• Applied Science and Convergence Technology
• /
• 제25권6호
• /
• pp.158-161
• /
• 2016

Debye temperature is an important thermodynamical factor in quantum dots (QDs); it can be used to determine the degree of homogeneity of a QD structure as well as to study the interdiffusion mechanism during growth. Direct estimation of the Debye temperature can be obtained using the Varshni relation. The Varshni relation is an empirical formula that can interpret the change of emission energy with temperature as a result of phonon interaction. On the other hand, phonons energy can be calculated using the Fan Expression. The Fan expression and Varshni relation are considered equivalent at a temperature higher than Debye temperature for InAs quantum dot. We investigated InAs quantum dot optically, the photoluminescence spectra and peak position dependency on temperature has been discussed. We applied a mathematical treatment using Fan expression, and the Varshni relation to obtain the Debye temperature and the phonon energy for InAs quantum dots sample. Debye temperature increase about double compared to bulk crystal. We concluded that the In/Ga interdiffusion during growth played a major role in altering the quantum dot thermodynamical parameters.

• Journal of Mechanical Science and Technology
• /
• 제20권8호
• /
• pp.1292-1301
• /
• 2006

This article investigates numerically the carrier-phonon interactions in thin gallium arsenide (GaAs) film structures irradiated by subpicosecond laser pulses to figure out the role of several recombination processes on the energy transport during laser pulses and to examine the effects of laser fluences and pulses on non-equilibrium energy transfer characteristics in thin film structures. The self-consistent hydrodynamic equations derived from the Boltzmann transport equations are established for carriers and two different types of phonons, i.e., acoustic phonons and longitudinal optical (LO) phonons. From the results, it is found that the two-peak structure of carrier temperatures depends mainly on the pulse durations, laser fluences, and nonradiative recombination processes, two different phonons are in nonequilibrium state within such lagging times, and this lagging effect can be neglected for longer pulses. Finally, at the initial stage of laser irradiation, SRH recombination rates increases sufficiently because the abrupt increase in carrier number density no longer permits Auger recombination to be activated. For thin GaAs film structures, it is thus seen that Auger recombination is negligible even at high temperature during laser irradiation.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권7호
• /
• pp.706-712
• /
• 1997

AlN(Aluminium Nitride) thin films were prepared using by RF sputtering method on the Si(100) and Si(111) substrates as the parameters of the substrate temperature, RF power, sputtering duration and the $N_2$/Ar ratio and investigated by X-ray diffraction, IR spectrometry, n&k analyzer. For the Si(100) substrate, the AlN thin films of (101) orientation were obtained under the conditions of room temperature and the nitrogen of 60 vol.%. For the Si(111) substrate, the (002) AlN thin films were obtained under the nitrogen of 100 vol.%. In case of the thin film prepared in the condition of above 60 vol.% of the nitrogen, the average value of the surface roughness of the film was 151$\AA$. From the changes of the half widths of E$_1$[TO] phonon bands at the wavenumber of 680$cm^{-1}$ /, it were compared of the crystallinities of the films which were grown under the different conditions. The thicknesses of AlN films were decreased dramatically in the region of the nitrogen of 40~60 vol.%. Its due to the nitridation of the Al target surface and getting low of the sputtering yield by the $N_2$/Ar ratio being increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.50-53
• /
• 1992

The GaP crystals are growth by Synthesis Solute Diffusion(SSD) method and its properties are investigated. Etch pits density along vertical direction of ingot is increased from 3.8${\times}$10$^4$cm$\^$-2/ of first freeze to 2.3${\times}$10$\^$5/cm$\^$-2/ of last freeze part. The carrier concentration and mobilities are measured to 197.49$\textrm{cm}^2$/V. sec and 6.75${\times}$10$\^$15/cm$\^$-3/ at room temperature. The temperature dependence of optical energy gap is empilically fitted to E$\_$g/(T)=2.3383-(6.082${\times}$10$\^$-4/T${\times}$/(373.096+T)[eV]. Photo-luminescence spectra measured at low temperature are consist with sharp line-spectra near band-gap energy and radiative recombination between shallow Si-donor to Zn-acceptor and its phonon reprica, and broad emission. The infrared absorption in GaP is cause to phonon coupling modes of TO, LO, LA, TA$_1$, TA$_2$and vibration modes of Ga$_2$O, Si-donor and Zn-acceptor, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.357-358
• /
• 2007

