• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.832-844
• /
• 2008

Distributed localization algorithms are necessary for large-scale wireless sensor network applications. In this paper, we introduce an efficient node distribution based localization algorithm that emphasizes simple refinement and low system load for low-cost and low-rate wireless sensors. Each node adaptively chooses neighbor nodes for sensors, update its position estimate by minimizing a local cost function and then passes this update to the neighbor nodes. The update process considers a distribution of nodes for large-scale networks which have same density in a unit area for optimizing the system performance. Neighbor nodes are selected within a range which provides the smallest received signal strength error based on the real experiments. MATLAB simulation showed that the proposed algorithm is more accurate than trilateration and les complex than multidimensional scaling. The implementation on MicaZ using TinyOS-2.x confirmed the practicality of the proposed algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.219-225
• /
• 2014

This paper describes an IC for Power Factor Correction. It can use electrical appliances which convert power from AC to DC. The power factor can be influenced not only phase difference of voltage and current but also sudden change of current waveform. This circuit enables current wave supplied to load by close to sinusoidal and minimum phase difference of voltage and current waveform. A self oscillated 10[kHz]~100[kHz] pulse signal converted to PWM waveform and it chops rectified full wave AC power which flows to load device. The multiplier and zero current detector circuit, UVLO, OVP, BGR circuits were designed. This IC has been designed and whole chip simulation use 0.5[um] double poly, double metal 20[V] CMOS process.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.1-6
• /
• 2017

This paper focuses on the development of a system that improves the convenience of foreign language learning and enhaces the learning ability of the target language through the use of IT devices. In addition to the basic grammar, the importance of pronunciation and intonation have somewhat crucial effect in everyday communication. Pronunciation and intonation of English are different according to the basic characteristics of a native language and these differences often cause problems in communication. The proposed system distinguishes acceptability in English communication process and requests the correction in realtime. The proposed system minimizes system intervention by collecting various voice signals of foreign language learners and setting that can be considered as acceptable threshold points. As a result, the learner can increase the learning efficiency with minimal interruption of the utterance caused by unnecessary system intervention.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.9-13
• /
• 2019

In this paper, IoT based thermal sensor data and image sensor integrated environmental monitoring system for ship, and it is the monitoring system which can process and transmit the Full HD IP camera image and thermal data transmitted from the thermal module for processing and transmitting, and the viewer S/W is to be developed which provides in real time the information for actual surrounding temperature together with the image, and enables fire prediction which was impossible in the case of the existing equipment by estimating the temperature change as the thermal image is added to the image camera, and saves and analyzes all data while receiving the temperature data and image signal transmitted from the integrated thermal sensor environmental monitoring equipment for ship and displaying them as 2D on the monitoring system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1435-1440
• /
• 2010

This paper presents encrypted secret code recording system which can insert an unique manufacture ID code after complete disc process. First, we detect a memory block synchronizing signal which is SYNC. by using FPGA, then, design a recording pattern to write Multi Pulse. Finally, a method that any data is recorded in any place in any data area of optical disc by using a FPGA was proposed. Newly proposed method in this paper that any user records user data in protected data areas on digital video optical discs, can be very useful for effective software copy protection, and can be applicable to encrypted record on high density DVD in near future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.327-338
• /
• 1993

This paper proposes a novel method for deriving the Fourier transform pairs of high order pulses given in a generalized form. Primarily, modifying the PRS system model, we establish a new model which simplifies the process of Fourier analysis of the n-th order pulse signal, resulting in a representative relationship. In succession, we present the Frame Formula which plays a role of substituent for the parameters in table look-up procedures. Each look-up table contains all the parameters needed to obtain the Fourier transform of the corresponding pulse of any order. Regarding the amount of calculations and the complexity of procedures required to derive the transforms of pulse signals, analytically or numerically, this method is more compact and timesaving than conventional methods. When pulse has a much narrow width of equivalently higher the order of several pulses, the method presented here acts to the best of its true merit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.65-76
• /
• 2004

