• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.2
• /
• pp.18-27
• /
• 2022

In this study, the time-dependent chloride ingress behavior in GGBFS concrete was evaluated considering marine exposure conditions and the properties of concrete mixtures. The concrete mixture for this study had 3 levels of water to binder ratio and the substitution rate of GGBFS, and outdoor exposure tests were performed considering submerged area, tidal area, and splash area. According to the evaluation results of diffusion coefficient considering properties of concrete mixtures, as the substitution rate of GGBFS increased, the decreasing rate of the diffusion coefficient decreased based on exposure periods of 730 days(2 years). As the evaluation result of the diffusion behavior according to the marine exposure conditions, the diffusion coefficient was evaluated in the order of submerged area, tidal area, and splash area. In tidal area, a relatively high diffusion coefficient was evaluated due to the repetition of wet and dry seawater. In this study, the effects of GGBFS substitution rate on the decreasing behavior of apparent chloride diffusion coefficient was analyzed in consideration of exposure conditions and periods. Linear regression analysis was performed with apparent chloride diffusion coefficient as output value and GGBFS substitution rate as input value. After 730 days of exposure, the effect of GGBFS on diffusion coefficient was significantly reduced. Even for OPC concrete, after 730 days, the diffusion coefficient was as low as that of GGBFS concrete, so the gradient of the regression equation decreased significantly. It is thought that improved durability performance for chloride ingress can be secured before 730 days through the use of GGBFS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.77-84
• /
• 2022

This study aimed to evaluate the growth, yield, and grain quality characteristics of rice varieties that were subjected to water stress during the tillering stage. We also sought to identify whether water stress could be indicated via the plants' response to chlorophyll fluorescence. In this study, we induced water stress by intentionally cutting off water for 30 days, starting 15 days after transplanting the rice varieties to a greenhouse. We analyzed nine rice varieties, including Ilpum, which is the most frequently cultivated variety in Gyeongsangbuk-do, South Korea. The control group was planted in a paddy field where irrigation was entirely dependent on rainfall. Our results revealed that the heading stage of the nine studied varieties occurred approximately ten days earlier in the rain shelter than in the field. Moreover, the rice yield, head rice rate, and palatability score decreased by 18.6%, 17.1%, and 8.3%, respectively, while protein content increased by 20.2% compared with the control group. The Saenuri and Haimi varieties showed the lowest reduction in yield under the water stress conditions, while the Daebo and Samkwang varieties showed the highest reduction in yield. The chlorophyll fluorescence response after re-irrigation was measured between July 30^th and August 17^th. The ratio of variable fluorescence to maximum chlorophyll fluorescence (F_V/F_M) values failed to recover to their baseline values, resulting in either no change or a reduction in fluorescent response, even after re-irrigation of Daebo and Samkwang varieties. These results can be utilized as empirical data for drought-affected farms to select resistant varieties that can respond to spring drought in the southern plains of Gyeongsangbuk-do.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.636-645
• /
• 2022

In this study, we investigated the adsorption characteristics of methyl orange (MO), an anionic dye, on ginkgo shell-based activated carbon (AC). For this purpose, ACs (GS-1, GS-2, and GS-4) with different textural properties were prepared using ginkgo shells and potassium hydroxide (KOH), a representative chemical activating agent. The correlation between the textural characteristics of AC prepared and the mixing ratio of KOH was investigated using nitrogen adsorption/desorption isotherms. The MO adsorption equilibrium experiment on the prepared ACs was conducted under different pH (pH 3~11) and temperature (298~318 K) conditions, and the results were investigated by Langmuir, Freundlich, Sips and temperature-dependent Sips equations. The feasibility of the MO adsorption treatment process of the prepared AC was also investigated using the dimensionless Langmuir separation factor. The heterogeneous adsorption properties of MO for the prepared AC examined using the adsorption energy distribution function (AED) were closely related to the system temperature and textural characteristics of AC. The kinetic results of the batch adsorption performed at different temperatures can be satisfactorily explained by the homogeneous surface diffusion model (HSDM), which takes into account the external mass transfer, intraparticle diffusion, and active site adsorption. The relationship between the activation energy value obtained by the Arrhenius plot and the adsorption energy distribution function value was also investigated. In addition, the adsorption process mechanism of MO on the prepared AC was evaluated using Biot number.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.5
• /
• pp.183-190
• /
• 2022

