Kim, Jung-Hye;Son, Dae-Ho;Kim, Dae-Hwan;Kang, Jin-Kyu;Ha, Ki-Ryong
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.200-200
/
2010
In recent times, metal oxide semiconductors thin films transistor (TFT), such as zinc and indium based oxide TFTs, have attracted considerable attention because of their several advantageous electrical and optical properties. There are many deposition methods for fabrication of ZnO-based materials such as chemical vapor deposition, RF/DC sputtering and pulsed laser deposition. However, these vacuum process require expensive equipment and result in high manufacturing costs. Also, the methods is difficult to fabricate various multicomponent oxide semiconductor. Recently, several groups report solution processed metal oxide TFTs for low cost and non vacuum process. In this study, we have newly developed solution-processed TFTs based on Ti-related multi-component transparent oxide, i. e., InTiO as the active layer. We propose new multicomponent oxide, Titanium indium oxide(TiInO), to fabricate the high performance TFT through the sol-gel method. We investigated the influence of relative compositions of Ti on the electrical properties. Indium nitrate hydrate [$In(NO^3).xH_2O$] and Titanium isobutoxide [$C_{16}H_{36}O_4Ti$] were dissolved in acetylacetone. Then monoethanolamine (MEA) and acetic acid ($CH_3COOH$) were added to the solution. The molar concentration of indium was kept as 0.1 mol concentration and the amount of Ti was varied according to weighting percent (0, 5, 10%). The complex solutions become clear and homogeneous after stirring for 24 hours. Heavily boron (p+) doped Si wafer with 100nm thermally grown $SiO_2$ serve as the gate and gate dielectric of the TFT, respectively. TiInO thin films were deposited using the sol-gel solution by the spin-coating method. After coating, the films annealed in a tube furnace at $500^{\circ}C$ for 1hour under oxygen ambient. The 5% Ti-doped InO TFT had a field-effect mobility $1.15cm^2/V{\cdot}S$, a threshold voltage of 4.73 V, an on/off current ratio grater than $10^7$, and a subthreshold slop of 0.49 V/dec. The 10% Ti-doped InO TFT had a field-effect mobility $1.03\;cm^2/V{\cdot}S$, a threshold voltage of 1.87 V, an on/off current ration grater than $10^7$, and a subthreshold slop of 0.67 V/dec.
In this study, NASICON-type Li1+XGaXTi2-X(PO4)3 (x = 0.1, 0.3 and 0.4) solid-state electrolytes for all-solid-state batteries were synthesized through the sol-gel method. In addition, the influence on the ion conductivity of solid-state electrolytes when partially substituted for Ti4+ (0.61Å) site to Ga3+ (0.62Å) of trivalent cations was investigated. The obtained precursor was heat treated at 450 ℃, and a single crystalline phase of Li1+XGaXTi2-X(PO4)3 systems was obtained at a calcination temperature above 650 ℃. Additionally, the calcinated powders were pelletized and sintered at temperatures from 800 ℃ to 1,000 ℃ at 100 ℃ intervals. The synthesized powder and sintered bodies of Li1+XGaXTi2-X(PO4)3 were characterized using TG-DTA, XRD, XPS and FE-SEM. The ionic conduction properties as solid-state electrolytes were investigated by AC impedance. As a result, Li1+XGaXTi2-X(PO4)3 was successfully produced in all cases. However, a GaPO4 impurity was formed due to the high sintering temperatures and high Ga content. The crystallinity of Li1+XGaXTi2-X(PO4)3 increased with the sintering temperature as evidenced by FE-SEM observations, which demonstrated that the edges of the larger cube-shaped grains become sharper with increases in the sintering temperature. In samples with high sintering temperatures at 1,000 ℃ and high Ga content above 0.3, coarsening of grains occurred. This resulted in the formation of many grain boundaries, leading to low sinterability. These two factors, the impurity and grain boundary, have an enormous impact on the properties of Li1+XGaXTi2-X(PO4)3. The Li1.3Ga0.3Ti1.7(PO4)3 pellet sintered at 900 ℃ was denser than those sintered at other conditions, showing the highest total ion conductivity of 7.66 × 10-5 S/cm at room temperature. The total activation energy of Li-ion transport for the Li1.3Ga0.3Ti1.7(PO4)3 solid-state electrolyte was estimated to be as low as 0.36 eV. Although the Li1+XGaXTi2-X(PO4)3 sintered at 1,000 ℃ had a relatively high apparent density, it had less total ionic conductivity due to an increase in the grain-boundary resistance with coarse grains.
