• 한국의류학회지
• /
• 제29권7호
• /
• pp.959-967
• /
• 2005

The color of apparels has the interaction of the face skin colors of the wearers. This study was carried out to classify the face skin colors of Korean males into several similar face skin colors in order to extract favorable colors which flatter to their face skin colors. The criterion that select the new subjects who have the classified face skin colors have to be decided. With color spectrometer, JX-777, face skin colors of subjects were measured quantitatively and classified into three clusters that had similar hue, value and chroma with Munsell Color System. Sample size was 418 Korean males and other 15 of new males subjects. Data were analyzed by K-means cluster analysis, ANOVA, Duncan multiple range test, Stepwise discriminant analysis using SPSS Win. 12. Findings were as follows: 1. 418 subjects who have YR colors were clustered into 3 kinds of face skin color groups. 2. Discriminant variables of face skin colors was 4 variables : L value of forehead, v value of cheek, c value of forehead, and b value of cheek from standardized canonical discriminant function coefficient 1 and c value of forehead, L value of forehead, b value of cheek. and L value of cheek from standardized canonical discriminant function coefficient 2. 3. Hit ratio of type 1 was $92.3\%$, of type 2 was $96.5\%$ and of type 3 was $92.6\%$ by the canonical discriminant function of 4 variables. 4. The canonical discriminant function equation 1 and 2 were calculated with the unstandardized canonical discriminant function coefficient and constant, the cutting score, and range of the score were computed. 5. The criterion that select the new subjects who have the classified face skin colors was decided.

• 소성∙가공
• /
• 제22권1호
• /
• pp.23-29
• /
• 2013

In this study, a micro/nano-random-pattern-structure surface was machined by electric discharge machining (EDM) followed by replicating the EDM surface with a silicone elastomer having low energy and greater hydrophobicity. The variation of hydrophobicity was of prime interest and was examined as a function of the surface roughness of the replicated silicone elastomer. The hydrophobicity was evaluated by the water contact angle (WCA) measured on the relevant surface. For the experiments, the original surfaces were machined by die sinking electric discharge machining (DS-EDM) and wire cutting electric discharge machining (WC-EDM). The ranges of surface roughness were Ra $0.8{\sim}19{\mu}m$ for the DS-EDM and Ra $0.5{\sim}4.7{\mu}m$ for the WC-EDM. In order to fabricate a hydrophobic surface, the EDM surfaces were directly replicated using a liquid-state silicone elastomer, which was thermally cured. The measured WCA on the replicated surfaces for DS-EDM was in the range of $115{\sim}130^{\circ}$ and for WC-EDM the WCA was in the range of $123{\sim}150^{\circ}$. Additionally, the dynamic hydrophobicity was evaluated by measuring an advancing and a receding WCA on the replicated silicone elastomer surfaces.

• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.395-401
• /
• 2022

이 연구에서는 프리텐션 기법으로 제작되는 중공 슬래브(hollow core slab, HCS) 부재 3종(H200, H320, H400)에 대하여 강연선의 전달길이를 평가하고 기존 설계식과 비교하였다. HCS 부재의 측면에 일정한 간격을 두어 변형률 게이지를 부착하였으며, 절단 과정에서 발생하는 변형률을 측정하였다. 변형률은 절단면에서 0이며, 부재의 중앙으로 갈수록 점차 증가하여 전달길이 위치에서 일정한 값을 보인다. 강연선이 한 가닥씩 배치되는 H200의 경우 대부분 설계식 범위 내(최대 762 mm)에 전달길이가 형성되나, 강연선이 세 가닥 배치되는 H320과 H400의 전달길이는 설계 범위보다 높은 수준(850 mm 이상)으로 나타났다.

