• 제목/요약/키워드: Power Shift

검색결과 1,057건 처리시간 0.028초

고정 위상 동작 인버터를 포함하는 위상천이 풀 브리지 DC/DC 컨버터 (Phase-Shift Full-Bridge DC/DC Converter with Fixed-Phase Operation Inverter)

  • 김진호;박재성;김홍권;박준우;신용생;지상근;조상호;노정욱;홍성수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 전력전자학술대회 논문집
    • /
    • pp.335-336
    • /
    • 2012
  • 본 논문에서는 출력 인덕터 전류의 리플을 저감할 수 있는 새로운 방식의 위상천이 풀 브리지 컨버터를 제안한다. 제안된 회로는 2개의 풀 브리지 인버터가 연결된 구조로 되어 있으며 하나의 풀 브리지 인버터가 고정 위상($0^{\circ}$)으로 동작할 때, 다른 풀 브리지 인버터의 위상을 조절하여 출력 전압을 제어하는 방식이다. 정상 동작 시, 제안회로는 기존 위상천이 풀 브리지 컨버터에 비해 출력 인덕터 전류 리플이 매우 작고, 2차 측 정류기의 공진 전압도 작아져 출력 LC 필터의 소형화 및 고효율화가 가능하여 대전류 사양에 매우 적합한 장점을 갖는다. 본 논문에서는 제안된 회로의 이론적인 특성을 분석하고, 450W 전원장치를 시작품으로 제작하여 그 우수성을 확인하였다.

  • PDF

Ringing Frequency Extraction Method Based on EMD and FFT for Health Monitoring of Power Transistors

  • Ren, Lei;Gong, Chunying
    • Journal of Power Electronics
    • /
    • 제19권1호
    • /
    • pp.307-315
    • /
    • 2019
  • Condition monitoring has been recognized as an effective and low-cost method to enhance the reliability and improve the maintainability of power electronic converters. In power electronic converters, high-frequency oscillation occurs during the switching transients of power transistors, which is known as ringing. The ringing frequency mainly depends on the values of the parasitic capacitance and stray inductance in the oscillation loop. Although circuit stray inductance is an important factor that leads to the ringing, it does not change with transistor aging. A shift in either the inside inductance or junction capacitance is an important failure precursor for power transistors. Therefore, ringing frequency can be used to monitor the health of power transistors. However, the switching actions of power transistors usually result in a dynamic behavior that can generate oscillation signals mixed with background noise, which makes it hard to directly extract the ringing frequency. A frequency extraction method based on empirical mode decomposition (EMD) and Fast Fourier transformation (FFT) is proposed in this paper. The proposed method is simple and has a high precision. Simulation results are given to verify the ringing analysis and experimental results are given to verify the effectiveness of the proposed method.

Nuclear power in jeopardy: The negative relationships between greenhouse gas/fine dust concerns and nuclear power acceptance in South Korea

  • Lee, Jin Won;Roh, Seungkook
    • Nuclear Engineering and Technology
    • /
    • 제54권10호
    • /
    • pp.3695-3702
    • /
    • 2022
  • South Korea, a country that built a world-class nuclear power infrastructure, shifted to a nuclear phaseout during the previous government's reign. This shift was pursued as part of a larger task of electricity mix reform, and one of the integral motives for such reform is addressing greenhouse gas (GHG) and fine dust problems. Thus, verifying the relationships between the public's concerns about GHG/fine dust and their acceptance of nuclear power generation is essential for designing public communication strategies to revive nuclear power under the ongoing environmental regime. Our analysis using a nationwide survey sample of South Korea (N = 1009, through proportionated quota sampling method) showed that the more people are concerned about GHG and fine dust, the less they accept nuclear power. These relationships held even after controlling for the effect of a third variable-energy-related environmentalism. This finding means that despite past communication efforts positioning nuclear power as a generation source that can mitigate GHG/fine dust emissions and the widely accepted scientific evidence that supports such positioning, nuclear power in Korea is in jeopardy. Our finding provides implications for public communications and fundamental knowledge for research on the determinants of nuclear power acceptance.

저전압/저전력 고성능 배럴 쉬프터의 설계 (Design of Low Voltage/Low Power High performance Barrel Shifter)

  • 조훈식;손일헌
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 추계종합학술대회 논문집
    • /
    • pp.1093-1096
    • /
    • 1998
  • The architecture and circuit design of low voltage, high performance barrel shifter is proposed in this paper. The proposed architecture consists of two arrays for byte and bit rotate/shift to perform 32-bit operation and is preferred for even bigger data length as it can be adapted for 64-bit extention with no increase of number of stages. NORA logic structure was used for circuit implementation to achieve the best performance in terms of speed, power and area. The complicated cloking control has been resolved with the ingenious design of clock dirver. The circuit simulation results in 3.05ns delay, 9.37㎽ power consumption at 1V, 160MHz operation when its implemented in low power $0.5\mu\textrm{m}$ CMOS technology.

