• Mass Spectrometry Letters
• /
• v.3 no.4
• /
• pp.87-92
• /
• 2012

In this study, we explored a new approach for generating ions of organics and biomolecules using contactless atmospheric pressure ionization (C-API). That is, a tapered capillary (~20 cm) was connected to a syringe, which was coupled to a syringe pump for providing a given flow rate to introduce sample solution to the proximity of a mass spectrometer. The gas phase ions derived from analytes were readily formed in the capillary outlet, which was very close to the mass spectrometer (~1 mm). No external electric connection was applied on the capillary emitter. This setup is very simple, but it can function as an ion source. This approach can be readily used for the analysis of small molecules such as amino acids and large molecules such as peptides and proteins. The limit of the detection of this approach was estimated to be ~10 pM when using bradykinin as the sample. Thus, we believe that this approach should be very useful for being used as an alternative ion source because of its low cost, high sensitivity, simplicity, and ease of operation.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.2
• /
• pp.81-90
• /
• 1998

NiCrAly/YSZ(8wt% Y2O3-Zro2) functionally fraded thermal barrier coating (FGC) layers on a Co-base sureralloy (HAYNESS 188) substrate were fabricated using Ar shielded single torch air plasma spraying method. Functional grading were produced with the stepwise compositional change throughout layer thinkness. Microstructural observation revealed a sucessful fabrication of NiCrAly/YSZ FGC. From the results of the curvature measurement, adhesive stength measurement and thermal shock test for the FGC, it was concluded that the optimum enhance of functionally graded coating layer thinkcess and compositional pattern exit to enhance the properties of FGC, which is closely reated to the internal residual distribution with it.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.17-24
• /
• 2008

The aim of this paper is to report our preliminary results of investigating the spatial focalization of Zen-meditation EEG (electroencephalograph) in alpha band (8-13 Hz). For comparison, the study involved two groups of subjects, practitioners (experimental group) and non-practitioners (control group). To extract EEG alpha rhythm, wavelet analysis was applied to multi-channel EEG signals. Normalized alpha-power vectors were then constructed from spatial distribution of alpha powers, that were classified by Fuzzy C-means based algorithm to explore various brain spatial characteristics during meditation (or, at rest). Optimal number of clusters was determined by correlation coefficients of the membership-value vectors of each cluster center. Our results show that, in the experimental group, the incidence of frontal alpha activity varied in accordance with the meditation stage. The results demonstrated three different spatiotemporal modules consisting with three distinctive meditation stages normally recognized by meditation practitioners. The frontal alpha activity in two groups decreased in different ways. Particularly, monotonic decline was observed in the control group, and the experimental group showed increasing results. The phenomenon might imply various mechanisms employed by meditation and relaxation in modulating parietal alpha.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.178-186
• /
• 2016

The present study was conducted to investigate the effect of whole wheat bread with added Lindera obtusiloba (LO) and Capsosiphon fulvescens (CF) ethanol extracts on serum glucose and lipid levels in Sprague Dawley rats. Rats were divided into five groups depending on the diet administered: normal bread (NC), whole wheat bread (W), whole wheat bread with LO leaves extract (WL), whole wheat bread with CF extract (WC), and whole wheat bread with freeze-drying CF (WDC). After 4 weeks of consuming the experimental diet, the blood glucose level and hemoglobin A1c contents were found to be significantly lower in the W, WL, WC, and WDC groups than in the NC group. The high-density lipoprotein-cholesterol levels increased in the WL group when compared to those in the NC group and triglycerides levels decreased in all wheat groups compared to those in the NC group. These results suggest that wheat breads containing LO and CF extracts are effective for preventing hypercholesterolemia and obesity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.670-680
• /
• 2010

A low power single-chip CMOS receiver for 60 GHz mobile application are proposed in this paper. The single-chip receiver consists of a 4-stage current re-use LNA with under 4 dB NF, Cgs compensating resistive mixer with -9.4 dB conversion gain, Ka-band low phase noise VCO with -113 dBc/Hz phase noise at 1 MHz offset from 26.89 GHz, high-suppression frequency doubler with -0.45 dB conversion gain, and 2-stage current re-use drive amplifier. The size of the fabricated receiver using a standard 0.13 ${\mu}m$ CMOS technology is 2.67 mm$\times$0.75 mm including probing pads. An RF bandwidth is 6.2 GHz, from 55 to 61.2 GHz and an LO tuning range is 7.14 GHz, from 48.45 GHz to 55.59 GHz. The If bandwidth is 5.25 GHz(4.75~10 GHz) The conversion gain and input P1 dB are -9.5 dB and -12.5 dBm, respectively, at RF frequency of 59 GHz. The proposed single-chip receiver describes very good noise performances and linearity with very low DC power consumption of only 21.9 mW.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.24-30
• /
• 2003

This study focuses on the arithmetical methodology and hardware implementation of low system-complexity A $B^2$＋C operator over GF(2$^{m}$ ) using the irreducible AOP of degree m. The proposed parallel-in parallel-out operator is composed of CS, PP, and MS modules, each can be established using the array structure of AND and XOR gates. The proposed multiplier is composed of (m＋1)$^2$ 2-input AND gates and (m＋1)(m＋2) 2-input XOR gates. And the minimum propagation delay is $T_{A}$ ＋(1＋$\ulcorner$lo $g_2$$^{m}$ $\lrcorner$) $T_{x}$ . Comparison result of the related A $B^2$＋C operators of GF(2$^{m}$ ) are shown by table, It reveals that our operator involve more lower circuit complexity and shorter propagation delay then the others. Moreover, the interconnections of the out operators is very simple, regular, and therefore well-suited for VLSI implementation.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.271-280
• /
• 1995