• Parasites, Hosts and Diseases
• /
• 제31권2호
• /
• pp.135-140
• /
• 1993

실험적으로 스파르가눔을 프라지콴텔 처치, 감마선 조사 및 기계적 절단을 시행하고 마우스에 경구감염시켜 감염력을 관찰하였다. 스파르가눔은 유혈목이(Rhabdophis tigrina)로 부터 분리 수집한 것 또는 실험감염 마우스로 부터 회수한 것이었으며 마우스는 서울대학교 동물실험실로 부터 공급받은 ICR계이었다. 스파르가눔은 $10{\;}\mu\textrm{g}/ml$ 농도의 프라지콴텔용액(대조군: Tyrode용액에서 4시간 배양)에 넣어 $36^{\circ}C$ 배양기에서 30분, 1, 2 및 4시간 동안 배양한 다음 각 실험군당 4들마리의 마우스에 각각 5마리씩 경구감염시키고 1개월 후에 충체를 회수하였던 바, 각각 평균 80%(대조군), 100%, 80%, 80% 및 76%의 회수율을 나타내었다. 스파르가눔을 $Cs^{l37}$ 감마선으로 10, 30, 50, 75, 100, 150 및 1000 Gy로 조사한 다음 각 군당 2틱마리의 마우스에 각각 5마리씩 경구감염시키고 1개월 후에 충체를 회수하였던 바, 각각 평균 96%(대조군), 100%, 76%, 93%, 77%, 69%, 56% 및 5%의 회수율을 나타내었다. 두절의 전단으로 부터 각각 0.5, 1, 2 및 3 mm 부위를 잘라서 각 군당 4-5마리의 마우스에 각각 5마리씩 경구감염시키고 1개월 후에 충체를 회수하였던 바, 80%, 90%, 70%, 88% 및 90%(대조군)의 회수율을 나타내었다. 이상의 결과로 스파르가눔이 프라지콴텔, 감마선 및 기계적 절단에 대하여 매우 저항성이 높으며 마우스에서의 감염력 및 재생력을 나타내는 부위가 스파르가눔의 두절 앞 끝에 위치함을 알 수 있었다.

• 농업생명과학연구
• /
• 제44권3호
• /
• pp.23-30
• /
• 2010

본 실험은 Dendrobium nobile 계통의 교잡종인 'Hamana Lake Dream' ${\times}$ 'No. 55' 유묘의 기내삽목 시 증식 및 생육에 알맞은 배지와 배양조건을 구명하고자 실시하였다. Hyponex배지보다 MS배지에서 생장이 잘되었는데 MS배지에 활성탄을 0.1과 1.0g/L 수준에서 첨가했을 때 줄기수와 엽장, 근수, 생체중이 양호 하였으나 2.0g/L이상에서는 감소하였으나 통계적 유의성은 없었다. MS배지에 agar, sucrose, peptone, gelite 를 농도별로 첨가한 실험에서는 agar 5g/L 첨가 시 줄기 길이와 엽폭, 생체중의 값이 높았고, 절간장과 근수는 sucrose 40g/L을 첨가했을 때 효과적이었다. 또한 줄기수와 엽수는 peptone 1g/L에서 효과적이었으나 gelite는 모든 농도에서 대조구에 비해 저조하였다. 기내삽목 시 배양온도는 $28^{\circ}C$가 알맞았고 동일한 온도조건에서는 MS배지가 Hyponex배지보다 더 효과적이었다. 또한 sucrose 농도별 실험에서는 $28^{\circ}C$에서 40 g/L를 첨가하는 것이 좋았다.

