• Title/Summary/Keyword: Moon Phases

Search Result 300, Processing Time 0.026 seconds

Electromyographical Analyses of Muscle Activities of Upper Trunk for Ssireum Dutguri Technique (Electromyography 기법을 이용한 씨름 덧걸이 기술의 상체 근 동원 비교분석)

  • Shin, Sung-Hyu;Lim, Young-Tae;Kim, Tae-Hwan;Park, Ki-Ja;Kwon, Moon-Suk
    • Korean Journal of Applied Biomechanics
    • /
    • v.13 no.1
    • /
    • pp.95-108
    • /
    • 2003
  • The purposes of this study were to analyze the muscle activities and the characteristics of muscle recruiting patterns of upper trunk for Ssirum dutguri technique using three top-ranked elite Ssirum players. The EMG technique was used to record muscle activities of both right and left sides of latissimus dorsi, biceps brachii, and erector spinae. Six surface electrodes were placed on the surface of the selected muscles and one ground electrode was also attached on the back of neck(C7). One video camera was also used to record the Ssirum motion to define 4 events and 3 phases for further analysis. The raw EMG data were filtered with band pass filter (50-400 Hz) to remove artifacts and then low pass filtered (4 Hz) to find the linear envelope which resemble muscle tension curve. This filtered EMG data were normalized to MVIC for the purpose of comparion between the subjects. The results were indicated that each subject with different physical characteristics showed very different muscle activity patterns. Although Ssirum dutguri is considered as foot technique the player grasped opponent's satba(belt) with both hands when they play. Because of this reason, activities of upper trunk muscles were relatively high. However, direct comparison between upper and lower body muscles was not possible due to the lack of the data in present study. Interestingly, all threes subjects showed that erector spinae muscle activity was comparatively higher than those of latissimus dorsi and biceps brachii. This implies to reinforce back muscle as a routine of training to improve performance or to prevent back injury.

Hydrological variability in the Han River basin during different phases of El Ni$\tilde{n}$o (서로 다른 엘니뇨 형태에 따른 한강유역의 수문학적 변동성 분석)

  • Kim, Jong-Suk;Yoon, Sun-Kwon;Lee, Joo-Heon;Moon, Young-Il
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.197-197
    • /
    • 2012
  • 본 연구에서는 대기 순환패턴 및 수문 환경변화에 영향을 미치는 주요인자인 El Ni$\tilde{n}$o-Southern Oscillation (ENSO)의 서로 다른 형태인 Warm-pool (WP) El Ni$\tilde{n}$o, Cold-tongue (CT) El Ni$\tilde{n}$o에 따른 한강유역의 봄철 (March~May)과 여름철 (June~August) 강수 및 유출의 특성을 분석하였다. 봄철 강수량의 경우, WP El Ni$\tilde{n}$o 시기에 증가추세를 보이며, 강수의 변동특성 또한 크게 나타났다. 여름철 강수량의 경우, CT El Ni$\tilde{n}$o 시기에는 평년보다 대체로 건조한 경향을 보이나, WP El Ni$\tilde{n}$o 시기에는 유역 전체에서 습한 경향을 보였으며 강수의 변동성은 매우 작은 것으로 분석되었다. 봄철 유출량의 경우, CT El Ni$\tilde{n}$o 시기와 WP El Ni$\tilde{n}$o 시기에 모두 평년치보다 크게 나타났으며, WP El Ni$\tilde{n}$o 시기에 한강 남부 대부분 유역에서 유출량이 통계적으로 유의한 증가 경향을 보였다. 여름철 유출량의 경우, CT El Ni$\tilde{n}$o 시기에는 대부분 유역에서 평년치보다 감소하나 수문 변량의 변동성은 큰 것으로 분석되었다. WP El Ni$\tilde{n}$o 시기에는 거의 모든 유역에서 유출이 증가하는 것으로 나타났으며, 특히 13개 중권역에서는 유출의 변동성이 작고 통계적으로 유의한 증가패턴이 분석되었다. 따라서 본 연구는 서로 다른 두가지 형태의 El Ni$\tilde{n}$o패턴에 대하여 한강유역의 봄철과 여름철 수자원 변동성에 민감하게 영향을 미치고 있음을 확인하였으며 수자원의 효율적인 예측 및 관리와 안정적인 용수공급을 위한 수문기상인자와 수문자료간의 관계 규명에 유용하게 활용될 것으로 기대한다.

