• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1233-1238
• /
• 1998

Transglycosylation reactions among methyl 2,3,4,6-tetra-O-methyl-D-glycopyranosides and isomeric butyl alcohols or cyclohexanol took place in the presence of trimethylsilyl trifluoromethanesulfonate (TMSOTf) in dichloromethane. The extent of the reaction after 1 h and 24 h from mixing was determined by gas chromatography (GC). Anomerization of the substrate took place during the course of transglycosylation, which favors α anomer regardless of the anomeric configurations of the starting glycosides. Transglycosylation also favors the a anomer regardless of the steric bulkiness of the alcohol. tert-Butyl alcohol did not give any transglycosylation, suggesting the steric hindrance of approaching the bulky alcohol to the oxonium intermediate. A mechanism for the transglycosylation have been proposed.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1303-1308
• /
• 1999

Conducting poly(3,4-ethylenedioxythiophene) (PEDT) films with metalloporphyrins incorporated as the counter ions were prepared by electropolymerization of the monomer in the presence of metal-tetra(sulfonatophenyl) porphyrin anions. Cathodic reduction of oxygen on the resulting conducting polymer films was studied. The overpotential for O2 reduction on electrodes with cobalt-porphyrin complex was significantly smaller in acidic solutions than on gold. In basic solutions, the overpotential at low current densities was close to those on platinum and gold. Polymer electrode with Co-complex yielded higher limiting currents than with Fe-complex, although the Co-complex polymer electrode was a poorer electrocatalyst for O2 reduction in the activation range of potential than the Fe counterpart. From the rotating ring-disk electrode experiments, oxygen reduction was shown to proceed through either a 4-electron pathway or a 2-electron pathway. In contrast to the polypyr-role-based electrodes, the PEDT-based metalloporphyrin electrodes were stable with wider potential windows, including the oxygen reduction potential. Their electrocatalytic properties were maintained at temperatures up to 80℃ in KOH solutions.

• Advances in materials Research
• /
• v.2 no.2
• /
• pp.99-109
• /
• 2013

In the present investigation, nanocomposite films with poly(methyl methacrylate) (PMMA) as a polymer matrix and barium titanate as a filler were prepared by solution casting method. Barium titanate nano particles were prepared using Ti(IV) triethanolaminato isopropoxide and hydrated barium hydroxide as precursors and tetra methyl ammonium hydroxide (TMAH) as a base. The nanocomposite films were characterized using XRD, FTIR, SEM and dielectric spectroscopy techniques. Dielectric measurements were performed in the frequency range 100 Hz-10 MHz. Dielectric constant of nanocomposites were found to depend on the frequency, the temperature and the filler fraction. Dissipation factors were also influenced by the frequency and the temperature but not much influenced by the filler fractions. The 10 wt% of BT-PMMA nanocomposite had the lowest dielectric constant of 3.58 and dielectric loss tangent of 0.024 at 1MHz and $25^{\circ}C$. The dielectric mixing model of Modified Lichtenecker showed the close fit to the experimental data.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.99-105
• /
• 2017

This paper confirms the similarity of temperature tendency through numerical analysis and comparison with test, and it also confirms that temperature prediction of LED lightings is possible by numerical analysis. We confirmed that the temperature difference is about $10{\sim}20^{\circ}C$ except for some measurement points and shows similar tendency with the interpretation through manufacturing and performance analysis of AL heat sink applied Circular LED street lights and manufacturing and performance analysis of CMP-PLA heat sink applied Circular LED street lights. The simulations use Octree technique in SC/Tetra to set the grid size df the surface.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.3
• /
• pp.294-301
• /
• 2019

The quasi-solid-state hybrid electrolytes were synthesized by chemical cross-linking reaction of methacrylate-functionalized $SiO_2$ ($MA-SiO_2$) and tetra (ethylene glycol) diacrylate in aqueous electrolyte. A quasi-solid-state electrolyte synthesized by 6 wt.% $MA-SiO_2$ exhibited a high ionic conductivity of $177mS\;cm^{-1}$ at room temperature. The electrochemical $H_2$ sensor assembled with quasi-solid-state electrolyte showed relatively fast response and high sensitivity for hydrogen gas at ambient temperature, and exhibited better durability and stability than the liquid electrolyte-based sensor. The simple construction of the sensor and its sensing characteristics make the quasi-solid-state hydrogen sensor promising for practical application.

• Journal of Sensor Science and Technology
• /
• v.30 no.1
• /
• pp.10-14
• /
• 2021

Wet etching is more economical than dry etching and provides a uniform etching depth regardless of wafer sizes. Typically, potassium hydroxide (KOH) and tetra-methyl-ammonium hydroxide (TMAH) solutions are widely used for the wet etching of silicon. However, there is a limit to the wet etching process when a material deposited on an unetched surface reacts with an etching solution. To solve this problem, in this study, an apparatus was designed and manufactured to physically block the inflow of etchants on the surface using a rubber O-ring. The proposed apparatus includes a heater and a temperature controller to maintain a constant temperature during etching, and the hydrostatic pressure of the etchant is considered for the thin film structure. A corrugation membrane with a diameter of 800 ㎛, thickness of 600 nm, and corrugation depth of 3 ㎛ with two corrugations was successfully fabricated using the prepared device.