Raman spectra of poly (polycrystalline) 3C-SiC thin films, which were deposited on the oxidized Si substrate by APCVD, have been measured. They were used to study the mechanical characteristics of poly 3C-SiC grown in various temperatures. TO and LO modes of 2.0 m poly 3C-SiC grown at 1180 C occurred at 794.4 and $965.7\;cm^{-1}$. Their FWHMs (full width half maximum) were used to investigate the stress and the disorder of 3C-SiC. The broad FWHM can explain that the crystallinity of 3C-SiC grown at 1180 C becomes poly crystalline instead of the disordered crystal. The ratio of intensity $I_{(LO)}/I_{(TO)}$ 1.0 means that the crystal defect of 3C-SiC/$SiO_2$/Si is small. The biaxial stress of poly 3C-SiC was obtained as 428 MPa. In the interface of 3C-SiC/$SiO_2$, the phonon mode of C-O bonding appeared at $1122.6\;cm^{-1}$. The phonon modes related to D and G bands of C-C bonding were measured at 1355.8 and $1596.8\;cm^{-1}$ respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.69-69
• /
• 2010

The research is the structural and optical characteristics of the Cadmium Sulfide(CdS) film, nanowires and nanobelts grown on the $Al_2O_3$ substrate using the vapor phase epitaxy method. The field-emission scanning electron microscopy(FE-SEM) were used to identify the shape of the surface of the nanostructures and x-ray diffraction(XRD) and transmission electron microscopy (TEM) were used to evaluate the structural characterisitcs. As a result, the XRD was confirmed the CdS peak and the substrate peak and TEM showed single crystals with wurtzite hexagonal structure on the nanostructures. As for the optical characteristic of the nanostructures, photoluminescence(PL) and micro-raman spectrum were measured. The PL measurements confirmed the emission peak related bound exciton to neutral donor($D^0X$) peak and free exciton(FX) peak. The micro-raman spectrum showed that the peak of the nanostructures were similar to the pure crystalline CdS peak and each peak were overtone of LO phonon of the hexagonal CdS of the longitudinal optical(LO) phonon mode. Therefore, it is confirmed that the CdS nanostructures grown in this research have superior crystallinity.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.582-588
• /
• 2019

FeVSb1-xTex (0.02 ≤ x ≤ 0.10) half-Heusler alloys were fabricated by mechanical alloying process and subsequent vacuum hot pressing. Near single half-Heusler phases are formed in vacuum hot pressed samples but a second phase of FeSb2 couldn't be avoided. After doping, the lattice thermal conductivity in the system was shown to decrease with increasing Te concentration and with increasing temperature. The lowest thermal conductivity was achieved for FeVSb0.94Te0.06 sample at about 657 K. This considerable reduction of thermal conductivities is attributed to the increased phonon scattering enhanced by defect structure, which is formed by doping of Te at Sb site. The phonon scattering might also increase at grain boundaries due to the formation of fine grain structure. The Seebeck coefficient increased considerably as well, consequently optimizing the thermoelectric figure of merit to a peak value of ~0.24 for FeVSb0.94Te0.06. Thermoelectric properties of various Te concentrations were investigated in the temperature range of around 300~973 K.

