• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.1
• /
• pp.45-48
• /
• 2010

An inter-pin skew compensation scheme is proposed, which minimizes the inter-pin skew of parallel interface induced by unequal trace length and loading of printed circuit board (PCB). The proposed scheme measures the inter-pin skew and compensates during power-up with simple hardware. The proposed scheme is applied to 3.2-Gb/s/pin DDR4 SDRAM and implemented in a 0.18 m CMOS process. The inter-pin skew is compensated in 324-cycles of 400-MHz clock and the skew is compensated to be less than 24-ps.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.06a
• /
• pp.1323-1326
• /
• 1998

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1183-1190
• /
• 1999

This paper presents an efficient hardware architecture to improve the frame memory interface occupying the largest hardware area together with motion estimator in implementing MPEG-2 video encoder as an ASIC chip. In this architecture, the memory size for internal data buffering and hardware area for frame memory interface control logic are reduced through the efficient memory map organization of the external SDRAM having dual bank and memory access timing optimization between the video encoder and external SDRAM. In this design, 0.5 m, CMOS, TLM (Triple Layer Metal) standard cells are used as design libraries and VHDL simulator and logic synthesis tools are used for hardware design add verification. The hardware emulator modeled by C-language is exploited for various test vector generation and functional verification. The architecture of the improved frame memory interface occupies about 58% less hardware area than the existing architecture[2-3], and it results in the total hardware area reduction up to 24.3%. Thus, the (act that the frame memory interface influences on the whole area of the video encoder severely is presented as a result.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.115-120
• /
• 2005

This paper describes the design and implementation of engineering model(EM) of Mass Memory Unit(MMU) for Science and Technology Satellite 2(STSAT-2) and the results of integration test. The use of Field-Programmable Gate Array(FPGA) instead of using private electric parts makes a miniaturization and lightweight of MMU possible. 2Gbits Synchronous Dynamic Random Access Memory(SDRAM) module for mass memory is used to store payload and satellite status data. Moreover, file system is applied to manage them easily in the ground station. RS(207,187) code improves the tolerance with respect to Single Event Upset(SEU) induced in SDRAM. The simulator is manufactured to verify receiving performance of payload data.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.3
• /
• pp.315-320
• /
• 2012

We developed a mass-memory chip by staking 1 Gbit double data rate 2 (DDR2) synchronous dynamic random access memory (SDRAM) memory core up to 4 Gbit storage for future satellite missions which require large storage for data collected during the mission execution. To investigate the resistance of the chip to the space radiation environment, we have performed heavy-ion-driven single event experiments using Heavy Ion Medical Accelerator in Chiba medium energy beam line. The radiation characteristics are presented for the DDR2 SDRAM (K4T1G164QE) fabricated in 56 nm technology. The statistical analyses and comparisons of the characteristics of chips fabricated with previous technologies are presented. The cross-section values for various single event categories were derived up to ~80 $MeVcm^2/mg$. Our comparison of the DDR2 SDRAM, which was fabricated in 56 nm technology node, with previous technologies, implies that the increased degree of integration causes the memory chip to become vulnerable to single-event functional interrupt, but resistant to single-event latch-up.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.55-61
• /
• 2000

This paper presents an efficient hardware architecture of frame memory interface in MPEG-2 video encoder. To reduce the size of memory buffers between SDRAM and the frame memory module, the number of clocks needed for each memory access is minimized with dual bank operation and burst length change. By allocating the remaining cycles not used by SDRAM access, to the random access cycle, the internal buffer size, the data bus width, and the size of the control logic can be minimized. The proposed architecture is operated with 54MHz clock and designed with the VT $I^{тм}$ 0.5 ${\mu}{\textrm}{m}$ CMOS TLM standard cell library. It is verified by comparing the test vectors generated by the c-code model with the simulation results of the synthesized circuit. The buffer area of the proposed architecture is reduced to 40 % of the existing architecture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.175-182
• /
• 2011

In this paper, we implemented a high-performence memory controller which can accommodate processing blocks(multiple masters) in SoC for video signal processing. The memory controller is arbitrated by the internal arbiter which receives request signals from masters and sends grant and data signals to masters. The designed memory controller consists of Master Selector, Mster Arbiter, Memory Signal Generator, Command Decoder, and memory Signal Generator. It was designed using VHDL, and verified using the memory model of SAMSING Inc. For FPGA synthesis and verification, Quartus II of ATERA Inc. was used. The target device is Cyclone II. For simulation, ModelSim of Cadence Inc was used. Since the designed H/W can be stably operated in 174.28MHz, it satisfies the specification of SDRAM technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.57-62
• /
• 2011

In this paper, an efficient architecture for MFVLD(Multi-Format Variable Length Decoder) which can process H.264, MPEG-2, MPEG-4, AVS, VC-1 bitstream is proposed. The proposed MF-VLD is designed to be adapted to the MPSOC (Multi-processor System on Chip) architecture, uses bit-plane algorithm for the processing of inverse quantized data to reduce the width of AHB bus. External SDRAM is used to minimize the internal memory size. In this architecture, the adding or removing each variable length decoder can be easily done by using multiplexor. The designed MF-VLD can be operated in 200MHz at 0.18um process. The gate size is 657K gate and internal memory size is 27Kbyte.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1653-1658
• /
• 2009

SoC(System on a Chip) has several masters, slaves, arbiter and decoder in bus architecture. Master initiates the data transactions like CPU, DMA and DSP and slave responses the data transactions like SRAM, SDRAM and register. Furthermore, as multiple masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, SoC performance can be changed definitely. In this study, we compare the characteristics of various arbitration policies using TLM(Transaction Level Model) method. Fixed priority, round-robin, TDMA and Lottery bus policies are used in general arbitration method. We analyze the merit and demerit of these arbitration policies.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.2
• /
• pp.211-218
• /
• 2001

In this paper, we propose the structure of utilizing the memory map, which is using not conventional DRAM but SDRAM, for the hardware implementation of frame memory interface module to the video encoder. As reducing the size of memory map and interface buffer within the same bus, the hardware complexity is improved and the hardware size is minimized as simplifying the interface logic. The conventional system is wasted access time, because of accessing randomly stored data in order to store and output the memories in macro-block unit. therefore the method, which is proposed in this paper, can be effectively reducing the access time of memory, because of the data is stored and processed by line unit.