Journal of Physiology & Pathology in Korean Medicine
/
v.32
no.4
/
pp.255-260
/
2018
Chung-Sang (CS) is an experimental herbal remedy that is formulated to treat respiratory diseases implicated by inflammation. The herbs comprised of CS are frequently prescribed for treating various inflammatory symptoms: Menthae haplocalycis Herba, Magnoliae Flosis, Xanthii Fructus, Herba Asari, and Caryphylli Flos. Here, we prepared the extract of CS with boiling water (wCS) or with 50 % ethanol (eCS) and examined whether the two different extracts of CS exhibit a toxicity to cultured cells and mice. RAW 264.7 cells were treated with wCS or eCS, and the cytotoxicity of these extracts to RAW 264.7 cells was determined by an MTT assay. Although the production of intracellular reactive oxygen species that are detrimental to the cells was not increased by the extracts, the cytotoxicity to the cells was evident from 10 mg/ml of wCS and 100 mg/ml of eCS, suggesting that eCS is less cytotoxic. When mice (n = 10/group) received a single intratracheal wCS or eCS daily for 14 days, wCS yielded 40 % mortality, whereas eCS showed none. Both wCS and eCS did not significantly affect the weight of the body and of vital organs, except the lung. Biochemical analyses of mice blood indicated no damage to liver or kidney. However, unlike eCS, wCS significantly increased the level of IgE in serum. Collectively, our results show that eCS was less toxic than wCS, suggesting that CS prepared with 50 % ethanol is preferential over the conventional way of preparing CS.
Proceedings of the Korean Society of Developmental Biology Conference
/
2003.10a
/
pp.106-106
/
2003
Human papillomavirus type 16(HPV16) has been known to the major factor for the development of uterine cervical carcinomas. We have extended these studies to investigate the in vivo activities of HPV-16 E6/E7 when expressed in squamous epithelia of transgenic mice. Grossly, hK14HPV16E6/E7 transgenic mice had multiple phenotypes, including wrinkled skin that was apparent prior to the appearance of hair on neonates, thickened ears, and loss of hair in adults. In the transgenic mice, the wrinkled skin phenotype on the body and legs died at the age of 3-4 weeks. Histological analysis of demonstrated that E6/E7 causes epidermal hyperplasia in multiple transgenic lineages with high penetrance. This epithelial hyperplasia was characterized by an expansion of the proliferating compartment and an expansion of the keratinocyte and was associated with hyperkeratosis. These transgenic mice expressed E6/E7 transgene mainly in skin, heart, pancreas and kidney. Hyperplasia was found at the skin. The enzyme activities of GR, GPx and CuZnSOD were measured from the transgene cause keratinocyte at the skin. The specific enzyme activities were significantly higher in transgenic mice skin compared to the normal mice skin. Thus these transgenic mice may be useful for the develpment of antioxidant enzymes or other therapies for HPV-associated hyperkeratosis.
