References
- G. C. Wang, G. Q. Zhao, X. H. Huang, Y. X. Jia, 2002, Analysis and design of a new manufacturing process for a support shaft using the finite element method, J. Mater. Process. Technol., Vol. 121, pp. 259-264
- N. S. Kim, S. Kobayashi, 1990, Preform Design in H-Shaped Cross Sectional Axisymmetric Forging by the Finite Element Method, Int. J. Mech. Manuf, Vol. 30, No. 2, pp. 243-265 https://doi.org/10.1016/0890-6955(90)90134-5
- J. H. Lee, T. H. Kim, B. M. Kim, 1998, Design Methodology of Preform for Reducing Tool Wear in cold Forging, J. of the Korean Society of Precision Engineering, Vol. 15, No. 4, pp. 118-125
- M. Shiome, J. H. Xu, K. Mori, K. Osakada, 1996, Three-Dimensional Finite Element Simulation of Buckling Behavior of Slab in Width-sizing Process, Advanced Technology of Plasticity, pp. 355-358
- T. Kato, Y. Tozawa, K. Nakanishi, T. Kawabe, 1986, Prediction of dimensional Accuracy of Cold Extruded Can During Repeating Operation, Annals of the CIRP, Vol. 35, No. 1, pp. 177-180 https://doi.org/10.1016/S0007-8506(07)61865-4
- K. Imai, 1981, Effects of Punch Velocity on the Preciseness of Backward-Extruded Cups, J. JSTP, Vol. 22, No. 241, pp. 185-190
- K. Imai, 1975, Effects of Unsteady Deformation on Inner and Outer Diameters of Backward Extruded Cups, J. JSTP, Vol. 16, No. 178, pp. 1065-1072
- Meisenbach Gmbh and Bamberg, 1992, Cropping of steel bar-its mechanism and practice, International Cold Forging Group
- I. Pillinger, P. Hartley, C.E.N. Sturgess, G. W. Rowe, 1985, An elastic-plastic three-dimensional finite element analysis of the upsetting of rectangular blocks and experimental comparison, Int. U. Mach. Tool. Des. Res., Vol. 25, p. 229 https://doi.org/10.1016/0020-7357(85)90003-4
- Massao Murakawa, 1992, Building a Prototype Cropping Tester of Circular Bars and Several Test Results Obtained, J. JSTP, Vol. 33, No.374
- Scientific Technologies Corporation, 1995, DEFORM User's Manual V4.1
- 김동진, 김병민, 1999, 이중 리브를 가진 냉간압출품의 내.외부 결함 방지를 위한 공정설계. 한국소성가공학회, 제 8 권 제 6 호, pp. 612-619