• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.133-138
• /
• 2007

The balance shaft housing in the recent engines tends to have the high cycle fatigue crack caused by increased engine power. In this paper, a CAE procedure is introduced to predict the durability of the balance shaft housing. The procedure is performed through two analysis steps. In the first step, the multibody dynamic simulation is used to obtain more accurate loading boundary conditions applied to the finite element model for the following step. Next, the finite element analysis is performed to predict the durability of the balance shaft housing through the calculation of the safety factor. Through this CAE procedure, the revised balance shaft housing was developed to improve the durability. And the durability of the housing was confirmed experimentally.

• 대한안전경영과학회지
• /
• 제5권4호
• /
• pp.229-243
• /
• 2003

This paper suggests the process of performance measurement system development for B2B e-Marketplace using BSC (Balanced Scorecard). As the first step, main features and factors affecting performance of e-Business company and especially of B2B e-Marketplaces were derived based on the literatures. For the 2nd step, the nonnative performance measurement model for B2B e-Marketplace was suggested. Especially, the research range that the model covers is restricted to the neutral and systematic sourcing B2B e-Marketplace. And, the performance measurement model was based on BSC, for the BSC is very powerful and sound tool among all the available performance measurement systems. Also, the model was based on the AHP (Analytic Hierarchy Process) to make the model more structured, and to draw weights of performance measures from experts

• 전기학회논문지
• /
• 제57권3호
• /
• pp.344-353
• /
• 2008

To apply the appropriate new grounding system to domestic power system, safety has to be guaranteed under the given circumstances. It is not possible to decide the safety of grounding systems by the experimental test because safety experiments directly relate to the human life and the installed electric machines. Therefore, the computer simulation program to decide the safety of grounding systems based on the IEC standard systems, has to be developed. This paper proposes the computer simulation based method to decide the safety of grounding system with the concepts of touch voltage, step voltage, human resistivity, and applied electric current according to the several conditions of human body located in the corresponding grounding systems. The proposed method is implemented by Matlab/Simulink and Visual C++ programming tools for its visualization.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.67-72
• /
• 2015

Although attention to terrorism has increased sharply in recent years within many countries, it is by no means a new phenomenon. Majority of these countries have limited regulations or guidelines about terrorism. LOP (Level Of Protection) can be consider as a first step. This paper seeks to present a process to determine LOP and allowable damage. LOP is determined by asset value reason why it should be based on cost. The asset value is defined as "cost induced when asset is damaged". For example, the collateral damage outside the facility should be taken in consideration in the asset value. Allowable structural damage is assigned depending on LOP.

• 한국안전학회지
• /
• 제35권2호
• /
• pp.61-66
• /
• 2020

As asbestos-containing buildings are getting older, asbestos deconstruction works are increasing. As a result, accident risks such as falls, cuts, electric shocks, and suffocation are increasing. Existing studies are mostly about health management and institutional policy research and there is little research on work risk. So workplace risk assessments that are easily applicable in the field are required to be applied. Sealing is the first process of asbestos deconstruction and is the first step to ensure worker's safety. Job Safety Analysis(JSA) and Checklist were used to identify the risk factors and to calculate the level of the risk. By comparing the two risk assessment tools, it was figured out that the JSA is appropriate for the initial process and change of work procedure while Checklist is appropriate for repetitive work. Because the sealing process is sort and simple, it is unlikely to cause serious injury. But since the risk of falling and cuts are exist, safety education and supervision are necessary to maintain a safe working environment.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.47-57
• /
• 2003

Construction Management(CM) system, which was introduced some years ago to large national construction projects, such as the construction of Incheon New Airport, construction of high-speed railroad and World Cup stadiums, is considered to be still in its early stage and safety at each step of CM is very poorly controlled. In an attempt to improve such inferior safety management of domestic CM, this study made comparative analysis about operation system of safety management with CM system in domestic and abroad. Also suggested the model under consideration with CM, which is suitable for the situation of Korea.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.290-295
• /
• 2004

In railway system, the first step of safety managements is the identification of current safety level. Among many safety indexes, risk concept is the prevailing and most effective one in many developed countries for the safety management. But many requirements such as, accident classification rule, risk levels or broadly acceptable regions, safety cost benefit analysis, VPF, equivalent fatality and failure database are needed for the application of risk concept in railway. Basic requirements for the application of risk concept on railway safety improvements are derived in this study.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.169-170
• /
• 2020

Occupational Safety and Health Management Cost, used to protect workers in Korean construction worksites and to create safe working environments, is a legally managed expense item. As this cost item is grounded on the Occupational Safety and Health Act, it is always implemented. However, because there is a ceiling on its rates, insufficient amounts of Safety Management Costs are often allocated to worksites, with the money not being used to areas essential to worker safety. As such, the current study raises the need to develop a set of standards to enable some items under the Occupational Safety and Health Management Costs-appropriated under the rate of indirect costs-to be appropriated as direct construction costs. As a preliminary step in this effort, the current study will provide basic data that can be used to create construction cost calculation standards for items that can be calculated as direct construction costs.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.127-136
• /
• 2006

In 2002 Product Liability Act newly got into effect in Korea so that efforts for Product Safety got a new chance to promote safety standardization. Under the supervision of the Korean Agency for Technology and Standards (ATS) and the Korea Standards Association (KSA), the enterprise titled "Standardization of Product Safety" took the first step in 2000. Thenceforth a lot of standards and guidelines for product safety have been developed. The results of the enterprise were in the type of technical manual as well as report, technical guidelines, and specific technical safety standards. In this paper, the authors narrated those sequential efforts for Product Safety, and introduced the basic concept on which standardization of Product Safety Management System was conducted and individual safety standard has been developed. Based on this systematic concept, a global road-map as well as specific road-maps for developing safety standards in individual industry were supplied. Finally, suggestions for proceeding to the whole risk management system including other risky factors were appended.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.919-922
• /
• 2008

The objective of this study is to design the full-scale fire test facility of the railroad vehicle with CFD simulation. In the results, the step expansion system should be good enough for the measuring system. Uniform flow is achieved at eight-to-ten diameters of the expanded duct behind the step for moderate expansion ratios($D_{orifice}/D_{duct}$ = 2 being a good choice). To optimization of the fire products collector system with 5 dampers, the additional CFD simulation was also carried out. These results will be help for the railroad fire safety research.