Depuis les $ann{\acute{e}}es$ 1990, sous l'influence de la $pens{\acute{e}}e$ postmoderne, des ${\oe}uvres$$d{\acute{e}}constructivistes$ ont fait leur apparition dans le $th{\acute{e}}{\hat{a}}tre$$cor{\acute{e}}en$. Cependant, cette approche est plus remarquable dans le domaine du $th{\acute{e}}{\hat{a}}tre$ pratique que dans celui de $l^{\prime}{\acute{e}}criture$ dramatique. Par exemple, ce mouvement a $commenc{\acute{e}}$ avec les metteurs en $sc{\grave{e}}ne$ OH Tae-suk et GUI Gook-seo au $d{\acute{e}}but$ des $ann{\acute{e}}es$ 1990. Leur ont $succ{\acute{e}}d{\acute{e}}$ ensuite les metteurs en $sc{\grave{e}}ne$ CHOI Yong-hoon, de la troupe de $th{\acute{e}}{\hat{a}}tre$ Chak Eun Shin Hwa, et PARK Kun-hyung. De plus, actuellement, de jeunes metteurs en $sc{\grave{e}}ne$ travaillent avec $perspicacit{\acute{e}}$, tels que KO Sung-woong, KANG Lyang-won et YOUN Han-sol. A $l^{\prime}oppos{\acute{e}}$ de ce $th{\acute{e}}{\hat{a}}tre$ pratique, $l^{\prime}{\acute{e}}criture$ dramatique des $pi{\grave{e}}ces$ de $th{\acute{e}}{\hat{a}}tre$ demeure au niveau de $l^{\prime}{\acute{e}}criture$$repr{\acute{e}}sentative$ et est encore sans grande valeur. Pour $r{\acute{e}}fl{\acute{e}}chir$${\grave{a}}$ ce $probl{\grave{e}}me$, nous $consid{\acute{e}}rerons$ les $pi{\grave{e}}ces$ de Michel Vinaver dont la dramaturgie oppose $l^{\prime}{\acute{e}}criture$$d{\acute{e}}constructiviste$ au principe $repr{\acute{e}}sentatif$ et ${\grave{a}}$$l^{\prime}{\acute{e}}criture$ traditionnelle en ${\acute{e}}chappant$ au principe de $causalit{\acute{e}}$. Avec sa $strat{\acute{e}}gie$ de montage $sp{\acute{e}}cifique$, il $proc{\grave{e}}de$ avec une ${\acute{e}}criture$$fragment{\acute{e}}e$ tout en $ins{\acute{e}}rant$ des dialogues $h{\acute{e}}t{\acute{e}}rog{\grave{e}}nes$. Il trouve ainsi le silence des mots, un $pr{\acute{e}}sent$ sensible, la $mat{\acute{e}}rialit{\acute{e}}$ des mots et des images ostensives ${\grave{a}}$ travers des dialogues $juxtapos{\acute{e}}s$, une $simultan{\acute{e}}it{\acute{e}}$ et une $discontinuit{\acute{e}}$ du dialogue. En examinant ses $pi{\grave{e}}ces$ de $th{\acute{e}}{\hat{a}}tre$, nous explorons cette nouvelle ${\acute{e}}criture$ qui $r{\acute{e}}siste$ au $r{\acute{e}}gime$ dramatique de la $repr{\acute{e}}sentation$. Toutefois, nous n'encenserons pas seulement cette ${\acute{e}}criture$ postmoderne. Plus $pr{\acute{e}}cis{\acute{e}}ment$, nous $rel{\grave{e}}verons$ ses limites, dans les circonstances $pr{\acute{e}}sentes$, en $r{\acute{e}}fl{\acute{e}}chissant$ aux limites du $th{\acute{e}}{\hat{a}}tre$ postmoderne depuis le $d{\acute{e}}but$ des $ann{\acute{e}}es$ 2000. Ce faisant, nous souhaitons $d{\acute{e}}finir$ de nouvelles $possibilit{\acute{e}}s$$esth{\acute{e}}tiques$.