Diopside (CaMgSi₂O₆) is known to have high bioactivity as well as excellent mechanical properties. In this study, we tried to improve the bioactivity of zirconia ceramics by surface coating of diopside and its bioactivity was investigated through an in vitro test. Surface coating on zirconia substrate was prepared by sol-gel method using a diopside sol which was prepared by dissolving Ca(NO₃)₂·4H₂O, MgCl₂·6H₂O and Si(OC₂H₅)₄ in ethanol with a fixed molar ratio and then hydrolysis. To examine the bioactivity of diopside coating, we examined the surface dissolution and the precipitation of new hydroxyapatite particles through in vitro test in SBF (Simulated Body Fluid) solution. Dense and thick diopside coating layers could be fabricated on zirconia substrate by sol-gel method. Also, we confirmed that they contained high bioactivity from the in vitro test, indicated the precipitation of hydroxyapatite particles after the 14 days immersion in SBF solution. In addition, we checked that the bioactivity of diopside coated layers was dependent on the repeated coating cycle and coating thickness.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.4
• /
• pp.7-24
• /
• 2021

Objective : This study examined the characteristics of the literature involving a single-subject research design among positive behavior support intervention studies to improve problem behavior in children with autism spectrum disorders and assess the quality level. Methods : This is a literature study, and the targets of analysis were nine single-subject research papers published between 2011 and 2020. The subject papers were analyzed by dividing them into general characteristics and the qualitative levels according to the content of the research method. Results : Analysis of analyzing the contents of the study showed that the subjects were preschool and elementary school-age children at the same ratio. Furthermore, the study design involved mostly the middle and multiple baseline designs among the behaviors. All papers presented social validity, intervention fidelity, and observer reliability. Problem behaviors included self-injury and aggression behaviors, disturbing behaviors, and seat break-away behaviors, while the most dependent variables were measured through partial interval recording. As a result of confirming the intervention effect, the effect was confirmed in intervention, maintenance, and generalization. All analysis studies showed high-quality levels. Conclusion : This study confirmed the content and qualitative level of the thesis that applied the single-subject research design among positive behavior support intervention studies for problem behaviors of children with autism spectrum disorders. Positive behavior support intervention, an evidence-based intervention for children with autism spectrum disorders, was confirmed an effective intervention for autism spectrum disorders.

• Korean Journal of Culture and Social Issue
• /
• v.27 no.4
• /
• pp.475-503
• /
• 2021

The purpose of this study is to clarify the constructs of emotion suppression and help understanding on the multidimensional nature of emotion suppression by classifying constructs for suppression according to the KMW model. Also, this study examined the gender differences of emotion suppression. For this purpose, 657 adult male and female subjects were evaluated for attitude toward emotions, and difficulty in emotional regulation, as well as depression, state anger and daily stress scale. As a result of the exploratory factor analysis on the scales related to the emotion suppression factors, the emotion suppression factors corresponding to each stage of the KMW model were found to be 'distraction against emotional information, 'difficulty in understanding and interpretation of emotions', 'emotion control beliefs', 'vulnerability on emotional expression beliefs'. Next, the study participants were classified by performing a cluster analysis based on each emotion suppression factor. As a result, four clusters were extracted and named 'emotional control belief cluster', 'emotional expression cluster', 'emotional attention failure cluster', and 'general emotional suppression cluster'. As a result of examining the average difference of male depression, depression, state anger, and daily stress for each group, significant differences were found in all dependent variables. As a result of examining whether there is a difference in the frequency of emotional suppression clusters according to gender, the frequency of emotional suppression clusters was high in men, and the ratio of emotional expression clusters was high in women. Finally, it was analyzed whether there was a gender difference in the effect of the emotional suppression cluster on psychosocial adaptation, and the implications were discussed based on the results of this study.

• Biomolecules & Therapeutics
• /
• v.31 no.1
• /
• pp.73-81
• /
• 2023

Sirtuins (SIRTs) belong to the nicotinamide adenine dinucleotide (NAD+)-dependent class III histone deacetylase family. They are key regulators of cellular and physiological processes, such as cell survival, senescence, differentiation, DNA damage and stress response, cellular metabolism, and aging. SIRTs also influence carcinogenesis, making them potential targets for anticancer therapeutic strategies. In this study, we investigated the anticancer properties and underlying molecular mechanisms of a novel SIRT1 inhibitor, MHY2251, in human colorectal cancer (CRC) cells. MHY2251 reduced the viability of various human CRC cell lines, especially those with wild-type TP53. MHY2251 inhibited SIRT1 activity and SIRT1/2 protein expression, while promoting p53 acetylation, which is a target of SIRT1 in HCT116 cells. MHY2251 treatment triggered apoptosis in HCT116 cells. It increased the percentage of late apoptotic cells and the sub-G1 fraction (as detected by flow cytometric analysis) and induced DNA fragmentation. In addition, MHY2251 upregulated the expression of FasL and Fas, altered the ratio of Bax/Bcl-2, downregulated the levels of pro-caspase-8, -9, and -3 proteins, and induced subsequent poly(ADP-ribose) polymerase cleavage. The induction of apoptosis by MHY2251 was related to the activation of the caspase cascade, which was significantly attenuated by pre-treatment with Z-VAD-FMK, a pan-caspase inhibitor. Furthermore, MHY2251 stimulated the phosphorylation of c-Jun N-terminal kinase (JNK), and MHY2251-triggered apoptosis was blocked by pre-treatment with SP600125, a JNK inhibitor. This finding indicated the specific involvement of JNK in MHY2251-induced apoptosis. MHY2251 shows considerable potential as a therapeutic agent for targeting human CRC via the inhibition of SIRT1 and activation of JNK/p53 pathway.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.8 no.2
• /
• pp.53-61
• /
• 2022

