DOI QR코드

DOI QR Code

Development of apparatus for Single-sided Wet Etching and its applications in Corrugated Membrane Fabrication

  • Kim, Junsoo (Department of Mechanical Engineering, Pohang University of Science and Technology) ;
  • Moon, Wonkyu (Department of Mechanical Engineering, Pohang University of Science and Technology)
  • Received : 2020.11.30
  • Accepted : 2021.01.27
  • Published : 2021.01.31

Abstract

Wet etching is more economical than dry etching and provides a uniform etching depth regardless of wafer sizes. Typically, potassium hydroxide (KOH) and tetra-methyl-ammonium hydroxide (TMAH) solutions are widely used for the wet etching of silicon. However, there is a limit to the wet etching process when a material deposited on an unetched surface reacts with an etching solution. To solve this problem, in this study, an apparatus was designed and manufactured to physically block the inflow of etchants on the surface using a rubber O-ring. The proposed apparatus includes a heater and a temperature controller to maintain a constant temperature during etching, and the hydrostatic pressure of the etchant is considered for the thin film structure. A corrugation membrane with a diameter of 800 ㎛, thickness of 600 nm, and corrugation depth of 3 ㎛ with two corrugations was successfully fabricated using the prepared device.

Keywords

References

  1. D. T. Martin, J. Liu, K. Kadirvel, R. M. Fox, M. Sheplak, and T. Nishida, "A micromachined dual-backplate capacitive microphone for aeroacoustic measurements", J Microelectromech. Syst., Vol. 16, No. 6, pp. 1289-1302, 2007. https://doi.org/10.1109/JMEMS.2007.909234
  2. A. Ravi Sankar and S. Das, "A very-low cross-axis sensitivity piezoresistive accelerometer with an electroplated gold layer atop a thickness reduced proof mass", Sens. Actuators A, Vol. 189, pp. 125-133, 2013. https://doi.org/10.1016/j.sna.2012.09.025
  3. H. Nazemi, A. Joseph, J. Park, and A. Emadi, "Advanced Micro- and Nano-Gas Sensor Technology: A Review", Sensors, Vol. 19, No. 6, pp. 1285(1)-1285(23), 2019. https://doi.org/10.3390/s19061285
  4. S. Saadon and O. Sidek, "A review of vibration-based MEMS piezoelectric energy harvesters", Energy Convers. Manag., Vol. 52, No. 1, pp. 500-504, 2011. https://doi.org/10.1016/j.enconman.2010.07.024
  5. M. Pedersen, W. Olthuis, and P. Bergveld, "A silicon condenser microphone with polyimide diaphragm and backplate", Sens. Actuators A, Vol. 63, No. 2, pp. 97-104, 1997. https://doi.org/10.1016/S0924-4247(97)01532-X
  6. K. Oda, H. Takao, K. Terao, T. Suzuki, F. Shimokawa, I. Ishimaru, and F. Oohira, "Vertical comb-drive MEMS mirror with sensing function for phase-shift device", Sens. Actuators A, Vol. 181, pp. 61-69, 2012. https://doi.org/10.1016/j.sna.2012.04.007
  7. S. D. Senturia, Microsystem design, Kluwer Academic Publishers, New York, Boston, Dordrecht, London, Moscow, pp. 67-71, 2002.
  8. Y. B. Gianchandani, O. Tabata, and H. P. Zappe, Comprehensive microsystems, Elsevier B.V., Amsterdam, pp. 183-216, 2008.
  9. J. Laconte, D. Flandre, and J.-P. Raskin, Micromachined thin-film sensors for SOI-CMOS co-integration, Springer Science & Business Media, Dordrecht, pp. 17-45, 2006.
  10. K. R. Williams, K. Gupta, and M. Wasilik, "Etch rates for micromachining processing-part II", J Microelectromech. Syst., Vol. 12, No. 6, pp. 761-778, 2003. https://doi.org/10.1109/JMEMS.2003.820936
  11. D. Bodas, S. J. Patil, V. Krishnamurthy, and S. J. J. o. t. I. I. o. S. Gangal, "PMMA as an etch mask for silicon micromachining a feasibility study", J Indian Inst. Sci., Vol. 81, No. 6, pp. 645-651, 2013.
  12. J. T. Kung, A. N. Karanicolas, and H.-S. Lee, "A compact, inexpensive apparatus for one-sided etching in KOH and HF", Sens. Actuators A, Vol. 29, No. 3, pp. 209-215, 1991. https://doi.org/10.1016/0924-4247(91)80017-J
  13. J. Brugger, G. Beljakovic, M. Despont, H. Biebuyck, N. F. de Rooij, and P. Vettiger, "High-yield wafer chuck for single-sided wet etching of MEMS structures", Proc. Int. Solid State Sens. Actuators Conf. (Transducers '97), pp. 711-713, Chicago, USA, 1997.
  14. N. Kummer, J. Marek, M. Willmann, and G. Findler, "Device for one-sided etching of a semiconductor wafer", U.S. Patent No. 5,324,410. 28 Jun. 1994.
  15. K. Sooriakumar, S. A. Switzer, K. E. Stegall, T. J. Dunlap, and C. M. Albrecht, "Substrate holder and method of use", U.S. Patent No. 5,578,167. 26 Nov. 1996.
  16. A. Dehe, M. Wurzer, M. Fuldner, and U. Krumbein, "A4. 3-The infineon silicon MEMS microphone", Proc. Sens. 2013, pp. 95-99, Germany, 2013.
  17. G. S. J. J. o. C. Kell and E. Data, "Density, thermal expansivity, and compressibility of liquid water from 0. deg. to 150. Deg: Correlations and tables for atmospheric pressure and saturation reviewed and expressed on 1968 temperature scale", J. Chem. Eng. Data, Vol. 20, No. 1, pp. 97-105, 1975. https://doi.org/10.1021/je60064a005