• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1117-1120
• /
• 1998

BIST architecture and circuit design are presented for the self-test of various datapath megacells including embedded SRAM, barrel shifter, adder and multiplier. The BIST architecture is composed of VCO, ROM, comparator and otehr control logic to measure the megacell' performance up to 300MHz. PC interface and control logic are also implemented to perform the manual testing of each megacell with various test patterns. The control logic was designed using VHDL and its circuit is synthesized using Synopsys for $0.6\mu$ 1-poly, 3-matal CMOS technology.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1E
• /
• pp.14-19
• /
• 2001

We have proposed BIST method and circuit for embedded 16M SDRAM with logic. It can test the AC parameter of embedded 16M SDRAM using the BIST circuit capable of detecting the address of a fail cell installed in an Merged Memory with Logic(MML). It generates the information of repair for redundancy circuit. The function and AC parameter of the embedded memory can also be tested using the proposed BIST method. It is possible to test the embedded SDRAM without external test pin. The total gate of the BIST circuit is approximately 4,500 in the case of synthesizing by 0.25μm cell library and is verified by Verilog simulation. The test time of each one AC parameter is about 200ms using 2Y-March 14n algorithm.

• The Journal of Information Technology
• /
• v.3 no.3
• /
• pp.57-65
• /
• 2000

We have proposed BIST method and circuit for embedded 16M SDRAM with logic. It can test the AC parameter of embedded 16M SDRAM using the BIST circuit capable of detecting the address of a fail cell of a 16M SDRAM installed in an Merged Memory with Logic(MML) generating the information of repair for redundancy circuit. The function and AC parameter of the embedded memory can also be tested using the proposed BIST method. The total gate of the BIST circuit is approximately 4,500 in the case of synthesizing by $0.25\mu\textrm{m}$ cell library. and verify the result of Verilog simulation. The test time of each one AC parameter is about 200ms using 2Y-March 14N algorithm.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1931_1933
• /
• 2009

NoC 기반 시스템이 적용되는 설계는 시스템 크기가 커짐에 따라 칩 테스트 문제도 동시에 제기 되고 있다. 이에 따라 NoC 기반의 시스템의 테스트 시간을 줄일 수 있는 internal test 방식의 새로운 BIST(Built-in Self-Test) 구조에 관한 연구를 하였다. 기존의 NoC 기반 시스템의 BIST 테스트 구조는 각각의 router와 core에 BIST logic과 random pattern generator로 LFSR(Linear Feedback Shift Register)을 사용하여 연결하는 individual 방식과 하나의 BIST logic과 LFSR을 사용하여 각각의 router와 core에 병렬로 연결하는 distributed 방식을 사용한다. 이때, LFSR에서 생성된 테스트 벡터가 router에 사용되는 FIFO 메모리를 통과하면서 생기는 테스트 타임 증가를 줄이기 위하여 shift register 형태의 FIFO 메모리를 변경하였다 제안된 방법에서 테스트 커버리지 98%이상을 달성하였고, area overhead면에서 효과를 볼 수 있다.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1169-1172
• /
• 1998

We designed an ALU(Airthmetic Logic Unit) with BIST(Built-In Self Test), which is suitable for 32-bit DSP RISC processors. We minimized the area of this ALU by allowing different operations to share several hardware blocks. Moreover, we applied DFT(Design for Testability) to ALU and offered Bist(Built-In Self-Test) function. BIST is composed of pattern generation and response analysis. We used the reseeding method and testability design for the high fault coverage. These techniques reduce the test length. Chip's reliability is improved by testing and the cost of testing system can be reduced.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.640-648
• /
• 2014

Excessive power dissipation is one of the major issues in the testing of VLSI systems. Many techniques are proposed for scan test, but there are not so many for logic BIST because of its unmanageable randomness. This paper presents a novel low switching activity BIST scheme that reduces toggle frequency in the majority of scan chain inputs while allowing a small portion of scan chains to receive pseudorandom test data. Reducing toggle frequency in the scan chain inputs can reduce test power but may result in fault coverage loss. Allowing a small portion of scan chains to receive pseudorandom test data can make better uniform distribution of 0 and 1 and improve test effectiveness significantly. When compared with existing methods, experimental results on larger benchmark circuits of ISCAS'89 show that the proposed strategy can not only reduce significantly switching activity in circuits under test but also achieve high fault coverage.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.942-952
• /
• 2014

This paper presents a novel test point insertion (TPI) method for a pseudo-random built-in self-test (BIST) to reduce the area overhead. Recently, a new TPI method for BISTs was proposed that tries to use functional flip-flops to drive control test points instead of adding extra dedicated flip-flops for driving control points. The replacement rule used in a previous work has limitations preventing some dedicated flip-flops from being replaced by functional flip-flops. This paper proposes a logic cone analysis-based TPI approach to overcome the limitations. Logic cone analysis is performed to find candidate functional flop-flops for replacing dedicated flip-flops. Experimental results indicate that the proposed method reduces the test point area overhead significantly with minimal loss of testability by replacing the dedicated flip-flops.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.30-37
• /
• 2006

This paper presents a modified scan cell architecture to reduce the power dissipation during testing. It not only eliminates switching activities in the combinational logic during scan shifting but also reduces switching activities in the scan chain during the time. Furthermore, it limits the transitions on capture cycles. It can be made for test-per-scan BIST and employed in both single scan style and multiple scan style. Experimental results demonstrate that the proposed structure achieves the same fault coverage with lower power consumption compared to other existing BIST schemes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.79-90
• /
• 2005

In this paper, we propose a new clustered reconfigurable interconnect network (CRIN) BIST to improve the embedding probabilities of random-pattern-resistant-patterns. The proposed method uses a scan-cell reordering technique based on the signal probabilities of given test cubes and specific hardware blocks that increases the embedding probabilities of care bit clustered scan chain test cubes. We have developed a simulated annealing based algorithm that maximizes the embedding probabilities of scan chain test cubes to reorder scan cells, and an iterative algorithm for synthesizing the CRIN hardware. Experimental results demonstrate that the proposed CRIN BIST technique achieves complete fault coverage with lower storage requirement and shorter testing time in comparison with the conventional methods.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.70-76
• /
• 2015

This paper introduces an FPGA self-test architecture reusing FPGA boundary scan chain as self-test circuits. An FPGA boundary scan cell is two or three times bigger than a normal boundary scan cell because it is used for configuring the function of input/output pins functions as well as testing and debugging. Accordingly, we analyze the architecture of an FPGA boundary scan cell in detail and design a set of built-in self-test (BIST) circuits in which FPGA boundary scan chain and a small amount of FPGA logic elements. By reusing FPGA boundary scan chain for self-test, we can reduce area overhead and perform a processor based on-board FPGA testing/monitoring. Experimental results show the area overhead comparison and simulation results.