  • PDF

Shell Valve Movement of Pacific Oysters, Crassostrea gigas, in Response to Low Salinity Water (저염수에서 이매패류 참굴(Crassostrea gigas)의 패각운동)

  • Moon, Suyeon;Oh, Seok Jin
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.23 no.6
    • /
    • pp.684-689
    • /
    • 2017
  • We examined the possibility of developing an early monitoring system using the shell valve movement activity of Pacific oyster (Crassostrea gigas) for early detection of low salinity water in coastal areas. At salinity levels of 30 psu and 20 psu, SVMs were detected $7.32{\pm}3.21times/hr$ and $7.11{\pm}3.90times/hr$, respectively, The patterns and times of SVMs were not significantly different between the two experiment phases. However, at 10 psu and 5 psu, shell valves were observed to be permanently closed in all experiments. Under combined condition (Group 1: temperature $15^{\circ}C$ ${\times}$ salinity 15 psu), SVMs were observed from 20 psu to 30 psu over a 2 - 3 hr period, and then remained closed. In Group 2 (temperature $30^{\circ}C$ ${\times}$ salinity 15 psu), SVMs were observed, which indicated that the physiological condition of the oysters reached a critical point. Thus, it may be possible to utilize SVMs as an early warning signal for low salinity water.

Advanced Korean Industrial Safety and Health Policy with Risk Assessment

  • Kwon, Hyuck-Myun;Cho, Jae-Hyun;Moon, Il;Choi, Jae-Wook;Park, Doo-Yong;Lee, Young-Soon
    • Safety and Health at Work
    • /
    • v.1 no.1
    • /
    • pp.29-36
    • /
    • 2010
  • This article describes a systematic roadmap master plan for advanced industrial safety and health policy in Korea, with an emphasis on. Since Korean industries had first emergence of industrial safety and health policy in 1953, enormous efforts have been made on upgrading the relevant laws in order to reflect real situation of industrial work environment in accordance with rapid changes of Korean and global business over three decades. Nevertheless, current policy has major defects; too much techniques-based articles, diverged contents in less organization, combined enforcement and punishments and finally enforcing regulations full of commands and control. These deficiencies have make it difficult to accommodate changes of social, industrial and employment environment in customized fashion. The approach to the solution must be generic at the level of paradigm-shift rather than local modifications and enhancement. The basic idea is to establish a new system integrated with a risk assessment scheme, which encourages employers to apply to their work environment under comprehensive responsibility. The risk assessment scheme is designed to enable to inspect employers' compliances afterwards. A project comprises four yearly phases based on applying zones; initially designating and operating a specified risk zone, gradually expanding the special zones during a period of 3 years (2010-2012) and the final zone expanded to entire nation. In each phase, the intermediate version of the system is updated through a process of precise and unbiased validation in terms of its operability, feasibility and sustainability with building relevant infrastructures as needed.

Naturally Occurring Biflavonoid, Ochanflavone, Inhibits Cyclooxygenases-2 and 5-Lipoxygenase in Mouse Bone Marrow-derived Mast Cells

