• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.6-8
• /
• 2005

The optical and electrical properties of indium tin oxide (ITO) thin films deposited at room temperature can be substantially enhanced by adopting a two-step process. In the first step, the films (50 nm thick) were grown by pulsed laser deposition (PLD) on glass substrate at room temperature and quickly annealed at $400^{\circ}C$ in nitrogen ambient for 1 minute by using rapid thermal annealing method. The process was completed by additional deposition (150 nm thick) on annealed film at room temperature. High quality ITO films grown by two-step process at room temperature could be obtained with the resistivity of $3.02{\times}10^{-4}{\Omega}cm$, the carrier mobility of 32.07 $cm^2/Vs$, and the transparency above 90 % in visible region mainly due to the enhancement of the film crystallinity and the increase of grain size.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.4
• /
• pp.281-289
• /
• 2016

Agitation is a secondary process used to increase the PR stripping force on an ITO-glass surface; it is an efficient approach to stripping during production. It activates the stripper to chemically penetrate the PR layer and assists by breaking down the physical bonding forces at the surface. In this study, different stripping tests were conducted by varying the dipping time, the composition, the strip temperature, and the stripper concentration. Optimal PR strip conditions were estimated by using comparative visual inspection of stripped sample surfaces. The stripping process was affected by changes in the moving speeds and the sample positions. It was confirmed that the stripping capability improved at a dilute stripper ratio of 20-40% and a strip temperature of $30-40^{\circ}C$ and within 60 s of strip time.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.440-446
• /
• 2009

Indium tin oxide(ITO) substrate is one of the key components of the touch panel and its sputtering process is dependent on the characteristics of various touch panel, such as driving type, size of panel, and the intended use. In this study, we optimized the sputtering condition of ITO film on polycarbonate(PC) by using in-line sputtering method for the application to resistive type touch panel. We varied the $O_2$/Ar gas ratio, sputtering power, pressure and moving speed of substrate to deposit ITO films at room temperature with the base vacuum of $1{\times}10^{-6}\;torr$. The sheet resistance and its uniformity, the transmittance, the thickness of the ITO film on PC substrate are investigated and analyzed. The optimized process parameters are as follows : the sheet resistance is $500{\pm}50\;{\Omega}$/□, the uniformity of sheet resistance is lower than 10%, the transmittance is higher than 87 % at 550nm, and the thickness is about 120~250. The optimized deposition conditions by in-line sputtering method can be applied to the actual mass production for the ITO film manufacturing technology.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1323-1324
• /
• 2008

We developed the Hyper-thermal Neutral Beam (HNB) sputtering process as a plasma damage free process for ITO top anode deposition on inverted Top emission OLED (ITOLED). For examining the effect of the HNB sputtering system, Inverted Bottom emission OLEDs (IBOLED) with ITO top anode electrode were fabricated; the characteristics of IBOLED using HNB sputtering process shows significant suppression of plasma induced damage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.715-718
• /
• 2008

An in-line wet etch/cleaning system was established for the research and development in wet etch process. The system was equipped with a reverse moving system for the reduction in the size of the in-line wet etch/cleaning system and it was possible for the glass substrate to be moved back and forth and alternated in a wet etch bath. For the comparison of the effect of the normal motion and that of the alternating motion on the in-line wet etch process, indium tin oxide(ITO) pattern was obtained through both wet etch process conditions. The results showed that the alternating motion is not inferior to the normal motion in etch rate and in etch uniformity. It is concluded that the alternating motion is possible to be applied to the in-line etch process.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.1
• /
• pp.129-136
• /
• 2001

We consider a solution process of stochastic differential equation(SDE) driven by S'($R^d$)-valued Wiener process and study a large deviation type of estimates for the process. We get an upper bound in exit probability for such a process to leave a ball of radius $\tau$ before a finite time t. We apply the Ito formula to the SDE under the structure of nuclear space.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.148-150
• /
• 2005

Indium tin oxide (ITO) thin film was polished by chemical mechanical polishing (CMP) immediately after pad conditioning with the various conditioning temperatures by control of de-ionized water (DIW). Light transparent efficiency of ITO thin film was improved after CMP process after pad conditioning at the high temperature because the surface morphology was smoother by soften polishing pad and decreased particle size.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.4
• /
• pp.231-236
• /
• 2004

A normally open thermopneumaticc-actuated microvalve has been fabricated and their properties are investigated. The advantages of the proposed microvalve are of the low cost fabrication process and the transparent optical property using polydimethylsiloxane (PDMS) and indium tin oxide (ITO) glass. The fabricated microvalves with in-channel configuration are easily integrated with other microfluidic devices on the same substrate. The fabrication process of thermopneumatic-actuated microvalvesusing PDMS is very simple and its performance is very suitable for a disposable lab-on-a-chip. The PDMS membrane deflection increases and the flow rates of the microchannel with microvalvels decrease as the applied power to the ITO heater increases. The powers at flow-off are dependent on the membrane thickness and the applied inlet pressure but are independent of the channel width of microvalves. The flow rate is well controlled by the switching function of ITO heater and the closing/opening times are around 20 sec and 25 sec, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.244.1-244.1
• /
• 2015

The Ag Nanowire is one of the materials that are widely studied as alternatives to ITO and is available for large area, low cost process and the flexible transparent electrode. However, Ag nanowire can have the problem of a lack of stability at high temperatures, making this impossible to form a film. Using a structure of ITO/AgNW/ITO in photodetector device, we improved the properties of the ITO in the IR region and improved the thermal stability of the AgNW. The structure of ITO/AgNW/ITO has a high transmittance value of 89% at a wavelength of 900 nm and provide a good electrical property. The AgNWs embedded ITO film has a high transmittance, this is because of the light scattering from the AgNW. The thermal stability of the developed ITO/AgNWs/ITO films were investigated and found AgNWs embedded ITO films posses considerable high stability compared to the solo AgNWs on the Si surface. The ITO/AgNWs/ITO device showed a improved photo-response ratio compared to those of the conventional TC device in IR region. This is attributed to the high transmittance and low sheet resistance. We suggest an effective design scheme for IR-sensitive photodetection by using an AgNW embedded ITO.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1761-1763
• /
• 1998

ITO(Iridium-Tin Oxide) thin film, as discharge electrodes in AC PDP, should have low resistivity and high transparency. Regarded as a high deposition rate method, the ITO thin film fabricated by the facing target sputtering system has been studied in this paper. The electrical property of the ITO film deposited below $150^{\circ}C$ is not satisfied. The SEM pictures show that the ITO films deposited below $150^{\circ}C$ are amorphous. After being annealed the amorphous ITO films become crystalline, and for this reason, the electrical property of amorphous ITO films can be effectively improved by annealing process. An ITO film with the resistivity as low as $1.99{\times}10^{-4}$ and transparency above 85% has be gotten after vacuum annealing at $300^{\circ}C$ for 2 hours while deposited at $75^{\circ}C$. The corresponding deposition rate is $220{\AA}/min$.