• Transactions of Materials Processing
• /
• v.14 no.1 s.73
• /
• pp.57-64
• /
• 2005

This study deals with the cold forging process design for shaft in the main part of automobile motors with rectangular deep groove. In forging process, the accuracy and die lift is very important because it have influence on reduction of the production cost and the increase of the production rate. Therefore, it is necessary to develop the manufacturing process of shaft by cold forging., process variables are the cropped face angle of billet and the eccentric load of punch. The former is derived from cropping test, the latter is occurred by clearance between container and preform. Also, grooved preform select the process variable for decrease in punch deflection. We investigate that a deflection of punch and a deformation of preform to every process variables. Through this investigation, we suggest the optimal preform and process design, expect to be improved the tool life in forging process.

• Journal of The Korean Association For Science Education
• /
• v.27 no.8
• /
• pp.724-742
• /
• 2007

The purpose of this study was to develop a scientific inquiry model that makes scientific inquiry accessible to science teachers as well as students. To develop a scientific inquiry model, we investigated the research process demonstrated by ten scientists who were working at academic research institutions or industrial research institutions. We collected data through scientists' journal articles, lab meetings and seminars, and observation of their inquiry process. After we analyzed the scientists' inquiry strategies and processes of inquiry, we finally developed the Scientist's Methodology of Investigation Process model named SMIP. The SMIP model consists of four domains, 15 stages, and link questions, such as "if, why", and "how". The SMIP model stressed that inquiry process is a selective process rather than a linear or a circular process. Overall, these findings can have implication science educators in their attempt to design instruction to improve the scientific inquiry process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1687-1692
• /
• 2009

Cyber forensics is used the process and technology of digital forensics as a criminal investigation in cyber space. Cyber crime is classified into cyber terror and general cyber crime, and those two classes are connected with each other. The investigation of cyber terror requires high technology, system environment and experts, and general cyber crime is connected with general crime by evidence from digital data in cyber space. Accordingly, it is difficult to determine relational crime types, collect evidence and the legal admissibility of evidence. Therefore, we considered the classifications of cyber crime, the collection of evidence in cyber space and the application of laws to cyber crime. In order to efficiently investigate cyber crime, it is necessary to integrate those concepts for each cyber crime-case. In this paper, we constructed a cyber forensics domain ontology for cyber criminal investigation using the concepts, relations and properties, according to categories of cyber crime, laws, evidence, and information of criminals and crime-cases. This ontology can be used in the process of investigating of cyber crime-cases, and for data mining of cyber crime; classification, clustering, association and detection of crime types, crime cases, evidences and criminals.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.113-124
• /
• 2005

The work of investigation in the laboratory medicine includes various kinds of investigations and microbes and it is too complicated to draw needed results in time. So, we aim to improve work performance of the laboratory medicine. For this study, we implemented the scheduling system in microbe investigation using agent environment and the workflow management system to manage the schedule of investigation, and the query system to check the schedule. And preliminary report and final report of microbe investigation can be announced automatically using agent. The scheduling system implemented could identify the lack or waste of resources and thus enable efficient management and distribution of resources. The query system could check the schedule and retrieve the Processing status in short time, enabled the automated report, and reduced possible interrupts and the delay of work that can be occurred in confirming process. It also enables users to access from local and remote sites. Also, this system can reduce the conflicts among People that may occur in unexpected situations because it enables doctors to confirm those situations such as the malfunction of instrument and the lack of agar or reagent, and the efficiency of work process can be expected.

• Tunnel and Underground Space
• /
• v.30 no.2
• /
• pp.136-148
• /
• 2020

Nuclear power plants have been operated in Korea since 1978, thus the high-level radioactive waste (HLW) produced from the plants has been accumulated accordingly. Hence, it is urgent to secure a final repository for HLW disposal, however, siting process should be preceded, which usually takes long time, as it requires broad and precise investigation. The investigation is generally carried out in stages, which consists of multidisciplinary approaches. In this study, the case studies mainly pertaining to rock mechanics were conducted. Rock mechanical aspects required in each stage and their applications were investigated and corresponding R&D researches were presented as well. At the same time, current research status in Korea was presented, followed by a brief future research plan with regard to the site investigation. The future research aims to produce fundamental information for siting process, and the compiled cases in this study will be utilized as references in the research.