Journal of the Korean association of regional geographers
/
v.17
no.6
/
pp.738-752
/
2011
La c$\hat{o}$te m$\acute{e}$ridionale de la Cor$\acute{e}$e du sud, et principalement la ville de Yeosu et ses environs pr$\acute{e}$sentent un int$\acute{e}$r$\hat{e}$t particulier puisque le paysage offre de nombreuses presqu'$\hat{i}$les, baies et $\hat{i}$les. Pour tirer profit de ces paysages naturels il est d'abord n$\acute{e}$ssaire de les prot$\acute{e}$ger. Malgr$\acute{e}$ la haute valeur de ces paysages naturels, ils demeurent peu connus et les analyses $\acute{e}$cotouristiques de la ville de Yeosu et ses environs sont encore incompl$\grave{e}$tes. Par ailleurs, la protection de ces paysages naturels est rendue difficile par la d$\acute{e}$sagr$\acute{e}$gation d$\hat{u}$e aux sels halo$\ddot{i}$des. Cette recherche a pour objet l'$\acute{e}$tude du tourisme physico-$\acute{e}$cologique et sa contribution au d$\acute{e}$veloppement $\acute{e}$conomique d'une r$\acute{e}$gion de Yeosu en Cor$\acute{e}$e du sud. Nous nous int$\acute{e}$ressons particuli$\grave{e}$rement au d$\acute{e}$veloppement d'une route $\acute{e}$cotouristique, aux crit$\grave{e}$res de s$\acute{e}$lection du lieu $\acute{e}$cotouristique et $\grave{a}$ la pr$\acute{e}$sentation des explications touristiques, en tenant compte de l'$\hat{i}$le de Sado et de ses paysages naturels sur le plan de l'$\acute{e}$cotourisme. Il y a plusieurs ressources $\acute{e}$cotouristiques sur l'$\hat{i}$le de Sado et dans ses environs: la plage de sable et la falaise de l'$\hat{i}$le de Sado; les traces fossiles de dinosaures, la ripple-mark et la crevasse dans le sol boueux de l'$\hat{i}$le de Joungdo; le tombolo, l'affleurement tufac$\acute{e}$ et le dyke de l'$\hat{i}$le de Silouseom; le trou provoqu$\acute{e}$ par les sels halo$\ddot{i}$des et le dyke de l'$\hat{i}$le de Jangsado; la mer ass$\acute{e}$ch$\acute{e}$e entre l'$\hat{i}$le de Naquek et l'$\hat{i}$le de Choudo. On a, g$\acute{e}$n$\acute{e}$ralement, d$\acute{e}$velopp$\acute{e}$ les reliefs li$\acute{e}$s $\grave{a}$ la couche s$\acute{e}$dimentaire et les fossiles de la derni$\grave{e}$re p$\acute{e}$riode du m$\acute{e}$sozo$\ddot{i}$que. La route $\acute{e}$cotouristique part de l'embarcad$\grave{e}$re de l'$\hat{i}$le de Sado et continue du Nord jusqu'au Sud.
In this study, to solve the major problem of reverse osmosis (RO) membrane, surface of reverse osmosis membrane was modified by silane-epoxy multi layer. Octyltrimethoxysilane (OcTES) was polymerized to membrane surface via cross-linking by Sol-gel method. n = 8 alkylgroup of OcTES formed the branch structure by self assembly. And for improve fouling resistance of RO membrane, Ether group of ethylene glycol diglycidyl ether (EGDE) was given to improve hydrophilicity of RO membrane surface by ring-opening. To analyze structure of RO membrane surface with FE-TEM and AFM. Membrane surface of the ridge and valley structure and the bridge structure was confirmed due to the multi-layer surface modification of OcTES and EGDE. And through the increase of the roughness, the branch structure was formed well on membrane surface. Through the XPS analysis was identified chemical structure of membrane surface. And confirmed that the hydrophilic surface modification is given to the surface of the film through a Contact angle analysis. In optimization of EGDE surface modification condition, was suitable 0.5 wt% EGDE concentraion and $70^{\circ}C$ ring-opening temperature. In result of fouling resistance test and MFI is SUL-H10, $PA-OcTES_{1.0}$, $PA-OcTES_{1.0}-EGDE_{0.5}$ 68.7, 60.4, 5.4 ($10E-8hr/mL^2$), multi-layer surface modified membrane improved fouling resistance.
Journal of the Korean Institute of Telematics and Electronics D
/
v.36D
no.11
/
pp.63-70
/
1999
A PLT(10) thin film has been deposited on $Pt/TiO_2/SiO_2/Si$ substrate by sol-gel method, and its switching characteristics have been investigated with various top electrode areas, input pulse voltages and loan resistances. As the external input pulse voltage increases from 2V to 5V, the switching time decreases from $0.49{\mu}s$ to $0.12{\mu}s$. The activation energy ($E_a$) obtained from the relations between the switching time and the applied pulse voltage is evaluated as 209kV/cm. The switched charge densities at 5V obtained from the hysteresis loop and the polarization switching are $11.69{\mu}C/cm^2$ and $13.02{\mu}C/cm^2$, respectively, which agree relatively well with each other and show the difference of 10%. When the top electrode area increases from TEX>$3.14{\times}10^{-4}cm^2$ to $5.03{\times}10^{-3}cm^2$ and the load resistance increases from 50${\Omega}$ to 3.3$k{\Omega}$, the switching time increases from $0.12{\mu}s$ to $1.88{\mu}s$ and from $0.12{\mu}s$ to $9.7{\mu}s$, respectively. These switching characteristics indicate that PLT(10) thin film can be well applied in nonvolatile memory devices.
