• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.379-383
• /
• 2003

The subthreshold characteristics of Double-Gate MOSFETs are analyzed for various Tsi. In the lightly-doped asymmetric device, it is found that the subthreshold current dramatically increases as the Tsi increases and this phenomenon is due to the linear distribution of potential in the channel region with low depletion-charge. Further, we derived an analytical equation which can explain this phenomenon and verified the accuracy of analytical equation by comparing with the result of device simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.105-106
• /
• 2005

The impact ionization MOS (I-MOS) transistor with 50nm channel length is presented by using 2-D device simulator ISE-TCAD. The subthreshold slope cannot be steeper than kT/q since the subthreshold conduction is due to diffusion current. As MOSFETs are scaled down, this problem becomes significant and the subthreshold slope degrades which leads an increase in the off-current and off-state power dissipation. The I-MOS is based on a gated p-i-n structure and the subthreshold conduction is induced by impact ionization. The simulation results show that the subthreshold slope is 11.7 mV/dec and this indicates the I-MOS improves the switching speed and off-state characteristics.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.733-737
• /
• 2011

This paper has studied subthreshold characteristics for double gate(DG) MOSFET using Gaussian function in solving Poisson's equation. Typical two dimensional analytical transport models have been presented for symmetrical Double Gate MOSFETs (DGMOSFETs). Subthreshold swing and threshold voltage are very important factors for digital devices because of determination of ON and OFF. In general, subthreshold swings have to be under 100mV/dec, and threshold voltage roll-off small in short channel devices. These models are used to obtain the change of subthreshold swings and threshold voltage for DGMOSFET according to channel doping profiles. Also subthreshold swings and threshold voltages have been analyzed for device parameters such as channel length, channel thickness and channel doping profiles.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.708-714
• /
• 1995

We have discussed the buried-channel(BC) behavior through the subthreshold characteristics of submicron PMOSFET device fabricated with twin well CMOS process. In this paper, we have guessed the initial conditions of ion implantation using process simulation, obtained the subthreshold characteristics as a function of process parameter variation such as threshold adjusting ion implant dose($D_c$), channel length(L), gate oxide thickness($T_ox$) and junction depth of source/drain($X_j$) using device simulation. The buried channel behavior with these process prarameter variation were showed apparent difference. Also, the fabricated pMOSFET device having different channel length represented good S.S value and low leakage current with increasing drain voltage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.107-117
• /
• 2010

An analytical subthreshold swing model is presented for symmetric double-gate (DG) MOSFETs with Gaussian doping profile in vertical direction. The model is based on the effective conduction path effect (ECPE) concept of uniformly doped symmetric DG MOSFETs. The effect of channel doping on the subthreshold swing characteristics for non-uniformly doped device has been investigated. The model also includes the effect of various device parameters on the subthreshold swing characteristics of DG MOSFETs. The proposed model has been validated by comparing the analytical results with numerical simulation data obtained by using the commercially available $ATLAS^{TM}$ device simulator. The model is believed to provide a better physical insight and understanding of DG MOSFET devices operating in the subthreshold regime.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.737-739
• /
• 2010

In this paper, the subthreshold characteristics have been alanyzed using MicroTec4.0 for double gate MOSFET(DGMOSFET). The technology for characteristic analysis of device for high integration is changing rapidly. Therefore to understand characteristics of high-integrated device by computer simulation and fabricate the device having such characteristics became one of very important subjects. The oxide thickness and channel thickness in DG MOSFET determines threshold voltage and extensively influences on Ss(Subthreshold swing). We have investigated the threshold voltage and Ss(Subthreshold swing) characteristics according to variation of channel thickness from 1nm to 3nm in this study.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.449-452
• /
• 2010

We have analyzed channel doping and dimensions(channel length, width and thickness) for the optimum subthreshold characteristics of DG(Double Gate) MOSFET based on the model of MicroTec 4.0. Since the DGMOSFET is the candidate device to shrink short channel effects, the determination of design rule for DGMOSFET is very important to develop sub-100nm devices for high speed and low power consumption. As device size scaled down, the controllability of dimensions and oxide thickness is very low. We have analyzed the short channel effects for the variation of channel dimensions, and found the design conditions of DGMOSFET having the optimum subthreshold characteristics for digital applications.

• ETRI Journal
• /
• v.11 no.4
• /
• pp.98-104
• /
• 1989

Closed form solution of nonlinear 2-DEG concentration formula is proposed. This allows us to model continuous 2-DEG charge concentration as the function of gate voltage covering subthreshold region of the I-V curves. Comparisons of the Ids-Vgs characteristics and transconductance with the measured data were performed to show the accuracy of the proposed model. This way we have completely closed form I-V characteristics in subthreshold, triode and saturation region incorporating accurate charge control mechanism for HEMTs.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.18-20
• /
• 2002

In sub-l/4 ${\mu}{\textrm}{m}$ NMOSFET with STI (Shallow Trench Isolation), the anomalous hump phenomenon of subthreshold region, due to capped p-TEOS/SiN induced defect, is reported. The hump effect was significantly observed as channel length is reduced, which is completely different from previous reports. Channel boron dopant redistribution due to the defect should be considered to improve hump characteristics besides considerations of STI comer and recess. 130

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.583-586
• /
• 2011

In this paper, subthreshold swing characteristics have been presented for double-gate MOSFETs, using the analytical model based on series form of potential distribution. Subthreshold swing is very important factor for digital devices because of determination of ON and OFF. In general, subthreshold swings have to be under 100mV/dec. The channel length $L_g$ is varied from 30nm to 100nm, and channel thickness $t_{si}$ from 15 to 20nm according to channel length, and oxide thickness 5nm to investigate subthreshold swing. The doping of channel is fixed with $10^{16}cm^{-3}$ p-type. The results show good agreement with numerical simulations, confirming this model.