• Title/Summary/Keyword: IT Needs

Search Result 14,553, Processing Time 0.043 seconds

Assessment of Water Control Model for Tomato and Paprika in the Greenhouse Using the Penman-Monteith Model (Penman-Monteith을 이용한 토마토와 파프리카의 증발산 모델 평가)

  • Somnuek, Siriluk;Hong, Youngsin;Kim, Minyoung;Lee, Sanggyu;Baek, Jeonghyun;Kwak, Kangsu;Lee, Hyondong;Lee, Jaesu
    • Journal of Bio-Environment Control
    • /
    • v.29 no.3
    • /
    • pp.209-218
    • /
    • 2020
  • This paper investigated actual crop evapotranspiration (ETc) of tomato and paprika planted in test beds of the greenhouse. Crop water requirement (CWR) is the amount of water required to compensate ETc loss from the crop. The main objectives of the study are to assess whether the actual crop watering (ACW) was adequate CWR of tomato and paprika and which amount of ACW should be irrigated to each crop. ETc was estimated using the Penman-Monteith model (P-M) for each crop. ACW was calculated from the difference of amount of nutrient supply water and amount of nutrient drainage water. ACW and CWR of each crop were determined, compared and assessed. Results indicated CWR-tomato was around 100 to 1,200 ml/day, while CWR-paprika ranged from 100 to 500 ml/day. Comparison of ACW and CWR of each crop found that the difference of ACW and CWR are fluctuated following day of planting (DAP). However, the differences could divide into two phases, first the amount of ACWs of each crop are less than CWR in the initial phase (60 DAP) around 500 ml/day and 91 ml/day, respectively. Then, ACWs of each crop are greater than the CWR after 60 DAP until the end of cultivation approximately 400 ml/day in tomato and 178 ml/day in paprika. ETc assessment is necessary to correctly quantify crop irrigation water needs and it is an accurate short-term estimation of CWR in greenhouse for optimal irrigation scheduling. Thus, reducing ACW of tomato and paprika in the greenhouse is a recommendation. The amount of ACW of tomato should be applied from 100 to 1,200 ml/day and paprika is 100 to 500 ml/day depend on DAP.

Quality characteristics and preparing of solid starter using fungal strains for Takju (탁주용 곰팡이 고체종국 제조 및 품질 특성)

  • Baek, Chang-Ho;Baek, Seong Yeol;Mun, Ji-Young;Choi, Han-Seok;Kang, Ji-Eun;Jung, Seok-Tae;Yeo, Soo-Hwan
    • Food Science and Preservation
    • /
    • v.23 no.6
    • /
    • pp.797-803
    • /
    • 2016
  • In this study, we investigated the effect of fermentation conditions on the amylolytic and proteolytic activities of Aspergillus luchuensis strain 74-5 and Aspergillus oryzae strain 75-2, which are used in the preparation of the starter culture, for Takju (Korean traditional rice wine). The starter culture was optimized using different conditions, such as inoculum size, inoculation temperature, and incubation time. The enzyme activities under each condition were measured. In the A. luchuensis strain 74-5 starter culture, the ${\alpha}-amylase$ and glucoamylase activities increased, however the activity of acidic protease decreased as the diluent to starter culture ratio increased. In the A. oryzae 75-2 starter culture, all enzyme activities were maintained at a higher level even at 5% inoculation ratio. Higher enzyme activities were observed in the middle range of inoculation temperature (35, $40^{\circ}C$), than in the lower range (20, $30^{\circ}C$). Enzyme activity in the starter culture varied with incubation time, however it was the highest at 144 and 120 hr, respectively, for A. luchuensis strain 74-5 and A. oryzae strain 75-2. The spore count of the starter culture was approximately $2{\times}10^7$ during fermentation, out of which contamination by aerobic bacteria was about $3{\times}10^3$. The results suggested that the starter culture of each strain could be used as an inoculum for fermentation. However, we needs to conduct further research for the selection of suitable diluting agents as well as drying methods to reduce the contamination by aerobic bacteria, while retaining the enzyme activity.

Factors Influencing the Knowledge of Health Insurance Standard and Health Insurance Application (요양급여비용 산정기준의 지식수준과 건강보험 실무적용에 영향을 미치는 요인)

  • Lee, Soon-Young;Lim, Soon-Ryun
    • Journal of dental hygiene science
    • /
    • v.15 no.6
    • /
    • pp.815-824
    • /
    • 2015
  • This study aims to figure out the current state of health insurance education provided to dentists and personnel in charge of insurance claim as well as the effects of experiences in education on their knowledge of health insurance standard and actual application. As a result of analysis on 100 data sheets related to dentistry and 100 data sheets related to personnel in charge of insurance claim (a total of 200 data sheets), following results were generated. Insurance claim personnels showed higher score than dentist in knowledge of health insurance standard and it was significant statistically. Knowledge of insurance claim personnel showed significant differences in educational experiences, in health insurance for the latest three years and average hours of education per session whereas that of dentists did not indicate any significant differences. The level of practical application of dentists was significantly different (p<0.05) according to experiences in insurance claim, and that of insurance claim personnel significantly varied (p<0.05) depending on age, experiences of insurance education and average hours of education. The longer average hours of education, the higher level of practical application. Experiences of insurance education turned out to affect on the knowledge of health insurance standard significantly (p<0.05) on the part of dentists and insurance claim personnel, and the level of experiences in insurance claim and knowledge of health insurance standard on the part of dentists and insurance claim personnel turned out to affect on practical application significantly (p<0.001). Judging from the result, continuous education needs to be conducted in order to enable dentists and insurance claim personnel to maintain the level of knowledge about health insurance and practical application.