• 대한기관식도과학회지
• /
• 제6권2호
• /
• pp.164-171
• /
• 2000

Background and Objectives： Necrotizing lymphadenitis or Kikuchi's disease is characterized by cervical lymphadenopathy of unknown etiology with unique histologic findings in young female patients. The importance of this disease lies in the fact that it can be easily misdiagnosed as malignant lymphoma, hence, clinicians need to aware of this disease entity. The purpose of this study is to report the clinicopathologic findings, radiographic findings, and many laboratory tests in order to contribute to the diagnosis and treatment of necrotizing lymphadenitis. Materials and Methods： We evaluated 31 patients, who were diagnosed as necrotizing lymphadenitis by excisional biopsy or fine needle aspiration cytology or ultrasound guided 18G cutting needle biopsy, retrospectively. Result : The median age was 24.8 years (range 12 to 43 years) and the male to female ratio was 1 : 2.4(9：22), with 14 females (45.1%) under 30 years. The common chief complaints were neck mass, easy fatigue and fever. Lymph node enlargement was limited to the cervical area in most cases (28cases : 90.3%). The involved lymph nodes were usually multiple (20cases : 64.5%), unilateral (26cases 83.9%) and small sized. Leukopenia (19cases : 61.3%) and elevation of ESR (18cases : 58.1%) appeared most frequently in the abnormal laboratory data. These symptoms will be gone spontaneoulsy without any specific treatment in several weeks or months. Conclusion : We should consider open biopsy or fine needle aspiration cytology or ultrasound guided cutting needle biopsy with lymph node in patients who have cervical lymphadenopathy with easy fatigue and fever, especially young women to exclude other conditions such as malignant lymphoma and tuberculosis, etc.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.104-111
• /
• 2008

The objective of this study is to evaluate micro end-milling characteristics and tool wear behavior of AlN-hBN composites. First, AlN based composites with hBN contents in the range of 10 to 20vol% were prepared by hot-pressing. Vickers hardness and flexural strength of the prepared composite specimens were measured and compared according to the vol% of hBN variations. Then, cutting force variations were measured and analyzed using a tool dynamometer during the micro end-milling experiments; and machined surface shapes and roughness were investigated using a 3D non-contact type surface profiler. After micro end-milling, worn tools were investigated using a tool microscope and SEM images. From the experimental results, it can be observed that the cutting forces decreased, and surface qualities were improved with increasing hBN contents. At low content of hBN, tool chipping was observed; and tool wear rate decreased with increasing hBN contents. The results of this study insist that proper machining conditions, including tool wear behavior investigation, should be determined for the micro end-milling of AlN-hBN composites for its further application.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.373-379
• /
• 2010

This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a $35^{\circ}$ of tilted angle and $90^{\circ}$ of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.

• 한국잠사곤충학회지
• /
• 제40권1호
• /
• pp.8-12
• /
• 1998

The study aimed at development of a riding-type mulberry harvester for mechanical harvest. A riding-type mulberry harvester has been developed to harvest on sloped land with a higher efficiency. It has been implemented over a period of 2 years from 1996 to 1997. The result is as follows. It moves on carterpillar with a level adjusting system. It reduced only from 14.6 hrs to 0.9hrs/10a for cutting in a range of 25 to 80 cm high and possibly used for both spring and autumn. It reduced only the labor requirements of mulberry harvesting by 94 percent, as compared to that of the manual harvest. All related processes, cutting, binding and loading are simultaneously done by this harvester and totally it can reduce 96 percent of the labor requirements, as compared to 20.4 hrs/10a of the manual harvest. The machine compared to improved mulberry harvest efficiency with 11.11a per hour by about 23 times as compared to 0.49a per hour manpower. Cost analysis indicated that the riding-type mulberry harvester saved overall cost by 66 percent from 980,000 won per ha manpower to 330,000 won per ha.

• 대한산업공학회지
• /
• 제30권2호
• /
• pp.93-106
• /
• 2004

This paper studied a maximal covering location problem with cost restrictions, to maximize level of service within predetermined cost. It is assumed that all demand have to be met. If the demand node is located within a given range, then its demand is assumed to be covered, but if it is not, then its demand is assumed to be uncovered. An uncovered demand is received a service but at an unsatisfactory level. The objective function is to maximize the sum of covered demand, Two heuristics based on the Lagrangean relaxation of allocation and decoupling are presented and tested. Upper bounds are found through a subgradient optimization and lower bounds are by a cutting algorithm suggested in this paper. The cutting algorithm enables the Lagrangean relaxation to be proceeded continually by allowing infeasible solution temporarily when the feasible solution is not easy to find through iterations. The performances are evaluated through computational experiments. It is shown that both heuristics are able to find the optimal solution in a relatively short computational time for the most instances, and that decoupling relaxation outperformed allocation relaxation.