gate dielectric layer. Incorporation of thin atomic-layer deposited $HfO_2$ layer on the PVP organic gate dielectric layer reduced the gate leakage and as a result enhanced the current on/off ratio.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.373-379
• /
• 2013

Mg-doped zinc tin oxide (ZTO:Mg) thin films were prepared on glasses by rf magnetron sputtering. $O_2$ was introduced into the chamber during the sputtering. The optical properties of the films as a function of oxygen flow rate were studied. The crystal structure, elementary properties, and depth profiles of the films were investigated by X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and secondary ion mass spectrometry (SIMS), respectively. Bottom-gate transparent thin film transistors were fabricated on $N^+$ Si wafers, and the variation of mobility, threshold voltage etc. with the oxygen flow rate were observed.

• 센서학회지
• /
• 제16권4호
• /
• pp.313-318
• /
• 2007

Single-wall carbon nanotube field-effect transistors (SWCNT FETs) of top gate structure were fabricated in a conventional metal-oxide-semiconductor field effect transistor (MOSFET) with gate electrodes above the conduction channel separated from the channel by a thin $SiO_{2}$ layer. The carbon nanotubes (CNTs) directly grown using thin Fe film as catalyst by thermal chemical vapor deposition (CVD). These top gate devices exhibit good electrical characteristics, including steep subthreshold slope and high conductance at low gate voltages. Our experiments show that CNTFETs may be competitive with Si MOSFET for future nanoelectronic applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.114-114
• /
• 2011

We report a high-performance and air-stable flexible and invisible semiconductor which can be substitute for the n-type organic semiconductors. N-type organic-inorganic nanohybrid superlattices were developed for active semiconducting channel layers of thin film transistors at low temperature of $150^{\circ}C$ by using molecular layer deposition with atomic layer deposition. In these nanohybrid superlattices, self-assembled organic layers (SAOLs) offer structural flexibility, whereas ZnO inorganic layers provide the potential for semiconducting properties, and thermal and mechanical stability. The prepared SAOLs-ZnO nanohybrid thin films exhibited good flexibility, transparent in the visible range, and excellent field effect mobility (> 7cm2/$V{\cdot}s$) under low voltage operation (from -1 to 3V). The nanohybrid semiconductor is also compatible with pentacene in p-n junction diodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1044-1045
• /
• 2004

In this work, the characteristics of organic thin film transistors (OTFTs) with self-assembled monolayers (SAMs) on polymeric gate insulator have been investigated. The SAMs were formed using atomic layer deposition (ALD) method onto gate insulator. Upon the investigations, it was observed that SAMs modify the wettability of polymeric insulator and influence the growth of subsequent organic semiconductor, and thereby, electric conductivity and roughness of the pentacene film are improved.

• Journal of Information Display
• /
• 제12권4호
• /
• pp.199-203
• /
• 2011

Reported herein is the film morphology control of inkjet-printed 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene) organic thin-film transistors for the improvement of their performance and of the device-to-device uniformity. The morphology of the inkjetted TIPS-pentacene films was significantly influenced by the bank geometry such as the bank shapes and confinement area for the channel region. A specific confinement size led to the formation of uniform TIPS-pentacene channel layers and better electrical properties, which suggests that the ink volume and the solid concentration of the organic-semiconductor solutions should be considered in designing the bank geometry.