1 |
Analog Devices (2010), "Datasheet of AD5933", Available from .
|
2 |
Bendat, J.S. and Piersol, A.G. (2003), "Engineering applications of correlation and spectral analysis", Wiley-Interscience, New York, NY.
|
3 |
Bhalla, S. and Soh, C.K. (2004), "Structural health monitoring by piezo-impedance trans-ducers ii: applications", J. Aerospace. Eng., 17(4), 166-175.
DOI
ScienceOn
|
4 |
Brincker, R., Zhang, L. and Andersen, P. (2001), "Modal identification of output-only systems using frequency domain decomposition", Smart Mater. Struct., 10(3), 441-445.
DOI
ScienceOn
|
5 |
Cho, S., Yun, C.B., Lynch, J.P., Zimmerman, A.T., Spencer, B.F. and Nagayama, T. (2008), "Smart wireless sensor technology for structural health monitoring of civil structures", Steel Struct., 8, 267-275.
|
6 |
Fasel, T.R., Sohn, H., Park, G. and Farrar, C.R. (2005), "Active sensing using impedancebased ARX models and extreme value statistics for damage detection", Earthq. Eng. Struct. D., 34(7), 763-785.
DOI
ScienceOn
|
7 |
Giurgiutiu, V. and Zagrai, A.N. (2002), "Embedded self-sensing piezoelectric active sensors for on-line structural identification", J. Vib. Acoust., 124(1), 116-125.
DOI
|
8 |
Illinois Structural Health Monitoring Project (2010), Available from:
|
9 |
Kim, J.T. and Stubbs, N. (1995), "Model uncertainty impact and damage-detection accuracy in plate girder", J. Struct. Eng., 121(10), 1409-1417.
DOI
ScienceOn
|
10 |
Kim, J.T., Ryu, Y.S., Cho, H.M. and Stubbs, N. (2003), "Damage identification in beamtype structures: frequencybased method vs modeshapebased method", Eng. Struct., 25(1), 57-67.
DOI
ScienceOn
|
11 |
Kim, J.T., Na, W.B., Hong, D.S. and Park, J.H. (2006a), "Global and local health monitoring of plate-girder bridges under uncertain temperature conditions", Steel Struct., 6, 369-376.
|
12 |
Kim, J.T., Na, W.B., Park, J.H. and Hong, D.S. (2006b), "Hybrid health monitoring of structural joints using modal parameters and EMI signatures", Proceedings of the SPIE. 6174, San Diego.
|
13 |
Kim, J.T., Park, J.H., Hong, D.S., Cho, H.M., Na, W.B. and Yi., J.H. (2009), "Vibration and impedance monitoring for prestressloss prediction in PSC girder bridges", Smart Struct. Syst., 5(1), 81-94.
DOI
|
14 |
Koo, K.Y. (2008), "Structural health monitoring methods for bridges using ambient vibration and impedance measurements", Ph.D. Dissertation, Korea Advanced Institute of Science and Technology, Daejon, Korea.
|
15 |
Krishnamurthy, V., Fowler, K. and Sazonov, E. (2008), "The effect of time synchronization of wireless sensors on the modal analysis of structures", Smart Mater. Struct., 17(5), 1-13.
|
16 |
Kurata, N., Spencer, B.F. and RuizSandoval M. (2005), "Risk monitoring of buildings with wireless sensor networks", Struct. Control Health Monit., 12(3-4), 315-327.
DOI
ScienceOn
|
17 |
Kyung, G.S., Lee, J.S., Choi, I.Y. and Hong, S.U. (2002), "Classification and analysis: deteriorations of Korean steel plate girder bridges", Proc. Korean Soc. Stl. Const., 32-40.
|
18 |
Lam, H.F., Ko, J.M. and Wong, C.W. (1998), "Localization of damaged structural connections based on experimental modal and sensitivity analysis", J. Sound. Vib., 210(1), 91-115.
DOI
ScienceOn
|
19 |
Levis, P and Gay, D. (2009, TinyOS Programming, Cambridge University Press, New York.
|
20 |
Liang, C., Sun, F.P. and Rogers, C.A. (1996), "Electro-mechanical impedance modeling of active material systems", Smart Mater. Struct., 5(2), 171-186.
DOI
ScienceOn
|
21 |
Lynch, J.P., Law, K.H., Kiremidjian, A.S., Carryer. E., Farrar, C.R., Sohn, H., Allen, D.W., Nadler, B. and Wait, J.R. (2004), "Design and performance validation of a wireless sensing unit for structural monitoring applications", Struct. Eng. Mech., 17(34), 393-408.
DOI
|
22 |
Lynch J.P., Wang, W., Loh, K.J., Yi, J.H. and Yun, C.B. (2006), "Performance monitoring of the geumdang bridge using a dense network of highresolution wireless sensors", Smart Mater. Struct., 15(6), 1561-1575.
DOI
ScienceOn
|
23 |
Mascarenas, D.L., Todd, M.D., Park, G. and Farrar, C.R., (2007), "Development of an impedancebased wireless sensor node for structural health monitoring", Smart Mater. Struct., 16(6), 2137-2145.
DOI
ScienceOn
|
24 |
Nagayama, T., Sim, S.H., Miyamori, Y. and Spencer, B.F. (2007,) "Issues in structural health monitoring employing smart sensors", Smart Struct. Syst., 3(3), 299-320.