Kim Sun-Jong;Shin Sang-Wan;Jung Sung-Min;Ryu Jae-Jun
The Journal of Korean Academy of Prosthodontics
/
v.43
no.1
/
pp.78-94
/
2005
Purpose. The purpose of this study was to compare the effects of various surface treatments by measuring resonance frequency and histomorphometric analyses. Material and methods. In 5 adult dogs, the mandibular premolar were extracted. Six months later, 30 screw titanium implants (Dentium Co., Seoul, Korea) 6mm in length and 3.4mm in diameter, were placed in the mandibles of 5 dogs. Implants were divided into five groups following to surface treatment methods ; Group 1 is machined controls, Group 2 is sandblasted with large grit and acid-etched (SLA), Group 3 is anodized (Autoelectric Co., Korea, 660Hz, Duty10), Group 4 is hydroxyapatite(HA) coated by ion beam assisted deposition(E-beam), Group 5 is hydroxyapatite(HA) coated with Sol-gel coating process. Resonance frequency was measured implant placement immediately, and 3, 6 weeks and 10 weeks of healing perods. With the animal subject's sacrifice 10 weeks after implantation, implants were removed on bloc and histologic and computer-based histomorphometric analyses were performed. Histomorphometric analysis involved quantification of the entire bone to metal contact around the implants. Statistical analyses were performed using the SPSS for Windows (ver. 9.0 SPSS Inc.) Statistical differences were considered significant at P<0.05. Results. The results were as follows : 1) In five groups, mean value of resonance frequency analysis(RFA) were highest in group 5 (Sol-gel implant) at implantation and those of group 4 (E-beam)was highest at 10 weeks . but there was no correlation between surface treatments and RFA. 2) In all surface treatment groups, the RFA values of implants decreased until 3 weeks and increased to 10 weeks. 3) The percentage of direct bone-to-implant contact (BIC) had statistical significance between five groups in cancellous bone, (P<0.05) the percentage of bone density inside the thread had no statistical significance between five groups. (P>0.05) 4) There was a significant difference between cortical bone and cancellous bone in BIC. (P<0.05) and bone density. (P<0.05) 5) There was a correlation between the RFA value of implants at 10 weeks and BIC in cancellous bone, and between the RFA value of implants at 10 weeks and bone density in cortical bone. (P<0.05). Conclusions. These results indicate that surface treatment does not affect the implant stability in case of good bone quality.
$^{57}Fe_xCu_{1-x}O$(x = 0.0, 0.02) powders were prepared by sol-gel method and their crystallographic and magnetic hyperfine properties have been studied using X-ray diffraction and $M{\ddot{o}}ssbauer$ spectroscopy (MS). The crystal structure of the samples is found to be monoclinic without any secondary phases and their lattice parameters increase with increasing annealing temperature ($T_A$), which is attributed to an increase in oxygen-vacancy content. MS measurements at room temperature indicate that $Fe^{3+}$ ions substitute $Cu^{2+}$ sites and ferromagnetic phase grow with increasing $T_A$. Magnetic hyperfine and quadrupole interactions of $^{57}Fe_{0.02}Cu_{0.98}O$ ($T_A=500^{\circ}C$) in the antiferromagnetic state at 17 K have been studied, yielding the following results: $H_{hf}=426.94\;kOe$, ${\Delta}E_Q=-3.67\;mm/s$, I.S.=0.32 mm/s, ${\theta}=65^{\circ}$, ${\phi}=0^{\circ}$, and ${\eta}=0.6$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.