In this paper, a novel preamble structure, including a synchronization preamble and a cell search preamble, is proposed for OFDM-based cellular systems. An efficient algorithm for downlink synchronization and cell searching using the preamble is also proposed. The synchronization process includes the initial symbol timing estimation using continuously, or at least, periodically transmitted downlink signal, frame synchronization, the fine symbol timing estimation, and the frequency offset estimation using the synchronization preamble, and the cell identification using the cell searching preamble. Performance of each synchronization and cell searching step is analyzed and the analytic results including the overall performance of the synchronization and cell searching are verified by computer simulation. It is shown that the proposed preamble with the corresponding synchronization and cell searching algorithm can provide very robust synchronization and cell searching capability even in bad cellular environments.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.103-113
• /
• 2010

In this paper, a tradeoff between the total energy consumption-per-bit and the end-to-end rate under spatial reuse in wireless multi-hop network is developed and analyzed. The end-to-end rate of the network is the number of information bits transmitted (end-to-end) per channel use by any node in the network that is forwarding the data. In order to increase the bandwidth efficiency, spatial reuse is considered whereby simultaneous relay transmissions are allowed provided there is a minimum separation between such transmitters. The total energy consumption-per-bit includes the energy transmitted and the energy consumed by the receiver to process (demodulate and decoder) the received signal. The total energy consumption-per-bit is normalized by the distance between a source-destination pair in order to be consistent with a direct (single-hop) communication network. Lower bounds on this energy-bandwidth tradeoff are analyzed using convex optimization methods. For a given location of relays, it is shown that the total energy consumption-per-bit is minimized by optimally selecting the end-to-end rate. It is also demonstrated that spatial reuse can improve the bandwidth efficiency for a given total energy consumption-per-bit. However, at the rate that minimizes the total energy consumption-per-bit, spatial reuse does not provide lower energy consumption-per-bit compared to the case without spatial reuse. This is because spatial reuse requires more receiver energy consumption at a given end-to-end rate. Such degraded energy efficiency can be compensated by varying the minimum separation of hops between simultaneous transmitters. In the case of equi-spaced relays, analytical results for the energy-bandwidth tradeoff are provided and it is shown that the minimum energy consumption-per-bit decreases linearly with the end-to-end distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.633-639
• /
• 2009

For operation of IEEE 802.22 WRAN system, spectrum sensing is a essential function. However, due to strict sensing requirement of WRAN system, spectrum sensing process of CR nodes require long quiet period. In addition, CR nodes sometimes fail to detect licensed users due to shadowing effect of wireless communication environment. To overcome this problem, CR nodes collaborate with each other for increasing the sensing reliability or mitigating the sensitivity requirement. A general approach for decision fusion, the "k out of N" rule is often taken as the decision fusion rule for its simplicity. However, since k out of N rules can not achieve better performance than the highest SNR node when SNR is largely different among CR nodes, the local SNR of each node should be considered to achieve better performance. In this paper, we propose two novel data fusion methods by utilizing confidence vector which represents the confidence level of individual sensing result. The simulation results show that the proposed schemes improve the signal detection performance than the conventional data fusion algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.434-439
• /
• 2008

This paper proposes an efficient coarse frequency synchronizer for digital video broadcasting - second generation (DVB-S2). The input signal requirement of acquisition range for coarse frequency estimator in the DVB-S2 is around ${\pm}1.5625Mhz$, which corresponds to 6.25% of the symbol rate at 25Mbaud. At the process of analyzing the robust algorithm among data-aided approaches, we find that the Luise & Reggiannini (L&R) algorithm is the most promising one for coarse frequency estimation with respect to estimation performance and complexity. However, it requires many multipliers and adders to compute output values of correlators. We propose an efficient architecture identifying the serial correlator with the buffer and multiplexers. The proposed coarse frequency synchronizer can reduce the hardware complexity about 92% of the direct implementation. The proposed architecture has been implemented and verified on the Xilinx Virtex II FPGA.