• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.819-835
• /
• 2016

In this paper, the activities carried out within the EU funded Clean Sky Joint Technology Initiative (JTI GRA) Project and aimed at developing a morphing flap, are illustrated. The reference device is a regional aircraft single slotted flap, enhanced with deforming capabilities to obtain improved hyper-lift performance. The design started with the identification of the internal architecture, intended to allow camber variations. A concentrated-hinge architecture was selected, for its ability to fit different curvatures and for the possibility of easily realizing an "armadillo-like" configuration, then avoiding the use of a complicate deformable skin. The flap layout is made of segmented ribs, elastically hinged each other and span-wise connected by conventional spars. Relative rotations of the rib elements are forced by SMA structural actuators, i.e., cooperating in the external loads absorption. Super-elastic SMA are used to make up recovery elastic elements, necessary to regain the original shape after activation. These further elements in turn contribute to the overall flap rigidity. After assessing the hinge number and the size of the SMA active and passive elements, the advanced design phase was dealt with. It was aimed at solving manufacturing issues and producing the executive drawings. The realized demonstrator was finally tested in lab conditions to prove its functionality in terms of whether target shape actuation or attained shape preservation under loads. On the basis of the numerical results and the experimental outcomes, precious hints were obtained for further developments of the concept.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.2
• /
• pp.79-87
• /
• 2002

This landscape design proposal was presented to a design competition for the KangWon Province Police Agency(KPA). The site, about 27,711 $m^2$, is located at 293-4 Udu-dong, Chunchun, KangWon-Do. Design objectives of the KPA were to build a symbolic place which fall community members with pride, to elevate an identity and status of the KPA by creating a landscape correspondent to the concept of the building design, to provide community residents with a space to enjoy cultural and social activities, and to make environment friendly space. The main concept was developed by one of characteristics of the traditional spatial structure of Korea known as an, 'Open and Closed spatial structure.'By re-interpreting the traditional spatial structure and applying it to the site, the design met the various desires of the KPA. The site is primarily segmented into 6 sub spaces; entrance space Podori plaza, symbolic court, police billeting area, sports area, and rear rest area. The entrance space, Podori plaza, and symbolic court on the south-west part of the site represent the publicity of the site as the concept of ″open space.″ On the contrary, considering the specialty of police affairs, the north-east part of the site, which contains the police billeting area and rest area, were designed to maintain security by using the concept of ″closed space.″ To express an identity of the KPA, 'Podori', a police mascot, the plaza was designed and is suppose to function as the hub of the community. In the front section of the plaza, a symmetrical planting pattern, centering the strong axis, was introduced to strengthen its symbolic meaning. Traditional window frames such as the pattern of 'Pisal-jige'and 'Umulsal-jige' were used for the paving system which is applied as the environment friendly design. Site facilities and furnitrue were placed at every important spot in order to connect various spaces organically. As these well-tied spaces properly shared their function, spatial sequence and management would be promoted. The entire space was designed to allow free access of handicapped people. This proposal is meant to create a new image of KangWon province and to enhance the way of inhabitants' think about their community.

• Architectural research
• /
• v.19 no.1
• /
• pp.13-19
• /
• 2017

In banquets of royal courts held in the late Joseon Dynasty, a procedure that follows the customs as well as physical components to follow that procedure were necessary. A noticeable trait of the red blinds(朱簾) is that they are seen in the naeyon(內宴) types of banquets, which is mostly centered on the queen dowager and relatives, and they function as a makeshift facility that divide the different banquet spaces according to the hierarchy of the royal family. Furthermore, the red blinds within the court played an important role in the procedure of the banquet along with the incense, as it was drawn upon the queen dowager's appearance to signal the beginning, and folded out again to signal the end. This indicates that they were of higher importance within the banquet space. The red blinds used in the playacting stage of the royal court not only segmented the space, but also upon being taken down, expanded and integrated the banquet hall, thereby maximizing the playacting stage. Once the banquet was finished, the red blinds within the court were once again folded out so as to restore dignity to the space. The red blind is a symbolic item that could open the private space of the court so as to enable communication with the public space, and also close it off to restore privacy. Also, the layout of the banquet space was divided by the red blinds into primary, secondary, and tertiary hierarchal space, according to the status of the royal family and the banquet attendants. In other words, the red blinds played an important role in its the symbolic meaning in the national precedent as well as distinguishing the hierarchy of space within the naeyon banquet in the royal court.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.31 no.3
• /
• pp.235-256
• /
• 2020

