• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.5
• /
• pp.291-299
• /
• 2005

An obstacle avoidance algorithm for a network-based autonomous mobile robot is proposed in this paper. The obstacle avoidance algorithm is based on the VFH(Vector Field Histogram) algorithm and two delay compensation methods with the VFH algorithm are proposed for a network-based robot with distributed environmental sensors, mobile actuators, and the VFH controller. Firstly, the environmental sensor information is compensated by prospection with acquired environmental sensor information, measured network delays, and the kinematic model of the robot. The compensated environmental sensor information is used for building polar histogram with the VFH algorithm. Secondly, a sensor fusion algorithm for localization of the robot is proposed to compensate the delay of odometry sensor information and the delay of environmental sensor information. Through some simulation tests, the performance enhancement of the proposed algorithm in the viewpoint of efficient path generation and accurate goal positioning is shown here.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.709-715
• /
• 2010

This paper represents a map building and localization system for mobile robot. Map building and navigation is a complex problem because map integrity cannot be sustained by odometry alone due to errors introduced by wheel slippage, distortion and simple linealized odometry equation. For accurate localization, we propose sensor fusion system using encoder sensor and indoor GPS module as relative sensor and absolute sensor, respectively. To build a map, we developed a sensor based navigation algorithm and grid based map building algorithm based on Embedded Linux O.S. A wall following decision engine like an expert system was proposed for map building navigation. We proved this system's validity through field test.

• Smart Structures and Systems
• /
• v.7 no.5
• /
• pp.393-416
• /
• 2011

Hybrid acceleration-impedance sensor nodes on Imote2-platform are designed for damage monitoring in steel girder connections. Thus, the feasibility of the sensor nodes is examined about its performance for vibration-based global monitoring and impedance-based local monitoring in the structural systems. To achieve the objective, the following approaches are implemented. First, a damage monitoring scheme is described in parallel with global vibration-based methods and local impedance-based methods. Second, multi-scale sensor nodes that enable combined acceleration-impedance monitoring are described on the design of hardware components and embedded software to operate. Third, the performances of the multi-scale sensor nodes are experimentally evaluated from damage monitoring in a lab-scaled steel girder with bolted connection joints.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.152-156
• /
• 2019

An ultraviolet (UV) image sensor is an extremely important optoelectronic device used in scientific and medical applications because it can detect images that cannot be obtained using visible or infrared image sensors. Because photodetectors and transistors are based on different materials, conventional UV imaging devices, which have a hybrid-type structure, require additional complex processes such as a backside etching of a GaN epi-wafer and a wafer-to-wafer bonding for the fabrication of the image sensors. In this study, we developed a monolithic GaN UV passive pixel sensor (PPS) by integrating a GaN-based Schottky-barrier type transistor and a GaN UV photodetector on a wafer. Both individual devices show good electrical and photoresponse characteristics, and the fabricated UV PPS was successfully operated under UV irradiation conditions with a high on/off extinction ratio of as high as $10^3$. This integration technique of a single pixel sensor will be a breakthrough for the development of GaN-based optoelectronic integrated circuits.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.473-478
• /
• 2008

Since the late 1990, "Smart clothing" has been developed in a various way to meet user centered design and human engineering that considered usability, wearability with clothing. Under this circumstance, research and development of smart clothing has been demanded usability and wearability test. But, Study of the usability evaluation for sensor based smart clothing is insufficient. In this study, we suggest criterion of usability evaluation for sensor based smart clothing that evaluate on the point of view such as wearability of clothing, interaction of clothing and devices, interaction of body and devices. we performed qualitative and quantitative test with developed smart clothing to present usability evaluation criterion for sensor based smart clothing. As a result, total 7 categories such as 'usefulness', 'wearability', 'appearance', 'riskness', 'facility of management', 'perceived change', were extracted as the usability and wearability criterion. Additionally, 28 factors of evaluation criterion for sensor based smart clothing were indicated on the result of this research. This study have meaning to indicate usability evaluation criterion for sensor based smart clothing.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.436-445
• /
• 2011

As automation systems become intelligent and autonomous for productibility, industrial networks (fieldbuses) and network-based devices are essential components of intelligent manufacturing systems. However, there are obstacles for the wide acceptance of the network-based devices such as smart sensor and network-based actuator. First, there exist numerous fieldbus protocols that a network-based device should be able to support. Second, the whole network-based device has to be replaced when only the sensor of the module fails. In order to overcome these obstacles, a smart sensor/actuator is implemented as two units; one responsible for network communication and the other for sensor/actuator operations using IEEE 1451.0 standard. This paper presents a structure of the 1451.0-based smart sensor with multiple connectivity function designed by CANopen.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.9-18
• /
• 2008

Prevention of attacks being made through program modification in sensor nodes is one of the important security issues. The software-based attestation technology that verifies the running code by checking whether it is modified or not in sensor nodes is being used to solve the attack problem. However, the current software-based attestation techniques are not appropriate in sensor networks because not only they are targeting static networks that member nodes does not move, but also they lacks consideration on the environment that the trusted verifier may not exist. This paper proposes a mutual attestation protocol that is suitable for sensor networks by using SWATT(Software-based ATTestation) technique. In the proposed protocol, sensor nodes periodically notify its membership to neighbor nodes and carry out mutual attestation procedure with neighbor nodes by using SWATT technique. With the proposed protocol, verification device detects the sensor nodes compromised by malicious attacks in the sensor network environments without trusted verifier and the sensor networks can be composed of only the verified nodes.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.1009-1013
• /
• 2012

A relationship between the sensor placement and the PDOP (Position Dilution of Precision) is derived in the TDOA-based localization system. And the geometric condition of the sensor placement is analyzed in order to get a minimum PDOP based on the derived relationship. Through computer simulations, effect of the sensor placement on the PDOP is observed.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.10
• /
• pp.99-105
• /
• 2016

The active rule system is a key element of the rule-based mobile agent middleware system for activeness and autonomy of the sensor network. The rule manager, which is the main components of active rule based mobile agent framework and active rule system, performs the control and management of the rule-related processes. In this paper, we design and implement the roles and functions of the rule manager in detail. The proposed rule manager plays an important role in the sensor network environment. The sensor data server loads the active rule on the mobile agent by the rule manager according to the situations, and the mobile agent migrates to the destination node and performs the designated action. This active rule-based mobile agent middleware system presents the usefulness for the various sensor network applications. Through the rule execution experiment using the rule-based mobile agent, we show the adaptability and applicability of rule-based mobile agent middleware system to the dynamic environmental changes in sensor networks.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.129-141
• /
• 2010

In this paper, we present a wearable intelligent device based on multi-sensor for monitoring human activity. In order to recognize multiple activities, we developed activity recognition algorithms utilizing an image sensor and a 3-axis accelerometer sensor. We proposed a grid?based optical flow method and used a SVM classifier to analyze data acquired from multi-sensor. We used the direction and the magnitude of motion vectors extracted from the image sensor. We computed the correlation between axes and the magnitude of the FFT with data extracted from the 3-axis accelerometer sensor. In the experimental results, we showed that the accuracy of activity recognition based on the only image sensor, the only 3-axis accelerometer sensor, and the proposed multi-sensor method was 55.57%, 89.97%, and 89.97% respectively.