• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.285-285
• /
• 2008

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.313-320
• /
• 2011

100 nm-thick hydrogenated amorphous silicon $({\alpha}-Si:H)$ films were deposited on a glass and glass/30 nm Ni substrates by inductively-coupled plasma chemical vapor deposition (ICP-CVD) at temperatures ranging from 100 to $550^{\circ}C$. The sheet resistance, microstructure, phase transformation and surface roughness of the films were characterized using a four-point probe, AFM (atomic force microscope), TEM (transmission electron microscope), AES (Auger electron spectroscopy), HR-XRD(high resolution X-ray diffraction), and micro-Raman spectroscopy. A nano-thick NiSi phase was formed at substrate temperatures >$400^{\circ}C$. AFM confirmed that the surface roughness did not change as the substrate temperature increased, but it increased abruptly to 6.6 nm above $400^{\circ}C$ on the glass/30 nm Ni substrates. HR-XRD and micro-Raman spectroscopy showed that all the Si samples were amorphous on the glass substrates, whereas crystalline silicon appeared at $550^{\circ}C$ on the glass/30 nm Ni substrates. These results show that crystalline NiSi and Si can be prepared simultaneously on Ni-inserted substrates.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1568-1570
• /
• 2009

Nanocrystalline silicon thin films were deposited using an internal-type inductively coupled plasma-chemical vapor deposition at room temperature by varying the bias power to the substrate and the structural characteristics of the deposited thin film were investigated. The result showed that the crystalline volume fraction was decreased with the increase of bias power. At the low bias power range of 0~60 W, the compress stress in the deposited thin film was in the range of -34 ~ -77 Mpa which is generally lower than the residual stress observed for the nanocrystalline silicon thin films deposited by capacitively coupled plasma.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1159-1163
• /
• 2006

Aluminum nanotube has been fabricated by a physical vapor deposition/atmospheric pressure injection using an anodic porous alumina film as a template. The pore external-, and inside diameters and the length of the aluminum nanotubes fabricated by this method are 60 nm, 35 nm and 2 $\mu$m, respectively. The structure of the fabricated aluminum nanotubes was examined by a kind of chemical treatment as extraction of copper on the cross-sectional area of these aluminum tubes in a mixed solution of $CuCl_2$ and HCl by difference of ionization tendency between aluminum and copper. The composition of the aluminum nanotube was identified by the two dimensional Hybrid Plasma Equipment Model (HPEM) employing the inductively coupled plasma.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.93-94
• /
• 2005

본 연구에서는 저온 공정에서 제작되는 소자에의 응용을 위하여 Inductively Coupled Plasma Chemical Vapor Deposition(ICP-CVD) 내에서 $N_2O$ 기체를 활용한 plasma oxidation을 통한 silicon 표면의 oxynitridation과 이로부터 tunnel gate dielectirics로 사용될 SiON 층을 형성하였으며, 형성된 SiOxNy 층의 전기적 특성을 측정하여 tunnel gate dielectrics로서 효과적인 기능을 수행함을 확인하였다. 형성된 박막의 성분 분석을 위하여 energy dispersive spectroscopy(EDS)를 이용하여 SiOxNy 층의 생성을 확인하였으며, 전기적인 특성을 통하여 tunnel gate dielectrics의 기능을 수행함을 알 수 있었다. 형성된 SiOxNy 층은 초박막 형태임에도 절연막으로서의 기능을 나타내었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.157-158
• /
• 2007

Tin oxide films were successfully crystallized without additional heating by inductively coupled plasma assisted chemical vapor deposition (ICP-CVD). The degree of crystallization was affected by the ICP power, hydrogen flow and ion bombardment induced by negative substrate bias. The substrate temperature was increased only up to $150^{\sim}180^{\circ}C$ by plasma heating, which suggests that the formation of $SnO_2$ crystalswas caused by enhanced reactivity of precursors in high density plasma. The hardness of deposited tin oxide films ranged from 5.5 to 11GPa at different hydrogen flow rates.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.8
• /
• pp.6-14
• /
• 2006

This paper is a study about a proper method of plasma generation to cleaning method and a high frequency power equipment circuit to generation of plasma that used cleaning of chamber for TFT-LCD PECVD. The high density plasma required for cleaning causes a possibility of high density plasma more than $1{\times}10^{11}[EA/cm^3]$. It apply a ferrite core of ferromagnetic body to a existing ICP form. In case of power transfer equipment on 400[kHz] high frequency to generation of plasma it makes certain a stable switching operation in condition of plasma through using a inverter form for general purpose HB. And it demonstrates the performance of power transfer equipment using methods of measurement which use a transformer of series combination the density of plasma and the rate of dissolution of $NF_3$ in condition of $A_r\;and\;NF_3$.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1203-1204
• /
• 2008

본 논문에서는 ICP-CVD(Inductively Coupled Plasma Chemical Vapor Deposition)를 이용해 기판을 가열하지 않고 증착한 $SiO_2$ 절연막의 플라즈마 처리 효과를 분석하였다. 플라즈마 처리를 하지 않은 $SiO_2$ 절연막의 경우 평탄화 전압이 -7.8V, 유효 전하 밀도가 $4.77{\times}10^{13}cm^2$로 열악한 특성을 보였다. 이를 개선하기 위해 헬륨 플라즈마 전처리(Pre-treatment)와 수소 플라즈마 후처리(Post-treatment)를 통해서 $SiO_2$ 절연막의 전기적인 특성을 개선하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.161-162
• /
• 2006

Scaling rules for TFT application devices have led to the necessity of ultra thin dielectric films and high-k dielectric layers. In this paper, The advantages of high concentration of nitrogen in silicon oxide layer deposited by using $N_2O$ in Inductively Coupled Plasma Chemical Vapor Deposition (ICP-CVD) reported about Ellipsometric measurement, Capacitance-Voltage characterization and processing conditions.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.130-135
• /
• 2003

Low dielectric constant SiOC(-H) films have been prepared by inductively coupled plasma chemical vapor deposition using bis-trymethylsilyl-methane (BTMSM) and $O_2$ precursors. The annealing effects on the structural and electrical properties were studied. The results indicate post-annealing could efficiently remove the hydroxyl (-OH) related groups from the as-deposited films and cause the chemical structure re-arrangement, resulting in the more nano-pores being formed in the annealed SiOC(-H) films. The dielectric constant decreased from 2.7 to 2.1, and the refractive index decreased from 1.427 to 1.32.