The purpose of this study is to define a method of building an integrated service to provide various science and technology knowledge infrastructures that are helpful in R&D activities, and to show the cases that are adapted the methodologies. Knowledge infrastructures scattered throughout the entire R&D cycle, such as generating/development of ideas, finding the R&D project, performing the project, and spreading results, are segmented in terms of services, functions, information, and data, and links and converges to provide the knowledge infrastructure that desired by users in one place. We define the integrated service classification, integration level model, integrated architecture, and integrated user authentication system in consideration of logical linkage and integration rather than physical integration of individual knowledge infrastructures. Also, we considered the extensibility as the reference model for building of similar integrated service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1073-1081
• /
• 2005

This paper describes a 3.3 V 10 bit CMOS digital-to-analog converter with a divided architecture of a 7 MSB and a 3 LSB, which uses an optimal Thermal-to-Binary Decoding method. Most of Dfh converters with hiか speed current drive are an architecture choosing current switch cell, column, row decoding method but this decoding circuit is complicated, occupies a large chip area. For these problems, this paper describes a D/A converter using an optimal Thermal-to-Binary Decoding method. The designed D/A converter with an active chip area of $0.953\;mm^2$ is fabricated by using a 0.35um process. The simulation data shows that the rise/fall time, settling time, and INL/DNL are 1.92/2.1 ns, 12.71 ns, and a less than ${\pm}2.3/{\pm}58$ LSB, respectively. The power dissipation of the D/A converter with a single power supply of 3.3 V is about 224 mW.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.1
• /
• pp.95-102
• /
• 2014

The number of industrial accident victims in the construction industry accounts for 1/3 of those in the entire industries and about 30% of the total compensation costs are spent in the construction industry. As such, the construction industry is a typical industry causing numerous safety accidents. This study analyzes the status of industrial accidents in small scale construction sites to build maximum five-story buildings by examining statistical data for the past five years, investigating those construction sites and conducting interviews with the workers. This study also seeks the causes of and measures for industrial accidents in the small scale construction industry through comparison with relevant systems. The findings are as follows: (1) To reduce hazard rate, shaping the working environment and safety measures that take into account the physically weak classes of the middle aged and the aging are urgently required, because 62.9% of the industrial accidents in the construction industry occurred to those who are 50 years of age or older. (2) The hazard rate at small scale construction sites with less than 10 construction workers accounts for 55% of that of the entire industries. The government, in this context, needs to support finance or technology and improve system by selecting the small scale construction sites, where industrial accidents occur frequently. (3) Because the hazard rate of unskilled workers with less than 6 months of work experience accounts for 90.95% of the total, safety education needs to be concentrated on those unskilled workers. (4) The relevant standards need to be segmented and revised and bolstered, given that 64.79% of death disaster in the construction industry occurs in the temporary structures including scaffolds and ladders.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.5
• /
• pp.873-887
• /
• 2015

The springing response of a large blunt ship was considered to be influenced by a second order interaction between the incoming irregular wave and the blunt geometry of the forebody of the ship. Little efforts have been made to simulate this complicated fluid-structure interaction phenomenon under irregular waves considering the second order effect; hence, the above mentioned premise still remains unproven. In this paper, efforts were made to quantify the second order effect between the wave and vibrating flexible ship structure by analyzing the experimental data obtained through the model basin test of the scaled-segmented model of a large blunt ship. To achieve this goal, the measured vertical bending moment and the wave elevation time history were analyzed using a higher order spectral analysis technique, where the quadratic interaction between the excitation and response was captured by the cross bispectrum of two randomly oscillating variables. The nonlinear response of the vibrating hull was expressed in terms of a quadratic Volterra series assuming that the wave excitation is Gaussian. The Volterra series was then orthogonalized using Barrett's procedure to remove the interference between the kernels of different orders. Both the linear and quadratic transfer functions of the given system were then derived based on a Fourier transform of the orthogonalized Volterra series. Finally, the response was decomposed into a linear and quadratic part to determine the contribution of the second order effect using the obtained linear and quadratic transfer functions of the system, combined with the given wave spectrum used in the experiment. The contribution of the second order effect on the springing response of the analyzed ship was almost comparable to the linear one in terms of its peak power near the resonance frequency.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.1
• /
• pp.153-168
• /
• 2023

