• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.97-98
• /
• 2011

The HVAC(Heating Ventilation and Air conditioning) system is controlled by two ways, one is ON/OFF control and the other is PWM inverter with V/F. Control of blower with the use of PWM inverter has quite some benefits such as the capability of changing speed, high efficiency and reduced noise level compared with ON/OFF control. But if blower is operated at low speed, high THD generated by decrease of ma, and output voltage lowered in proportion to frequency. To solve these problems, filter should be installed at the output stage of inverter, which can decrease THD but has problems such as increase of volume size and additional braking resistance. This paper proposes the PWAM method which can reduce THD instead of installing the filter at the output stage of inverter. The proposed PWAM method is an inverter modulation method that fixes the modulation index of inverter to reduce THD by varying DC link voltage of inverter unlike conventional PWM method. Finally, the validity of proposed PWAM methods verified by experiments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.spc1
• /
• pp.198-202
• /
• 2006

We investigated the fecundity, egg size, reproductive output, and breeding frequency and season of Neocaridina denticulata denticulata and Latreutes planirostris which inhabit extremely different habitats. The marine shrimp Latreutes planirostris produced more eggs had at a given carapace length than the freshwater shrimp N. d. denticulata. However, N. d. denticulata had a larger egg volume and greater reproductive output than L. planirostris. The monthly gonadosomatic index (GSI) of the freshwater shrimp began to increase in April and reached a maximum in May, suggesting a single breeding period. In contrast, the GSI of the marine shrimp exhibited two breeding peaks: May-June and September. In both shrimps, the regressions between carapace length and ovarian weight were significant at the non-eyed and eyed embryo stages. For both species, an analysis of covariance revealed significant difference between the two regressions in elevation, but not in slope. These results indicate the potential for multiple ovulations within the reproductive season.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.320-326
• /
• 2001

In this paper, we have fabricated asymmetric Y-branch optical power splitters with various optical power splitting ratios by changing the width of one of the output waveguides using $Ag^+-Na^+$ ion change method in BK7 glass. The transmission characteristics of asymmetric Y-branch optical power splitters with different output waveguide width have been investigated using the finitedifference beam propagation method (FD-BPM). We have found the index of the channel waveguide formed by Ag+-Na+ ion change method in BK7 glass and have fabricated channel waveguides to examine the transmission characteristics of channel waveguide. And we have fabricated asymmetric Y-branch optical power splitters with output waveguide width from TEX>$4{\mu}m$ to $6{\mu}m$. /TEX>.

• Journal of Power Electronics
• /
• v.14 no.3
• /
• pp.531-540
• /
• 2014

A novel carrier-based PWM (CBPWM) strategy of a three-level NPC converter is proposed in this paper. The novel strategy can eliminate the low-frequency neutral point (NP) voltage oscillation under the entire modulation index and full power factor. The basic principle of the novel strategy is introduced. The internal modulation wave relationship between the novel CBPWM strategy and traditional SPWM strategy is also studied. All 64 modulation wave solutions of the CBPWM strategy are derived. Furthermore, the proposed CBPWM strategy is compared with traditional SPWM strategy regarding the output phase voltage THD characteristics, DC voltage utilization ratio, and device switching losses. Comparison results show that the proposed strategy does not cause NP voltage oscillation. As a result, no low-frequency harmonics occur on output line-to-line voltage and phase current. The novel strategy also has higher DC voltage utilization ratio (15.47% higher than that of SPWM strategy), whereas it causes larger device switching losses (4/3 times of SPWM strategy). The effectiveness of the proposed modulation strategy is verified by simulation and experiment results.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.443-445
• /
• 1995

