Browse > Article

Experimental Investigations on Micro End-milling Cutting Characteristics Comparison and Tool Wear Behavior of AlN-hBN Composites Sintered by Hot-pressing  

Beck, Si-Young (인하대학교 기계공학과 대학원)
Shin, Bong-Cheol (인하대학교 기계공학과)
Cho, Myeong-Woo (인하대학교 기계공학부)
Cho, Won-Seung (인하대학교 신소재공학부)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.17, no.4, 2008 , pp. 104-111 More about this Journal
Abstract
The objective of this study is to evaluate micro end-milling characteristics and tool wear behavior of AlN-hBN composites. First, AlN based composites with hBN contents in the range of 10 to 20vol% were prepared by hot-pressing. Vickers hardness and flexural strength of the prepared composite specimens were measured and compared according to the vol% of hBN variations. Then, cutting force variations were measured and analyzed using a tool dynamometer during the micro end-milling experiments; and machined surface shapes and roughness were investigated using a 3D non-contact type surface profiler. After micro end-milling, worn tools were investigated using a tool microscope and SEM images. From the experimental results, it can be observed that the cutting forces decreased, and surface qualities were improved with increasing hBN contents. At low content of hBN, tool chipping was observed; and tool wear rate decreased with increasing hBN contents. The results of this study insist that proper machining conditions, including tool wear behavior investigation, should be determined for the micro end-milling of AlN-hBN composites for its further application.
Keywords
AlN-hBN composites; Machinable ceramics; Machinability evaluation; Micro end-milling; Micro tool wear;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Zhao, H., Wang, W., Fu, Z., and Wang, H., 2008, "Thermal conductivity and dielectric property of hotpressing sintered AIN-BN ceramic composites," Ceram. Int., viewed 20 January 2008,
2 Lai, X., Li, H., Li, C., Lin, Z., and Ni, J., 2008, "Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minium chip thickness," Int. J. Mach. Tools & Manuf., Vol. 48, pp. 1-14   DOI   ScienceOn
3 Gam, J. S., Ha, J. S., Cheong, D. S. and Han, K. S., 1994, "Machinability and Strength of AlN-BN Ceramics," J. Kor. Ceram. Soc., Vol. 31, No. 2, pp. 177-184   과학기술학회마을
4 Cao, Y., 2001, "Failure analysis of exit edges in ceramic machining using finite element analysis," Engineering Failure Analysis, Vol. 8, pp. 325-338   DOI   ScienceOn
5 Cho, M. W., Kim, D. W., and Cho, W. S., 2007, "Analysis of micro-machining characteristics of $Si_3N_4$-hBN composites," Journal of European Ceramic Society, Vol. 27, pp. 1259-1265   DOI   ScienceOn
6 Tajika, M., Rafaniello, W., and Niihara, K., 2000, "Sintering behavior of direct nitride AlN powder," Materials Letters, Vol. 46, pp. 98-104   DOI   ScienceOn
7 Park, D. S., Cho, M. W., Kim, D. W., and Cho, W. S., 2004, "Micro-Pattern Machining Characteristics Evaluation of $Si_3N_4$-hBN based Machinable Ceramics Using Powder Blasting Process," Trans. of KSMTE., Vol. 13, No. 2, pp. 33-39
8 Werdecker, W. and Aldinger, F., 1984, "Aluminum Nitride-An Alternative Ceramic Substrate for High Powder Application in Microcircuits," IEEE Trans. Components Hybrids Manuf. Technol., Vol. CHMT-7, No. 4, pp. 399-404
9 Jang, S. M. and Cho, M. W., 2004, "Surface Properties and Tool Wear of $Si_3N_4$-hBN Machinable Ceramics in Endmill Machining using Tungsten Carbide Tool," J. Kor. Soci. Manuf. Pro. Eng., Vol. 3, No. 1, pp. 15-21
10 Cho, M. W., Kim, D. W., Cho., W. S., Park, D, S., and Lee, J., 2007, "Micro Groove Machining Characteristics of $Si_3N_4-hBN$ Composites," Key Engineering Materials, Vol. 336-338, pp. 1461-1464   DOI
11 Beck, S. Y., Cho, M. W., and Cho, W. S., 2008, "Mechanical Properties and End-milling Characteristic of AlN-hBN Based Machinable Ceramics," J. Kor. Ceram. Soc., Vol. 45, No. 1, pp. 75-81   과학기술학회마을   DOI
12 Cho,W. S., Piao, Z. H., Yoo, Y. C., Lee, T. C., Cho, M. W., Hong, Y. C., Park, K., and Hwang, W.S., 2007, "Microstructure and mechanical properties of AlN-hBN based machinable ceramics prepared by pressureless sintering," J. Europ. Ceram. Soc., Vol. 27, pp. 1425-1430   DOI   ScienceOn