  • Son Min-Jung;Moon Tae-Chul;Lee Eun-Kyung;Son Kun-Ho;Kim Hyun-Pyo;Kang Sam-Sik;Son Jong-Keun;Lee Seung-Ho;Chang Hyeun-Wook
    • Archives of Pharmacal Research
    • /
    • v.29 no.4
    • /
    • pp.282-286
    • /
    • 2006
  • Ochnaflavone is a medicinal herbal product isolated from Lonicera japonica that inhibits cyclooxygenase-2 (COX-2) dependent phases of prostaglandin $D_2(PGD_2)$ generation in bone marrow-derived mast cells (BMMC) in a concentration-dependent manner with $IC_{50}$ values of $0.6{\mu}M$. Western blotting probed with specific anti-COX-2 antibodies showed that the decrease in quantity of the $PGD_2$ product was accompanied by a decrease in the COX-2 protein level. In addition, this compound consistently inhibited the production of leukotriene $C_4 (LTC_4)$ in a dose dependent manner, with an $IC_{50}$ value of $6.56 {\mu}M$. These results demonstrate that ochnaflavone has a dual cyclooxygenase-2/5-lipoxygenase inhibitory activity. Furthermore, this compound strongly inhibited degranulation reaction in a dose dependent manner, with an $IC_{50}$ value of $3.01{\mu}M$. Therefore, this compound might provide a basis for novel anti-inflammatory drugs.

Fabrication and Characterization of Spherical Carbon-Coated Li3V2(PO4)3 Cathode Material by Hydrothermal Method with Reducing Agent

  • Moon, Jung-In;Song, Jeong-Hwan
    • Korean Journal of Materials Research
    • /
    • v.29 no.9
    • /
    • pp.519-524
    • /
    • 2019
  • Spherical $Li_3V_2(PO_4)_3$ (LVP) and carbon-coated LVP with a monoclinic phase for the cathode materials are synthesized by a hydrothermal method using $N_2H_4$ as the reducing agent and saccharose as the carbon source. The results show that single phase monoclinic LVP without impurity phases such as $LiV(P_2O_7)$, $Li(VO)(PO_4)$ and $Li_3(PO_4)$ can be obtained after calcination at $800^{\circ}C$ for 4 h. SEM and TEM images show that the particle sizes are $0.5{\sim}2{\mu}m$ and the thickness of the amorphous carbon layer is approximately 3~4 nm. CV curves for the test cell are recorded in the potential ranges of 3.0~4.3 V and 3.0~4.8 V at a scan rate of $0.01mV\;s^{-1}$ and at room temperature. At potentials between 3.0 and 4.8 V, the third $Li^+$ ions from the carbon-coated LVP can be completely extracted, at voltages close to 4.51 V. The carbon-coated LVP exhibits an initial specific discharge capacity of $118mAh\;g^{-1}$ in the voltage region of 3.0 to 4.3 V at a current rate of 0.2 C. The results indicate that the reducing agent and carbon source can affect the crystal structure and electrochemical properties of the cathode materials.

Development of deep learning-based holographic ultrasound generation algorithm (딥러닝 기반 초음파 홀로그램 생성 알고리즘 개발)

  • Lee, Moon Hwan;Hwang, Jae Youn
    • The Journal of the Acoustical Society of Korea
    • /
    • v.40 no.2
    • /
    • pp.169-175
    • /
    • 2021
  • Recently, an ultrasound hologram and its applications have gained attention in the ultrasound research field. However, the determination technique of transmit signal phases, which generate a hologram, has not been significantly advanced from the previous algorithms which are time-consuming iterative methods. Thus, we applied the deep learning technique, which has been previously adopted to generate an optical hologram, to generate an ultrasound hologram. We further examined the Deep learning-based Holographic Ultrasound Generation algorithm (Deep-HUG). We implement the U-Net-based algorithm and examine its generalizability by training on a dataset, which consists of randomly distributed disks, and testing on the alphabets (A-Z). Furthermore, we compare the Deep-HUG with the previous algorithm in terms of computation time, accuracy, and uniformity. It was found that the accuracy and uniformity of the Deep-HUG are somewhat lower than those of the previous algorithm whereas the computation time is 190 times faster than that of the previous algorithm, demonstrating that Deep-HUG has potential as a useful technique to rapidly generate an ultrasound hologram for various applications.