DOI
|
25 |
Mascarenas, D.L., Park, G., Farinholt, K.M., Todd, M.D. and Farrar, C.R. (2009), "A low-power wireless sensing device for remote inspection of bolted joints", J. Aerospace Eng., 233(5), 565-575.
|
26 |
Memsic Co. (2010), "Datasheet of ISM400", Available from: .
|
27 |
Nagayama, T. (2007), "Structural health monitoring using smart sensors", Ph.D Dissertation, University of Illinois at Urbana-Champaign, UC, USA.
|
28 |
Nagayama, T., Spencer, B.F. and Rice, J.A. (2009), "Autonomous decentralized structural health monitoring using smart sensors", Struct. Control Health Monit., 16(7-8), 842-859.
|
29 |
Park, J.H., Kim, J.T., Hong, D.S., Mascarenas, D. and Lynch, J.P. (2010), "Autonomous smart sensor nodes for global and local damage detection of prestressed concrete bridges based on accelerations and impedance measurements", Smart Struct. Syst., 6(56), 711-730.
DOI
|
30 |
Park, S., Yun, C.B., Roh. Y. and Lee, J. (2005), "Health monitoring of steel structures using impedance of thickness modes at PZT patches", Smart Struct. Syst., 1(4), 339-353.
DOI
|
31 |
Park, G., Farrar, C.R., Scalea, F.L. and Coccia, S. (2006), "Performance assessment and validation of piezoelectric active-sensors in structural health monitoring", Smart Mater. Struct., 15(6), 1673-1683.
DOI
ScienceOn
|
32 |
Rice, J.A. and Spencer, B.F. (2008), "Structural health monitoring sensor development for the imote2 platform", Proceedings of the SPIE, 6932, San Diego.
|
33 |
Rice, J.A., Mechitov, K., Sim, S.H., Nagayama, T., Jang, S., Kim, R., Spencer, B.F., Agha, G.A. and Fujino, Y. (2010), "Flexible smart sensor framework for autonomous structural health monitoring", Smart Struct. Syst., 6(56), 423-438.
DOI
|
34 |
Roh, Y., Kim, D.Y., Yang, S.H., Park, S. and Yun, C.B. (2005), "PZT-induced lamb waves and pattern recognitions for online health monitoring of joint steel plates", Key Eng. Mater., 321-323, 146-151.
|
35 |
Sohn, H., Farrar, C.R., Hunter, N.F. and Worden, K. (2001), "Structural health monitoring using statistical pattern recognition techniques", J. Dyn. Syst. Meas. Control,, 123(4), 706-711.
DOI
ScienceOn
|
36 |
Sazonov, E., Jha, R., Janoyan, K., Krishnamurthy, V., Fuchs, M. and Cross, K. (2006), "Wireless intelligent sensor and actuator network (WISAN): a scalable ultralowpower platform for structural health monitoring", Proceedings of the SPIE, 6177, San Diego.
|
37 |
SHMA User Guide (2010), Available from: .
|
38 |
Sim, S.H. and Spencer, B.F. (2007), "Multiscale sensing for structural health monitoring", Proceedings of the World Forum on Smart Material and Smart Structure Technology, Chongqing & Nanjing, China.
|
39 |
Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2003), "A review of structural health monitoring literature: 1996-2001", Los Alamos National Laboratory Report, LA-13976-MS, Los Alamos, NM.
|
40 |
Spencer, B.F., RuizSandoval, M.E. and Kurata, N. (2004), "Smart sensing technology: opportunities and challenges", Struct. Control Health Monit., 11(4), 349-368
DOI
ScienceOn
|
41 |
Straser, E.G. and Kiremidjian, A.S. (1998), "A modular, wireless damage monitoring system for structure", Technical Report 128, John A. Blume Earthquake Engineering Center, Stanford University, Stanford, CA.
|
42 |
Studer, M. and Peters, K. (2004), "Multiscale sensing for damage identification", Smart Mater. Struct., 13(2), 283-294.
DOI
ScienceOn
|
43 |
Sun, F.P., Chaudhry, Z.A., Rogers, C.A., Majmundar, M., and Liang, C. (1995). "Automated real-time structure health monitoring via signature pattern recognition", Proceeding of the SPIE Conference on Smart Structures and Materials, San Diego, USA.
|
44 |
Taylor, S.G., Farinholt, K.M., Flynn, E.B., Figueiredo, E., Mascarenas, D.L., Park, G., Todd, M.D., Farrar, C.R. (2009), "A mobileagent based wireless sensing network for structural monitoring applications", Meas. Sci. Technol., 20(4), 1-14.
|
45 |
Weng, J.H., Loh, C.H., Lynch, J.P., Lu, K.C., Lin, P.Y. and Wang, Y. (2008), "Outputonly modal identification of a cablestayed bridge using wireless monitoring systems", Eng. Struct., 30(7), 1820-1830.
DOI
ScienceOn
|
46 |
Zimmerman, A.T., Shiraishi, M., Swartz, R.A. and Lynch, J.P. (2008), "Automated modal parameter estimation by parallel processing within wireless monitoring systems", J. Infrastruct. Syst., 14(1), 102-113.
DOI
ScienceOn
|
47 |
Yi, J.H. and Yun, C.B. (2004), "Comparative study on modal identification methods using output-only information", Struct. Eng. Mech., 17(3-4), 445-446.
DOI
|
48 |
Yun, C.B., Yi, J.H. and Bahng, E.Y. (2001), "Joint damage assessment of framed structures using neural networks technique", Eng. Struct., 23(5), 425-435.
DOI
ScienceOn
|