This study aimed to increase the targeting ability against PSMA in cell therapy using metabolic glycoengineering and biorthogonal chemistry and to visualize cell trafficking using PET imaging. Cellular membranes of THP-1 cells were decorated with azide(-N₃) using Ac₄ManNAz by metabolic glycoengineering. Engineered THP-1 cells were conjugated with DBCO-bearing fluorophore (ADIBO-Cy5.5) for 1 h at different concentrations and analyzed by confocal fluorescence microscopy and flow cytometry. For PSAM ligand conjugation to THP-1 cells, Ac₄ManNAz treated THP-1 cells were incubated with DBCO-PSMA ligand (ADIBO-GUL) at a final concentration with 100 µM for 1 h. To evaluate the effect on cell recognition, PSMA ligand conjugated THP-1 cells(as effectors) were co-cultured with PSMA positive 22RV1 (as target cells) at 3 : 1 a effector-to-target cell (E/T) ratio. The interaction between THP-1 and 22RV1 was monitored by confocal fluorescence microscopy. For preparing the radiolabeled THP-1, the cells were treated at the activity of ~ 740 kBq of [⁸⁹Zr]Zr(oxinate)₄/5 × 10⁶ cells. Radiolabeled cells were analyzed for determination of cell-associated radioactivity by gamma counting and viability using MTS assay. In the cytotoxicity assay, THP-1 cells did not have any cytotoxicity even when the Ac₄ManNAz concentration was 100 µM. In confocal microscopy and flow cytometry, THP-1 cells were efficiently labeled ADIBO-Cy5.5 in a dose-dependent manner, and the dose of 100 µM was the optimal concentration for the following experiments. The clusters of PSMA ligand-conjugated THP-1 cells and 22RV1 cells were identified, indicating cell-cell recognition over the cell surface between two types of cells. Cell radiolabeling efficiency was 54.5 ± 17.8%. THP-1 labeled with 0.09 ± 0.03 Bq/cell showed no significant cytotoxicity compared to unlabeled THP-1 up to 7 days. We successfully demonstrated that Ac₄ManNAz treated cells were efficiently conjugated with ADIBO-GUL for preparing the PSMA-targeting cells, and [⁸⁹Zr]Zr(oxinate)₄ could be used to label cells without toxicity. It suggested that PSMA-ligand conjugated cell therapy could be improved cell targeting and be monitored by PET imaging.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.17-33
• /
• 2007

Downhole seismic method is widely used for obtaining shear wave velocity profile of a site because it is simple and economical. Determining accurate travel time of shear wave is very important to obtain reliable result in downhole seismic method. In this paper, comparison study of various travel time determination methods was performed. Numerical study and model chamber test were performed for effective comparison study. Signal traces were acquired by performing downhole test at each numerical simulation and soil box test. Travel time data for each signal traces were determined by using six different methods and Vs profiles were evaluated. Comparing travel time data and Vs profiles with the reference value, the first arrival picking method proved to be ambiguous and unreliable. Other methods also did not always provide accurate results and the magnitude of error was dependent on the signal to noise ratio. Cross-correlation method proved to be the most adequate method for the field application and it was verified additionally with field data.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.11
• /
• pp.47-54
• /
• 2006

Shear wave velocity of uncemented soil can be expressed as the function of effective stresses when capillary phenomena are negligible. However, the terms of effective stresses are divided into the direction of wave propagation and polarization because stress states are generally anisotropy. The shear wave velocities are affected by ${\alpha}$ parameters and ${\beta}$ exponents that are experimentally determined. The ${\beta}$ exponents are controlled by contact effects of particulate materials (sizes, shapes, and structures of particles) and the ${\alpha}$ parameters are changed by contact behaviors among particles, material properties of particles, and type of packing (i.e., void ratio and coordination number). In this study, consolidation tests are performed by using clay, mica and sand specimens. Shear wave velocities are measured during consolidation tests to investigate the stress-induced and inherent anisotropies by using bender elements. Results show the shear wave velocity depends on the stress-induced anisotropy for round particles. Furthermore, the shear wave velocity is dependent on particle alignment under the constant evvective stress. This study suggests that the shear wave velocity and the shear modulus should be carefully estimated and used for the design and construction of geotechnical structures.