  • PDF

소프트 스위칭 방식을 이용한 X-Ray용 DC-DC Converter에 관한 연구 (A Study on DC-DC Converter for X-Ray Using Soft-Switching Method)

  • 김학성;김현준;원충연;유동욱;하성운
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 A
    • /
    • pp.379-381
    • /
    • 1994
  • This paper is concerned with a zero-voltage soft-switching PWM DC-DC high-pelter converter using IGBTs, which Bakes the most of the parastic LC parameters of high-voltage transformer link, for diagnostic X-Ray power generator. The converter circuit basically utilizes phase-shift pulse width modulated series resonant full-bridge PWM DC-DC high-Power converter operating at a constant frequency:20kHz. This technique brings about dramatic decreases in the switching losses of power devices and their electrical stresses as compared with the commonly-used hard-switching PWM DC-DC power converter. The high-frequency switching operation of the converters has some effective advantages, which consist in the physical reduction in size and weight and lowered acoustic noise.

  • PDF

Group Building Based Power Consumption Scheduling for the Electricity Cost Minimization with Peak Load Reduction

  • Oh, Eunsung;Park, Jong-Bae;Son, Sung-Yong
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권6호
    • /
    • pp.1843-1850
    • /
    • 2014
  • In this paper, we investigate a group building based power consumption scheduling to minimize the electricity cost. We consider the demand shift to reduce the peak load and suggest the compensation function reflecting the relationship between the change of the building demand and the occupants' comfort. Using that, the electricity cost minimization problem satisfied the convexity is formulated, and the optimal power consumption scheduling algorithm is proposed based on the iterative method. Extensive simulations show that the proposed algorithm achieves the group management gain compared to the individual building operation by increasing the degree of freedom for the operation.

Maintenance Staff Scheduling at Afam Power Station

  • Alfares, H.K.;Lilly, M.T.;Emovon, I.
    • Industrial Engineering and Management Systems
    • /
    • 제6권1호
    • /
    • pp.22-27
    • /
    • 2007
  • This paper describes the optimization of maintenance workforce scheduling at Afam power station in Nigeria. The objective is to determine the optimum schedule to satisfy growing maintenance labour requirements with minimum cost and highest efficiency. Three alternative maintenance workforce schedules are compared. The first alternative is to continue with the traditional five-day workweek schedule currently being practiced by Afam power station maintenance line. The second alternative is to switch to a seven-day workweek schedule for the morning shift only. The third alternative is to use a seven-day workweek schedule for all three work shifts. The third alternative is chosen, as it is expected to save 11% of the maintenance labour cost.

플라이휠 저장에너지 UPS의 성능 시험을 위한 순간정전 및 전압불평형 발생기 (Outage and Voltage Unbalance Generator for the Test of Flywheel Energy Storage UPS)

  • 김중원;이기수;변우열;노의철;김인동;전태원;김흥근
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 전력전자학술대회 논문집(2)
    • /
    • pp.570-574
    • /
    • 2004
  • This paper deals with a novel 3-phase power quality disturbance generator. The proposed generator can be applied to the performance that of custom power devices. Voltage sag, swell, outage unbalance and phase shift are provided by the generator. The control scheme for the disturbance generation is simple, and hardware setup is cost effective compared with conventional scheme. The operating principle of the generator is described and the usefulness verified through simulation with 10kVA power rating.

  • PDF

Power-flow에 독립적인 파워트레인 모델링 (Power-flow Independent Modeling of Vehicle Powertrain)

  • 최기영;이승종
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.267-270
    • /
    • 2001
  • A lot of efforts have been made to analyze the performance of the vehicle equipped with automatic transmission through simulation. It might be necessary to understand the different types of transmissions, i.e., different power flows, for different models. If there is a module that can be applied to different types of automatic transmission, it could be helpful to transmission-related engineers. This study has started up from this idea. The common bond graph has been obtained from several types of the automatic transmission. The overall generalized equations and kinematic constraint equations have been derived using virtual power sources on common bond graph. They are used to derive state equations and constraints. These equations have been applied as an application to the vehicle equipped with two simple planetary gear set type of Ravigneaux gear type automatic transmission. The state equation, kinematic constraints, and dynamic constraints have been derived in every gear and shift operation using overall generalized equations and kinematic constraint equations. Simulations for constraint speed running, standing-start running, rolling-start running, and LA-4 mode have been conducted to analyze the performance of the vehicle powertrain using GVPS(Generalized Vehicle Powertrain Simulation) program wit pull down menus.

  • PDF

전력 Switching 소자를 압전트랜스로 구동하는 방법 (The Driving Method of Power Switching Device Using Pizoelectric Transformer)

  • 황민규;이상균;이재춘;최준영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 D
    • /
    • pp.1324-1326
    • /
    • 1998
  • To drive motor or heating machine, it needs the electric power system like the apparatus of inverter. This electric power system obviously comprises power switching devices and drivers to run them. And this system has the topology comprised one/many arm(s), - each arm has high side switching device and low side switching device. Transformer, photocoupler, and HVIC having functions of isolation and level shift which are important thing to drive high side switching device are used as component of drivers in conventional apparatus. Piezoelectric transformers are proposed in this paper, and applied to drive high side swiching device. Through experiments, the possiblities of driving high side switching device are presented and the problems are mooted concurrently. But, we also consider a counterplan for solving the mooted trouble issues.

  • PDF