Non-representation creates difference and change that can be used as a creative design method that satisfies contradictory requirements for similarity and differentiation. This study drew upon the characteristics of the concept of non-representation expressed in contemporary art and architecture, in which Gilles Deleuze's philosophical thinking was reflected, and analyzed the non-representation depicted in contemporary fashion. The non-representation expressed in contemporary art and architecture is as follows. Non-representation of delaying becoming focuses on reverting to preexisting objects and redefining traditional meaning, thereby delaying the representation of latent meaning. Non-representation of non-becoming removes existing values and typical forms and expresses amorphousness. Non-representation of becoming by repetition or reiteration realizes the difference caused by the passage of time by repeating or overlapping shapes. Non-representation of becoming expresses the transformation of space by flowing through time rather than by actual movement. Non-representation in contemporary fashion shows the following expression characteristics. First, the non-representation of deferring becoming deconstructs the traditional values and forms of clothing and expresses designs by displacement or juxtaposition. Second, the non-representation of non-becoming is expressed concepts unrelated to the body and focus upon amorphous objects that do not become concretized forms. Third, generative non-representation by repetition and overlap expresses the possibility of change by overlapping clothing items or details expressed by repeating segmented objects. Fourth, generative non-representation by movement reproduces the meaning of space and time by moving the shape of the clothing or visually changing the surface of the material of clothing. As a result of the study, the non-representation shown in contemporary fashion aims for versatility to conform to social changes. This study provides new insight into the fashion design method by increasing the understanding of the cocnept of non-representation and showing its potential.

• Journal of the Korean housing association
• /
• v.25 no.6
• /
• pp.1-10
• /
• 2014

The purpose of this study is to gain an in-depth understand of the dwelling needs of residents who are interested in Cohousing. To do this, we interviewed 18 urban residents who wanted a community life; investigated consciousness of neighbor relationships; and analyzed their consciousness of Cohousing residences, preference types, and spatial needs. At first the research has revealed that the neighbor relationships of the participants were not very close and that there was a difference in awareness levels between a 'good neighbor' and 'strange neighbor' with regard to neighbors, though all of the participants required a vitalization of these relationships. Second, Cohousing residence types could be divided into the 'life preferred type' and 'space preferred type', depending on the differences of pursued dwelling interests. These could be further segmented into the 'leisure life preferred type' and 'daily life preferred type', 'public space preferred type' and 'individual space preferred type'. Thirdly, preferences for Cohousing types varied depending on differences in priority with regard to important concepts of the social-physical environment (e.g., community property, effectiveness, naturalness, economic feasibility, and individuality). Finally, we found that the greatest needs were for public gardens and exercise space as aspects of the common spaces. Agreements pertaining to special use were considered as most important during the design process of the common spaces.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.3
• /
• pp.110-117
• /
• 2014

This paper reports a depth-adaptive sharpness adjustment algorithm for stereoscopic perception improvement, and presents its field-programmable gate array (FPGA) implementation results. The first step of the proposed algorithm was to estimate the depth information of an input stereo video on a block basis. Second, the objects in the input video were segmented according to their depths. Third, the sharpness of the foreground objects was enhanced and that of the background was maintained or weakened. This paper proposes a new sharpness enhancement algorithm to suppress visually annoying artifacts, such as jagging and halos. The simulation results show that the proposed algorithm can improve stereoscopic perception without intentional depth adjustments. In addition, the hardware architecture of the proposed algorithm was designed and implemented on a general-purpose FPGA board. Real-time processing for full high-definition stereo videos was accomplished using 30,278 look-up tables, 24,553 registers, and 1,794,297 bits of memory at an operating frequency of 200MHz.