These studies examined the production of oligosaccharides by ${\beta}-galactosidase$originated from Aspergillus oryzae and Kluyveromyces fragilis mixed. In addition, heat resistance and acid stability of transgalactosylated oligosaccharides were measured. When ${\beta}-galactosidase$ from A. oryzae, K. fragilis and mixed ${\beta}-galactosidase$ were added to 30%(w/v) lactose solution, maximum production of transgalactosylated oligosaccharides were 26.9%, 37.05 and 27.2%, respectively. The ratios of disacchride, trisacchride and tetrasaccharide in transgalactosylated oligosaccharides were 20.5 : 5.4 : 0.6, 20.4 : 10.5 : 4.2 and 21.0 : 4.1 : 1.9, respectively. Nine different oligosaccharides were recovered with 30% and 40% ethanol fractions. When the 30% ethanol fraction was treated at $150^{\circ}C$ for 10 min more than 90% of oligosaccharides remained stable. More than 90% of the oligosaccharides were stable at $130^{\circ}C$ for 3 min with pH 3.0, whereas there of Kluyveromyces was more than 90% with pH 3.5.

• Korean Journal of Microbiology
• /
• v.30 no.2
• /
• pp.101-107
• /
• 1992

Cytochrome c oxida5e from chemotrophically grown R p , geliitinosu was purified by cytochrome c affinity chromatography and DEAE-Sephacel ion exchange chromatography. The molecular weight of the cytochrome c oxidase was approximately 110.000 Da by sephacryl s-300 gel chromatography and approximately 52, 000 Da by SDS-gel electrophoresis, respectively. Therefore. cytochrolne c oxidase of Rps. gehtinosu seems to be dimer. The cytochrome c oxidasc was very sensitive to temperature. It's Km and Vmax were 20 pM and 44 unitlmg protein for horsc heart cytochrome c as a substrate. respectively, and its optimum pH and temperature were 6.4 and 25$^{\circ}$C. respectively. The absorption peaks of the reduced cytochrome c oxidase showed at 554 nm, 523 nm. and 422 nm. The activiiy of cytochrome c oxidase was inhibited by KCN, and NaN3, but not by CO, antimycir~ A. and myxothiazol. The cytochrome c-551 was produced either in phototrophically or chemotrophically grown Rps. gelaiinosci. The rcduced cytochrome c-551 was oxidized by b-type cytochrome c oxidase from Rp.v. gc.lrtino.sc~. Km and Vmax of cytochrome c oxidase was 26 pM and 31 unitlnlg protein For cytochrome c-551 as a substrate. respectively. Thercfore. thc electron transfer chain of chemotrophically grown Rps. glatinosa seems lo be ubiquinol cytochrome bc, complex -'cytochrome c-55lMb-type cytochrome c oxidase+02.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.1
• /
• pp.12-23
• /
• 1998

The Thermal Barrier Coating(TBC) has been used to improve the heat barrier and tribological properties of the aircraft engine and the automobile engine in high temperature. Especially, the high temperature tribological propertied of the cylinder haed and the piston crown of diesel engine was emphasized. Therefore, the purpose of this work was to evaluate the microstructure, tribological propeer in high tempearmal shock resistance and bonding strength of five layer functionally gradient TBC for the applications. The five layerwere composed with 100% ceramic insulating later, 75(ceramic):25 (metal) layer, 50:50 layer, 25:75 layer and 100% metal bonding layer to redude the thermal stress. the YSL and MSL poweders were the insulation ceramics powers. The NiCrAly, Inconel625 and SUS powders were the bonding and mixingg powders for plasma spray process. According to the result of high temperature wear test, the wera resistance of YSZ/NiCrAlY siytem was most out standing at 600 and $800^{\circ}C$. At $400^{\circ}C$, the wear resistance of YSZ/Inconel system was better than others. Wear volume at other temperature because of the low temperature degration of zirconia. The thermal shock mechanism of 5 later is the vertical crack gegration in insulating layer. this means that the initial cracks were generated in the top layer, and then developed into the composite layers during thermal shock test. Finally, these cracks werereached to the interface of coating and substrate and also, these vertioal cracks join with the horizontal cracks of the each layers. The bonding strength of YSZ/NiCrAlY and YSZ/Inconel 5 layer system is better than other 5layer systems. The theramal shock resistance of thermal barrier coating s with 5 layer system is better than that of 3 layers and 2 layers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1591-1597
• /
• 2003

In this paper, Active Resonator Oscillator using active inductor and active capacitor with HEMTs(agilent ATF­34143) is designed and fabricated. Active inductor with ­25$\Omega$ and 2.4nH in 5.5GHz frequency band and Active capacitor with ­14$\Omega$ and 0.35pF is designed. Active Resonator Oscillator for LO in ISM band(5.8GHz) is designed with active inductor and active capacitor. Active Resonator Oscillator has been simulated by Agilent ADS 2002C. Active Resonator oscillator implemented on the substrate which has the relative dielectric constant of 3.38, the height of 0.508mm, and metal thickness of 0.018mm. This Active Resonator Oscillator shows the oscillation frequency of 5.68GHz with the output power of ­3.6㏈m and phase noise of ­81㏈c/Hz at the offset frequency of 100KHz.