A Study on Developing Archival Authority Records through Analyzing Descriptive Elements and Applying EAC-CPF in University Archives: Converging Archival Information Descriptive Rules with Data Structure Standards (대학기록물 전거레코드 구축을 위한 기술요소 분석과 EAC-CPF 적용에 관한 연구: 기록물 기술규칙과 데이터구조표준의 융합을 중심으로)

  • Kim, Moon-kyung;Koo, Joung Hwa
    • Journal of the Korea Convergence Society
    • /
    • v.12 no.1
    • /
    • pp.65-75
    • /
    • 2021
  • The research aims to suggest descriptive elements for developing archival authority records in university archives through converging archival information descriptive rules with EAC-CFP, data structure standards. To achieve the purpose, the research conducted the following research phases: first, to analyze the main characteristics of record producers according to the features of both functions and organizations of the university. Second, to analyze the descriptive elements by comparing the rules between ISAAR(CPF) and the guidelines of the authority records of NAK and suggest descriptive elements to build archival authority records. Finally, to suggest the finally deducted descriptive elements by matching up with those of EAC-CPF. The significance of the result is to provide both standardized access points to retrieve university records and to search the contextual information of record production in the online environments by converging the data standard structure, EAC-CPF.

Fabrication and Properties of Ti-HA Composites Produced by Pulsed Current Activated Sintering for Biomaterials (통전가압활성소결에 의한 생체재료용 Ti-HA복합재료 제조 및 특성)

  • Woo, Kee Do;Kang, Duck Soo;Kwon, Eui Pyo;Moon, Min Seok;Shon, In Jin;Liu, Zhiguang
    • Korean Journal of Metals and Materials
    • /
    • v.47 no.8
    • /
    • pp.508-515
    • /
    • 2009
  • Ti-6Al-4V biomaterial is widely used as a bone alternative. However, Ti-6Al-4V ELI alloy suffers from numerous problems such as a high elastic modulus and high toxicity. Therefore, non-toxic biomaterials with low elastic moduli need to be developed. Ti-HA(hydroxyapatite) composites were fabricated in the present work by pulsed current activated sintering (PCAS) at $1000^{\circ}C$ under 60 MPa using mixed Ti and HA powders. The effects of HA content on the physical and mechanical properties of the sintered Ti-HA composites have been investigated. X-ray diffraction(XRD) analysis of the Ti-HA composites, including Ti-40 wt%HA in particular, revealed new phases, $Ti_{2}O$, CaO, $CaTiO_3$, and TixPy, formed by chemical reactions between Ti and HA during sintering. The hardness of the Ti-HA composites decreased with an increase in HA content. The corrosion resistance of these composites was observed to be an excellent candidate as a commercial Ti-6Al-4 V ELI alloy. A Ti-5 wt%HA composite fabricated by PCAS is recommended as a new biomaterial, because it offers good corrosion resistance, compressive strength, wear resistance, and biocompatibility, and a low Young's modulus.

Grain Shape and Grain Growth Behavior in the (K0.5Na0.5)NbO3-CaZrO3 System ((K0.5Na0.5)NbO3-CaZrO3 계에서 입자모양과 입자성장 거동)

  • Lee, Chul-Lee;Moon, Kyoung-Seok
    • Journal of Powder Materials
    • /
    • v.29 no.2
    • /
    • pp.110-117
    • /
    • 2022
  • The grain growth behavior in the (1-x)K0.5Na0.5NbO3-xCaZrO3 (KNNCZ-x) system is studied as a function of the amount of CZ and grain shape. The (1-x)K0.5Na0.5NbO3-xCaZrO3 (KNNCZ-x) powders are synthesized using a conventional solid-state reaction method. A single orthorhombic phase is observed at x = 0 - 0.03. However, rhombohedral and orthorhombic phases are observed at x = 0.05. The grain growth behavior changes from abnormal grain growth to the suppression of grain growth as the amount of CaZrO3 (CZ) increases. With increasing CZ content, grains become more faceted, and the step-free energy increases. Therefore, the critical growth driving force increases. The grain size distribution broadens with increasing sintering time in KNNCZ-0.05. As a result, some large grains with a driving force larger than the critical driving force for growth exhibit abnormal grain growth behavior during sintering. Therefore, CZ changes the grain growth behavior and microstructure of KNN. Grain growth at the faceted interface of the KNNCZ system occurs via two-dimensional nucleation and growth.