• 생약학회지
• /
• 제45권2호
• /
• pp.93-100
• /
• 2014

The Acer tegmentosum (3 kg) were extracted with boiled water and the freeze dried extract powder was partitioned with $CH_2Cl_2$, EtOAc, n-BuOH and $H_2O$, successively. From the EtOAc and n-BuOH fraction, six phenolic compounds were isolated through the silica gel, octadecyl silica gel and sephadex LH-20 column chromatography. On the basis of spectroscopic methods, such as $^1H$-NMR and $^{13}C$-NMR, and LC/MS, the chemical structures of the compounds as feniculin (1), avicularin (2), (+)-catechin (3), (-)-epicatechin (4), salidroside (5) and 6'-O-galloylsalidroside (6). In this study, compounds 1 and 2 have been first isolated from the A. tegmentosum. To provide insight into the effects of six compounds isolated from A. tegmentosum on inflammation, we investigated its effect on nitric oxide (NO) production in RAW 264.7 cells using lipopolysaccharide (LPS) stimulation. Compounds 1 and 6 slightly repressed NO production. Also, compounds 3 and 4 inhibited NO secretion with statistical significance. However, compounds 2 and 5 did not show any inhibitory effect on NO production.

• Applied Biological Chemistry
• /
• 제46권3호
• /
• pp.268-270
• /
• 2003

굴피나무 지상부의 메탄을 추출물을 n-hexane, ethylacetate, n-butanol, $H_2O$으로 순차적으로 용매분획하였다. Ethylacetate 분획으로부터 silica gel chromatography를 반복하여 활성물질을 분리 정제하였다. 화합물은 NMR과 MS의 기기분석 결과 5-hydroxy-2-methoxy-1,4-naphthoquinone로 구조결정 되었다. 이 화합물은 in vivo 실험결과 토마토역병에 대하여 $100\;{\mu}g/ml$에서 76%의 방제효과를 나타내었다.

• 농약과학회지
• /
• 제11권2호
• /
• pp.82-86
• /
• 2007

포도나무 잎의 메탄올 추출물을 n-hexane, ethylacetate, n-butanol $H_2O$으로 순차적으로 용매분획 하였다. Ethylacetate 분획으로부터 silica gel chromatography와 재결정하여 활성물질을 분리 정제하였다. 이 화합물의 화학구조를 EI-MS의 조각 데이터를 근거로 분석한 결과 betulin으로 구조결정 되었다. 이 화합물이 고추 역병균(Phytophthora capsici), 고추 탄저병균(Colletotrichum acutatum)에 대한 항균활성(in vitro)을 측정한 결과, 100 ${\mu}g\;mL^{-1}$에서 각각 52.1%, 40.8%의 균사생육 억제효과를 보였으나, 잔디 마름병(Rhizoctonia solani) 균의 균사생육 억제 효과는 나타나지 않았다.

• Mycobiology
• /
• 제42권1호
• /
• pp.59-65
• /
• 2014

Entomopathogenic fungi are promising pest-control agents but their industrial applicability is limited by their thermosusceptibility. With an aim to increase the thermotolerance of Isaria fumosorosea SFP-198, moisture absorbents were added to dried conidial powder, and the relationship between its water potential and thermotolerance was investigated. Mycotized rice grains were dried at $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, and $40^{\circ}C$ and the drying effect of each temperature for 24, 48, 96, and 140 hr was determined. Drying for 48 hr at $10^{\circ}C$ and $20^{\circ}C$ reduced the moisture content to < 5% without any significant loss of conidial thermotolerance, but drying at $30^{\circ}C$ and $40^{\circ}C$ reduced both moisture content and conidial thermotolerance. To maintain thermotolerance during storage, moisture absorbents, such as calcium chloride, silica gel, magnesium sulfate, white carbon, and sodium sulfate were individually added to previously dried-conidial powder at 10% (w/w). These mixtures was then stored at room temperature for 30 days and subjected to $50^{\circ}C$ for 2 hr. The white carbon mixture had the highest conidial thermotolerance, followed by silica gel, magnesium sulfate, and then the other absorbents. A significant correlation between the water potential and conidial thermotolerance was observed in all conidia-absorbent mixtures tested in this study (r = -0.945). Conidial thermotolerance in wet conditions was evaluated by adding moisturized white carbon (0~20% $H_2O$) to conidia to mimic wet conditions. Notably, the conidia still maintained their thermotolerance under these conditions. Thus, it is evident that conidial thermotolerance can be maintained by drying mycotized rice grains at low temperatures and adding a moisture absorbent, such as white carbon.

• 한국식품영양학회지
• /
• 제13권2호
• /
• pp.146-151
• /
• 2000

To evaluate anticaries and antiinflammation of Aloe vera peel, antimicrobial substances were extracted from Aloe vera peel and identified. The antimicrobial active substances of water extract were successfully purified with solvent fractionation, silica gel column chromatography, preparative thin layer chromatography and UV spectrophotometer. Two purified active substances were identified as aloe-emodin and barbaloin by Mass Spectrometer, 1H-NMR and FT-IR.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.10-15
• /
• 2004

We developed a water-selective ceramic composite membrane for use as a dehydration membrane reactor for dimethylether (DME) synthesis from methanol. The membranes were modified on the porous stainless steel support by the sol-gel method accompanied by a suction process. The improved membrane modification process was effective in increasing the vapour permselectivity by removal of defects and pinholes. The optimized alumina/silica composite membrane exhibited a water permeance of 1.14${\times}$10$^{-7}$ mol/$m^2$.sec.Pa and a water/methanol selectivity of 8.4 at permeation temperature of 25$0^{\circ}C$. The catalytic reaction for DME synthesis from methanol using the membrane was performed at 23$0^{\circ}C$, and the reaction conversion was compared with that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor was much higher than that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor and the conventional fixed-bed reactor was 82.5 and 68.0%, respectively. This improvement of reaction efficiency can last if the water vapour produced in the reaction zone is removed continuously.

• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.17-22
• /
• 2003

본 연구에서는 나노기술을 이용하여 에너지 감쇠 기능을 활용한 감쇠기 개발에 대한 연구를 하였다. 유체 감쇠기를 대체하는 완충역할을 하는 미로구조를 가지는 실리카 겔 입자를 사용하였으며, 입자에 관련한 작동 유체로는 물을 사용하여 그 효과를 검증하였다. 콜로이드 감쇠기를 구현하기 인해서는 형성된 실리카 겔 입자의 표면을 유기 실리콘 매질을 이용한 소수화 코팅 처리를 하였다. 정적 하중 상태에서의 가역적 콜로이드 감쇠기에 대한 실험을 수행하였다. 콜로이드 감쇠기내 다공질 입자의 나노 유로(pore)와 다공성 입자의 직경, 다공성 입자의 구조, 그리고 대기압 상태에서 유체의 출입을 통제하기 위한 코팅처리의 분자 간 길이와 같이 여러 가지 요인의 콜로이드 감쇠기 이력현상에 대한 영향을 평가하였다. 감쇠기의 소산 에너지양과 효율에 대해서도 조사하여 유압 감쇠기 보다 뛰어난 결과를 얻었으며 콜로이드 감쇠기로 사용 가능하다는 사실을 입증하였다.

• 멤브레인
• /
• 제25권5호
• /
• pp.456-463
• /
• 2015

본 연구에서는 고온에서 우수한 전도성을 가지는 전해질막의 개발을 위하여 신규한 실란계 무기물을 합성하였으며, 이를 이용하여 제조된 분리막의 특성평가가 진행되었다. 탄화수소계열 고분자인 SPAES를 합성하여 고분자 물질로 사용하였으며, 높은 이온전도성을 가지는 무기물의 제조를 위하여 silica, phosphate, zironium계 물질을 졸겔법을 이용하여 복합화 시켰다. 각 조성의 몰비를 조절하여 세 가지 종류의 무기물을 제조하였으며 조성에 따른 물성변화를 관찰하였다. EDX 분석결과 제조된 무기물은 고분자 분리막 내에 고르게 분산이 되는 것을 확인하였다. 친수성을 가지는 무기물의 도입을 통하여 분리막 내에 이온을 전달할 수 있는 수분채널이 형성되어 함수율이 증가가 됨을 확인하였다. 또한 zirconium계 무기물의 함량이 높을수록 고온에서 전도도가 향상되는 결과를 확인하였으며 복합화된 실리카는 저온 가습조건에서 이온전도도가 향상되는 결과를 나타내었다.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.611-618
• /
• 2007

아민기로 코팅된 단분산 폴리스티렌 입자를 제조한 뒤 톨루엔-물로 구성된 유중수 액적(oil-in-water emulsion) 내부에서 입자를 자기 조립(self-assembly)시켜 다양한 다면체(polyhedra) 구조의 콜로이드 클러스터(colloidal cluster)를 제조하였다. 콜로이드 클러스터의 표면에서 솔-젤(sol-gel) 반응을 유발한 뒤 표면이 실리카로 코팅된 복합(composite) 콜로이드 클러스터를 제조할 수 있었고 이를 주형(template)으로 활용하여 고온 소성에 의해 내부의 폴리스티렌 입자를 제거하고 마이크로미터 크기의 다양한 구조의 비구형상 공동 입자(hollow particle)를 제조하였다. 밀도구배원심분리법 (density gradient centrifugation)에 의해 폴리스티렌 구성 입자의 수와 구조가 균일한 콜로이드 클러스터를 제조할 수 있었으며 표면 솔-젤 반응에 의해 비구형상 구조의 공동 입자를 제조하였다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.178-191
• /
• 2003

OMC is essentialiy necessary compound in sun goods as organic UV protecting products. But the skin-trouble problem is raising because of skin penetration of OMC. In this study, non-capsulated pure OMC was compared with Organic-Inorganic-Nano-hybrid OMC for skin penetration force and SPF degree. Organic- Inorganic Nano-Hybrid OMC is OMC trapped in the pore of the mesoporous silica synthesized by the sol-gel method after OMC is nanoemulsified in the system of the hydrogenated Lecithin/ Ethanol/caprylic/capric triglyceride/OMC/water. OMC- nano- emulsion was obtained by a microfluidizing process at 1000bar and then micelle size in the nanoemulsion solution is 100-200nm range. Mesoporous silica nano-hybrid OMC was prepared by the process; surfactant was added in dissolved OMC-Nanoemulsion, then the rod Micelle was formed. OMC-nanoemulsion was capsulated in this rod Micelle and then silica precursor was added in the OMC-nanoemulsion solution. Through the hydrolysis reaction of the silica precursor, mesoporous silica concluding OMC-Nanocapsulation was obtained. The nano-hybrid surface of this OMC-Nanoemulsion-Inorganic system was treated with polyalkyl-silane compound. OMC-Mesoporous silica Nano-hybrids coated with polyalkyl-silane compound show the higher sun protecting factor (SPF Analyzer: INDEX 10-15) than pure OMC and could reduce a skin penetration of OMC. The physico-chemical properties of these nano-hybrids measured on the SPF index, partical size, strcture, specific surface area, pore size, morphology, UV absorption, rate of the OMC dissolution using SPF Analyzer, Laser light scattering system, XRD, BET, SEM, chroma Meter, HPLC, Image analyzer, microfluidizer, UV/VIS. spectrometer.