• Education of Primary School Mathematics
• /
• v.15 no.2
• /
• pp.91-106
• /
• 2012

This study reports pre-service teachers' problem solving process on the problem-based learning(PBL) employed in an elementary mathematics method course. The subjects were 6 pre-service teachers(students). The data were collected from classroom observation. The research results were described by problem solving stages. In understanding the problem stage, students identified what problem stand for and made a problem solving planned sheet. In curriculum investigation stage, students went through investigation and re-investigation process for solving the task. In problem solving stage, students selected the best strategy for solving the task and presented and shared about problem solving results.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.4-23
• /
• 2020

In this article, the excavation and research of cultural assets were set as a process and the improvement measures were considered. To this end, we examined the process of excavating cultural assets to diagnose problems, suggested changes in the format of reports and the establishment of a database, and drew up improvement models for Silla's ancient tombs and research. The problems of the current process of excavating cultural assets are as follows. First, investigation and research fail to integrate and merely comprise 'examination as an administrative procedure' or 'investigation for the sake of investigation', which ultimately hamper research and achievement. Second, there are differences in the composition or description of the report by surveyors or excavation agencies, which make it difficult to integrate data at a higher level. Third, the current form of reporting remains in analog format such as books and PDFs, which not only reduces continuity and efficiency to the research phase, but also lags behind the rapidly changing times. We believe that the improvement of these problems should be achieved by computerizing reports, converting them into digital formats, and establishing them in a database. First, regarding the transition to report format, it was pointed out that the form of excavation data, the final stage of the excavation process, remains analog and the improvement model was presented from the perspective of linking it to excavation and research, and the justification was emphasized through comparison with other cases. Second, the database reviewed the build model for Silla tombs. To this end, the purpose and expected effects, targets, progress, attributes, categories, and interfaces were examined.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.spc
• /
• pp.9-17
• /
• 2010

Polymorphism has been recognized to be a critical issue throughout the drug product development process. Most of solid phase drugs have polymorphism, which has generated a great deal of interest and the field has been evolving rapidly. Preferably, thermodynamically most stable form of a drug substance is selected to obtain consistent bioavailability over its shelf life and various storage conditions. Moreover, it has the lowest potential for conversion from one polymorphic form to another. However, metastable or amorphous forms may be used intentionally to induce faster dissolution rate for rapid drug absorption and higher efficacy. For pharmaceutical industry, polymorphism is one of the key activities in form selection process together with salt selection. This article introduces the main features in the investigation of solid form selection especially polymorphic behavior with thermodynamic backgrounds, physicochemical properties with solubility, dissolution, and mechanical properties, and characterization techniques for proper analysis. The final form can be recommended based on the physicochemical and biopharmaceutical properties and by the processability, scalability and safety considerations. Pharmaceutical scientists especially in charge of formulation need to be well aware of the above issues to assure product quality.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.723-734
• /
• 2010

With a belief of high water quality production and less chemical usage, membrane technology including Microfiltration (MF), Ultrafiltration (UF), and Nanofiltration(NF) is being employed more and more in drinking water treatment process. However, due to higher energy consumption of UF and NF, MF is normally used for drinking water treatment especially in a plant of large scale. In this investigation, performance ofsand filtration and membrane filtration was compared regarding removal of various water quality parameters, such as TOC, DOC, KMnO4 consumption, THMFP, and HAAFP. Two lines of pilot plant have been operated, one of which line is a traditional advanced water treatment process which includes sedimentation, sand filtration, ozonation, and activated carbon, and the other line is an alternative treatment process which includes sedimentation with inclined plate, MF membrane, ozonation, and activated carbon. For the first about 4months of period, MF filtration showed similar or little bit higher performance than sand filtration. However, after about 4month later, sand filtration showed much higher performance in removing all parameters monitored in the investigation. It was found that sand filtration is a better option than MF filtration as far as microbial community is fully activated in sand filter bed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.91-94
• /
• 2006

In this paper, in order to get micro or nano size optical patterns, an analytical and experimental investigation on a LGP (light guide plate) injection molding process has performed. The LGP, which diffusing and emitting the light from the CCFL or the LEDs to the panel front direction uniformly, typically has an under 1mm thick base substrate and numerous 60 to $170{\mu}m$ width and 6 to $10{\mu}m$ thick dot patterns on it. Generally, the small size LGPs, for mobile devices, have been and are being made of PMMA through the injection molding process. However, the substrate thickness and the dot pattern size are decreasing, it becomes hard to fill the micro to sub-micro cavities completely. To investigate the flow behavior of resin in micro/nano cavities and identify the characteristics of the LGP injection molding process, we carried out the flow analyses with respect to the variations of the substrate thickness, the dot pattern size and the pitch of a cavity.