• 한국진공학회지
• /
• 제17권1호
• /
• pp.51-57
• /
• 2008

나노크기의 Au-Si을 촉매로 급속열화학기상증착(rapid thermal chemical vapor deposition)법을 이용하여 Si(111) 기판에 성장한 Si 나노선의 구조적인 형태 변화와 광학적 특성을 연구하였다. 기상-액상-고상(vapor-liquid-solid) 성장법에 의한 Si 나노선 형성 과정에서 액상 입자인 Au-Si 나노점은 나노선 성장온도에서 촉매로 사용되었다. 이 액상 나노점이 형성된 Si 기판에 1.0Torr 압력과 $500-600^{\circ}C$ 기판 온도 하에서 $SiH_4$와 $H_2$의 혼합가스를 공급하여 Si 나노선을 형성하였다. Si 나노선 성장 후 형태를 전계방출 주사전자현미경(Field Emission Scanning Electron Microscope)으로 관찰한 결과, 대부분의 나노선이 균일한 크기로 기판 표면에 수직하게 <111> 방향으로 정렬된 것을 확인하였다. 형성된 나노선의 크기는 평균 직경이 ${\sim}60nm$이고 평균 길이가 ${\sim}5um$임을 확인하였다. 또한 고 분해능 투과전자현미경(High Resolution-Transmission Electron Microscope) 관찰을 통해 Si 나노선은 약 3nm의 비정질 산화층으로 둘러 싸여 있는 Si 단결정임이 분석되었다. 그리고 마이크로 라만 분광(Micro-Raman Scattering)법을 통한 광학적 특성 분석 결과, Si의 광학 포논(Optical Phonon) 신호 위치가 Si 나노선 구조의 영향으로 낮은 에너지 쪽으로 이동하며, Si 포논 신호의 폭이 비대칭적으로 증가함을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제41권10호
• /
• pp.1-7
• /
• 2004

SOI 구조에서 형성된 MOS 트랜지스터의 장점과 strained Si에서 전자의 이동도가 향상되는 효과를 동시에 고려하기 위해 buried oxide(BOX)층과 Top Si층 사이에 Ge을 삽입하여 strained Si/relaxed SiGe/SiO₂Si 구조를 형성하고 strained Si fully depletion(FD) n-MOSFET를 제작하였다. 상부 strained Si층과 하부 SiGe층의 두께의 합을 12.8nm로 고정하고 상부 strained Si 층의 두께에 변화를 주어 두께의 변화가 electron mobility에 미치는 영향을 분석하였다. Strained Si/relaxed SiGe/SiO2/Si (strained Si/SGOI) 구조위의 FD n-MOSFET의 전자 이동도는 Si/SiO₂/Si (SOI) 구조위의 FD n-MOSFET 에 비해 30-80% 항상되었다. 상부 strained Si 층과 하부 SiGe 층의 두께의 합을 12.8nm 로 고정한 shrined Si/SGOI 구조 FD n-MOSFET에서 상부층 strained Si층의 두께가 감소하면 하부층 SiGe 층 두께 증가로 인한 Ge mole fraction이 증가함에 의해 inter-valley scattering 이 감소함에도 불구하고 n-channel 층의 전자이동도가 감소하였다. 이는 strained Si층의 두께가 감소할수록 2-fold valley에 있는 전자가 n-channel 층에 더욱더 confinement 되어 intra-valley phonon scattering 이 증가하여 전자 이동도가 감소함이 이론적으로 확인되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.98-99
• /
• 2002

대표적인 II-VI족 극성 반도체 결정인 ZnTe[001]와 ZnCdTe MQW에서 시료의 에너지 띠보다 낮은 에너지의 펨토초 티타늄 사파이어 레이저를 이용하여 결맞는 포논을 발생시키고 그 특성을 관찰하였다. 결맞는 포논의 신호는 그림1)과 같이 반사 및 투과형 전기 광학적 샘플링(Reflective/Transmissive Electro-Optic Sampling： REOS/TEOS)방법과 여기-탐사광 방법으로 시간 영역에서 측정하였다. (중략)