Since the residential load is an AC load, while the output of solar cell is a DC power, the photovoltaic system needs the DC/AC converter to utilize solar cell and must provide the sinusoidal wave current and voltage with unity power factor in the case of driving to Interact with utility line. It is always necessary for the output of solar cell to operate in the vicinity of maximum power point, since it is greatly fluctuated by insolation. This paper treats that we will constitute a single phase PWM voltage source inverter and trace the modulation index which always maximize the output of solar cell in propotion to insolation variation and prove it by simulation that we can provide current wave, which is nearly sinusoidal wave with unity power factor, for load and utility line.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1496-1504
• /
• 2019

This paper proposes a new THD reduction algorithm for modular multilevel converters (MMCs) with offset voltage injection operated in nearest level modulation (NLM). High voltage direct current (HVDC) is actively introduced to the grid connection of offshore wind powers, and this paper deals with a voltage generation technique with an MMC for wind power generation. In the proposed method, third harmonic voltage is added for reducing the THD. The third harmonic voltage is adjusted so that each of the pole voltage magnitudes maintains a constant value with a maximum number of (N+1) levels, where N is the number of sub-modules per arm. By using the proposed method, the THD of the output voltage is mitigated without increasing the switching frequency. In addition, the proposed method has advantageous characteristics such as simple implementation. As a part of this study, this paper compares the THD results of the conventional method and the proposed method with offset voltage injection to reduce the THD. In this paper, simulations have been carried out to verify the effectiveness of the proposed scheme, and the proposed method is implemented by a HILS (Hardware in the Loop Simulation) system. The obtained results show agreement with the simulation results. It is confirmed that the new scheme achieved the maximum level output voltage and improved the THD quality.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.295-300
• /
• 1990

This paper describes a new method to increase the fundamental output of PWM inverter by adding all triplen-harmonics to sinusoidal reference wave. As a result, the amplitude of the fundamental component is increased upto 21 percent compared with the conventional SPWM method, and hence the conversion efficiency of dc link is higher. Also as the commutation number of the inverter is decreased to two-thirds, the heating of the switch devices is reduced. In addition random carrier modulation is adopted to lower the acoustic noise at given frequency modulation index.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.69-72
• /
• 2004

In this paper, we measured the electrical and optical characteristics of an electrodeless fluorescent lamp system as product of the inside and outside of the country and compared the measured data. Output current wave of domestic 150 W is unstable than it's of Endura 150 W. But the former of spend time after discharging and output current value is small than the latter. And optical characteristics(brightness, flux, color rendering index, efficiency) value of the former is a little small than the latter. In conclusion, if we improve a little more quality then we must secure the superiority in competition.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2098-2106
• /
• 2014

In the area of clustering, there are numerous approaches to construct clusters in the input space. For regression problem, when forming clusters being a part of the overall model, the relationships between the input space and the output space are essential and have to be taken into consideration. Conditional Fuzzy C-Means (c-FCM) clustering offers an opportunity to analyze the structure in the input space with the mechanism of supervision implied by the distribution of data present in the output space. However, like other clustering methods, c-FCM focuses on the distribution of the data. In this paper, we introduce a new method, which by making use of the ambiguity index focuses on the boundaries of the clusters whose determination is essential to the quality of the ensuing classification procedures. The introduced design is illustrated with the aid of numeric examples that provide a detailed insight into the performance of the fuzzy classifiers and quantify several essentials design aspects.

• Journal of Technology Innovation
• /
• v.11 no.2
• /
• pp.151-173
• /
• 2003

This paper analyses the efficiency and productivity of R&D system across time (1991${\sim}$2000) and 16 OECD countries using multi-output and multi-input non-parametric frontier methods such as DEA (data envelopement analysis) and Malmquist productivity indexes. Malmquist productivity indexes are decomposed into two components measures, namely technical change and efficiency change. To calculate R&D efficiency and productivity, we used R&D stock and the number or researchers as R&D input proxies and the number of adjusted SCI papers and U.S. patent applications as R&D output proxies. Empirical result shows that Switzerland, Canada, U.S., Australia's R&D efficiencies are the highest and Korea's R&D productivity growth is the highest in the sample for the period. Technical efficiency growth was a more important source of productivity growth than technological innovation.