• Journal of the Korean Chemical Society
• /
• v.67 no.3
• /
• pp.175-180
• /
• 2023

Tetra-aryl substituted A4-type porphyrins (TP, TD, TA) and trans-A2B2 porphyrins (DDP1, AAP1) with electron-donating or withdrawing groups were synthesized. The band gap energy of those porphyrins was calculated from their UV-Vis spectra and CV data. With an electron-withdrawing group, the band gap energy of porphyrin TA increased via the LUMO energy up. Meanwhile, the introduction of an electron-donating group decreased the band gap of porphyrin by HOMO level up as as in the case of porphyrin TD. The band gap (2.19-2.28 eV) of metalloporphyrin PP-Ni was greater than those (1.81-2.06 eV) of non-metalloporphyrins PP due to the LUMO level up.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1397-1400
• /
• 2008

본 논문에서는 디지털 TRS 시스템(TETRA)의 종단간 암호화에 사용되는 스마트카드의 성능 요구조건을 만족하는 상용 암호 알고리즘의 구현 가능성에 대하여 2가지 스마트카드에서 다룬다. 삼성전자의 16비트와 32비트 프로세서를 탑재한 스마트카드에서 각 알고리즘의 동작시간을 측정하였다. 성능 비교에 사용된 알고리즘들은 AES, ARIA, 3DES, SEED이다. 32비트 스마트카드에서는 알고리즘의 동작시간이 1.5ms에서 2.3ms사이에 존재하는 반면, 16비트 스마트카드에서는 2.8ms에서 8.2ms사이의 큰 차이로 존재한다. 단말기와 스마트카드의 통신 속도, 프로세서 계산 능력 등을 고려하여 상용스마트카드의 채택 가능한 칩과 알고리즘의 선정에 본 실험 결과는 참고자료가 될 수 있다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.12 no.1
• /
• pp.63-73
• /
• 2006

The first packaging of Korean market milk dates back to July 1937 when Seoul Dairy Co-operative (Kyung Seong Dairy Co-operative in those days) used 1 hob (180 ml) glass bottles with either paper caps or cork caps. During 1945-1972, 2 hob (360 ml) glass bottles were produced, and iron caps and egret-shaped plastic film replaced the previously used caps. When there were insufficient numbers of milk bottles, other glass bottles such as soda drink bottles and beer bottles were used instead. Seoul Dairy Co-operative was the only dairy company existing in Korea until Nam Yang Dairy Co. Ltd was founded in March 1964, followed by Hae Tae Dairy Co. Ltd(Tae Han Food Public Corporation in those days) in 1969 and Mae-il Dairy Co. Ltd (Korea Dairy Company in those days) in May 1971. As many other dairy companies along with the above-mentioned companies were established, a variety of dairy products were packaged and marketed. In 1971 Seoul Dairy Co-operative first used triangular-shaped polyethylene film wrappers, and in 1972 Nam Yang Diary was the first company importing sterilized Tetra pak for the packaging of milk. Since 1974 rectangular shaped polyethylene film wrappers and plastic bottles were used. In 1977 the gable top carton pack made of paper was first introduced by Seo Joo Industry Co. Ltd, and its market share increased rapidly with gradual increase in its volume, from 180ml to 200ml, to 250ml, to 500ml and finally to 1,000ml, causing change in the volume of milk consumption. And in Sep. 1987 Pasteur market milk Co. Ltd. first used round type high density polyethylene bottle(body) with low density polyethylene cap of 245g, 490g and 980g volumes respectively.

• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.766-772
• /
• 2011

This study was conducted to evaluate the daily intakes of propyl gallate, EDTA (ethylenediamine tetra acetate), and erythorbic acid for average consumers by age group and the intake of high consumers ($95^{th}$ percentile) in Korea. The average intake of EDTA was $1.14{\mu}g/kg{\cdot}bw/day$, and 0.0% of the ADI (acceptable daily intake) established by JECFA (Joint FAO/WHO Expert Committee on Food Additives). The $95^{th}$ percentile intake of EDTA was $141.24{\mu}g/kg{\cdot}bw/day$ (5.6% of ADI). The average intake of erythorbic acid was $16.93{\mu}g/kg{\cdot}bw/day$, and the 3-6 year-old group had the highest consumption ($58.43{\mu}g/kg{\cdot}bw/day$), which was <1.0% of the ADI established by the EU (European Union). The $95^{th}$ percentile intake of erythorbic acid was $1,320.31{\mu}g/kg{\cdot}bw/day$ and 22.0% of the ADI. In conclusion, daily intakes of propyl gallate, EDTA, and erythorbic acid in Korea were at safe levels in all age groups and also in high consumers.