• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.05a
• /
• pp.86-90
• /
• 1992

We have studied the characteristics of n-and p-channel FETs with submicron channel length fabricated by twin-well process. Threshold voltage variation and potential distribution with channel ion implantation conditions and impurity profile of n-and p-channel region wee simulated using SUPREM-II and MINIMOS 4.0 simulater, P-channel FET had buried-channel in the depth of 0.15 $\mu\textrm{m}$ from surface by counter-doped boron ion implantation for threshold voltage adjustment. As a result of device measurement, we have obtained good drain saturation characteristics for 3.3 [V] opreation, minimized short channel effect with threshold voltage shift below 0.2[V], high punchthrough and breakdown voltage above 10[V] and low subthreshold value.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.939-942
• /
• 2007

We investigated the characteristics of UTB-SOI pMOSFETs with SOI thickness($T_{SOI}$) ranging from 10 nm to 1 nm and evaluated the dependence of electrical characteristics on the silicon surface orientation. As a result, it is found that the subthreshold characteristics of (100)-surface UTB-SOI pMOSFETs were superior to (110)-surface. However, the hole mobility of (110)-surface were larger than that of (100)-surface. Especially, the enhancement of effective hole mobility at the effective field of 0.1 MV/cm was observed from 3-nm to 5-nm SOI thickness range.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1477-1478
• /
• 2011

Solution processed zinc tin oxide (ZTO) thin films were studied using a spin coating for the fabrication of thin film transistors and simple circuits. The solution processed thin film transistors (W/L = 100/10 ${\mu}m$) have the average saturation mobility of 1.9 $cm^2$/Vs, threshold voltage of 20 V, and subthreshold slope of 0.5 V/decade. The dc characteristics of an inverter with $W_{load}=100\;{\mu}m$ and $W_{drive}=10\;{\mu}m$, measured under votage supply of $V_{DD}$ = +50 V. The inverter beta ratio is 20 ($R=(W_{drived}/L_{drive})/(W_{load}/L_{load})=20$) and $gain_{max}$ is 2. The characteristics of an oscillator were measured under voltage supply of $V_{DD}$ = +60 V.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.72-80
• /
• 1993

We fabricated 0.3um gate length inverse-T gate MOS(ITMOS) and conventional lightly doped drain oxide spacer MOS(LDDMOS), and studied electrical characteristics for comparison. Threshold voltage of 0.3um gate length device was 0.58 V for ITMOS and 0.6V for LDDMOS. Measured subthreshold characteristics showed a slope of 85mV/decades for both ITLDD and LDDMOS. Maximum transconductance at V S1ds T=V S1gs T=3.3V was 180mS/mm for ITMOS and 163mS/mm for LDDMOS respectively. GIDL current was observed to be 0.1pA/um for ITOMS and 0.8pA/um for LDDMOS. Substrate current of ITMOS as a function of drain current was found to be reduced by a foactor of 2.5 compared with that of LDDMOS.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.695-698
• /
• 2008

We investigated the characteristics of Strained-Si-on-Insulator (sSOI) MOSFETs with 0.7% tensile strain. The sSOI MOSFETs have superior subthreshold swing under 70 mV/dec and output current. Especially, the electron and hole were increased in sSOI MOSFET. The electron and hole mobility in sSOI MOSFET were 286$cm^2/Vs$ and 151$cm^2/Vs$, respectively. The carrier mobility enhancement is due to the subband splitting by 0.7% tensile strain.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.112-120
• /
• 1996

With the MOsES (mask oxide sidewall etch scheme)process which uses the conventional i-line stepper and isotropic wet etching, CMOSFET's with fine gate pattern of 0.1.mu.m CMOSFET device, the screening oxide is deposited before the low energy ion implantation for source/drain extensions and two step sidewall scheme is adopted. Through the characterization of 0.1.mu.m CMOSFET device, it is found that the screening oxide deposition sheme has larger capability of suppressing the short channel effects than two step sidewall schem. In cse of 200.angs.-thick screening oxide deposition, both NMOSFET and PMOSFET maintain good subthreshold characteristics down to 0.1.mu.m effective channel lengths, and show affordable drain saturation current reduction and low impact ionization rates.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.958-961
• /
• 2007

The electrical characteristics of organic thin-filmtransistor (OTFTs) can be improved by inserting adhesion layer on gate dielectrics. Adhesion layer was used as polymeric adhesion layer deposited on inorganic gate insulators such as silicon dioxide $(SiO_2)$ and it was formed by vapor deposition polymerization (VDP) instead of spin-coating process. The OTFTs obtained the on/off ratio $of{\sim}10^4$, threshold voltage of 1.8V, subthreshold slop of 2.9 V/decade and field effect mobility about $0.01\;cm^2/Vs$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.73-74
• /
• 2007

We fabricated strained-SOI(sSOI) n-/p-MOSFETs and investigated the electron/hole mobility characteristics. The subthreshold characteristics of sSOI MOSFETs were similar to those of conventional SOI MOSFET. However, The electron mobility of sSOI nMOSFETs was larger than that of the conventional SOI nMOSFETs. These mobility enhancement effects are attributed to the subband modulation of silicon conduction band.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.172-178
• /
• 2016

In this paper, we propose a sub-10 nm Ge/GaAs heterojunction-based tunneling field-effect transistor (TFET) with vertical band-to-band tunneling (BBT) operation for ultra-low-power (LP) applications. We design a stack structure that is based on the Ge/GaAs heterojunction to realize the vertical BBT operation. The use of vertical BBT operations in devices results in excellent subthreshold characteristics with a reduction in the drain-induced barrier thinning (DIBT) phenomenon. The proposed device with a channel length ($L_{ch}$) of 5 nm exhibits outstanding LP performance with a subthreshold swing (S) of 29.1 mV/dec and an off-state current ($I_{off}$) of $1.12{\times}10^{-11}A/{\mu}m$. In addition, the use of the highk spacer dielectric $HfO_2$ improves the on-state current ($I_{on}$) with an intrinsic delay time (${\tau}$) because of a higher fringing field. We demonstrate a sub-10 nm LP switching device that realizes a good S and lower $I_{off}$ at a lower supply voltage ($V_{DD}$) of 0.2 V.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.33-37
• /
• 2014

We have developed a novel passivation process employing a sacrificial gallium oxide process in order to recover the surface damage in AlGaN/GaN HFETs. Even with a conventional prepassivation process, surface damage during high temperature ohmic annealing cannot be avoided completely. Therefore, it is necessary to recover the damaged surface to avoid the characteristic degradation. In this work, a sacrificial gallium oxide process has been proposed in which the damaged surface after ohmic annealing was oxidized by oxygen plasma treatment and thereafter etched back using HCl. As a result, the leakage current was dramatically reduced and thus the subthreshold slope was significantly improved. In addition, the maximum drain current level was increased from 594 to 634 mA/mm. To verify the effects, the surface conditions were carefully investigated using X-ray photoelectron spectroscopy.