Microbial quality of fresh vegetables in restaurants around school (학교주변식당 신선 채소류의 미생물 오염도 조사)

  • Jo, So Hyun;Chung, Hyun-Jung;Lee, Seong Hee;Hwang, Su Jung;Om, Ae-Son;Eun, Jong-Bang
    • Food Science and Preservation
    • /
    • v.20 no.3
    • /
    • pp.424-428
    • /
    • 2013
  • Microbiological contamination of 4 vegetables (garlic, red pepper, perilla leaf and lettuce) collected from 10 restaurants around university was examined. The vegetables were evaluated for total plate count, coliforms, psychrophiles, yeast, and Staphylococcus aureus. The results of total plate count showed the highest value as $5.4{\pm}0.69$ log CFU/g in lettuce, following by $4.8{\pm}1.53$ log CFU/g in red pepper, $4.5{\pm}1.65$ log CFU/g in perilla leaf and $3.4{\pm}1.27$ log CFU/g in garlic. The contamination level of coliforms and psychrophiles were highest in red pepper with maximum as 4.7 log CFU/g and 8.2 log CFU/g, respectively. Red pepper of psychrophiles showed the highest average value as $5.0{\pm}1.82$ log CFU/g followed by $4.2{\pm}1.91$ log CFU/g in lettuce, $4.7{\pm}1.55$ log CFU/g in perilla leaf and $2.4{\pm}2.10$ log CFU/g in garlic. The average number of yeasts were highest in perilla leaf with $4.4{\pm}1.41$ log CFU/g and were lowest in garlic with $0.9{\pm}1.41$ log CFU/g. The contamination level of S. aureus was detected in 27 samples among the total 40 samples with the range of 0.5-5.2 log CFU/g. In conclusion, the microbial quality of the fresh vegetables evaluated in this study was not very good. Therefore, it needs to be enhanced through the good sanitation management and production and distribution methods to improve the safety of fresh vegetables.

Study on Vascular Plants of the Gosan Recreational Forest in Jeonbuk -A Case Study of Wild Plants except Planted Plants- (전북 고산자연휴양림 일대의 관속식물상 연구 -식재종을 제외한 야생식물을 중심으로-)

  • Kim, Young-Ha;Beon, Mu-Sup;Oh, Hyun-Kyung
    • Korean Journal of Plant Resources
    • /
    • v.19 no.5
    • /
    • pp.617-627
    • /
    • 2006
  • The wild plants of the studied area in the Gosan recreational forest was listed 327 taxa: 99 families, 252 genera, 289 species,1 subspecies, 34 varieties and 3 forms. Based on the list of the rare plants by the Forest Research Institute, 2 taxa were recorded in the studied areas; Lilium distichum (Presevation priority order: No. 159), Aristolochia contorta (No. 151) and based on the list of Korean endemic plants, 4 taxa were recorded; Cephalotaxus koreana, Carex okamotoi, Salix purpurea var. japonica, Weigela subsessilis. Specific plant species by floral region were total 21 taxa; 2 taxa (Asperula lasiantha, Lonicera subhispida) in class III, 4 taxa (Lilium distichum, Potentilla dickinsii, Caryopteris incana, Ligularia fischeri) in class II, 15 taxa (Hosta capitata, Alnus hirsuta, Ribes mandshuricum, Cayratia japonica, Vaccinium oldhami, etc.) in class I. The naturalized plants in this site were 12 families, 28 genera, 31 species, 1 varieties, 32 taxa and naturalization rate was 9.8%. So, wild plants disturbing ecosystem like Ambrosia artemisiifolia var. elatior have been increasing and it needs continuing control and conservation measures on the plant ecosystem.

Pelvic MRI Application to the Dosimetric Analysis in Brachytherapy of Uterine Cervix Carcinoma (자궁경부암의 강내조사치료에 있어서 흠수선량평가시 골반강 자기공명사진의 응용)

  • Chung, Woong-Ki;Nah, Byung-Sik;Ahn, Sung-Ja
    • Radiation Oncology Journal
    • /
    • v.15 no.1
    • /
    • pp.57-64
    • /
    • 1997
  • Purpose : Before we report the results of curative radiotherapy in cervix cancer patients, we review the significance and safety of our dose specification methods in the brachytherapy system to have the insight of the potential Predictive value of doses at specified points. Matersials and Methods : We analyze the 리5 cases of cervix cancer patients treated with intracavitary brachytherapy in the lateral simulation film we draw the isodose curve and observe the absorbed dose rate of point A, the reference point of bladder(SBD) and rectum(SRD). In the sagittal view of Pelvic MRI film we demarcate the tumor volume(TV) and determine whether the prescription dose curve of point A covers the tumor volume adequately by drawing the isodose curve as correctly as possible. Also we estimate the maximum Point dose of bladder(MBD) and rectum(MRD) and calculate the inclusion area where the absorbed dose rate is higher than that of point A in the bladder(HBV) and rectum(HRV), respectively. Results : Of forty-five cases, the isodose curve of point A seems to cover tumor volume optimally in only 24(53%). The optimal tumor coverage seems to be associated not with the stage of the disease but with the tumor volume. There is no statistically significant association between SBD/SRD and MBD/MRD, respectively. SRD has statistically marginally significant association with HRV, while TV has statistically significant association with HBV and HRV. Conclusion : Our current treatment calculation methods seem to have the defect in the aspects of the nonoptimal coverage of the bulky tumor and the inappropriate estimation of bladder dose. We therefore need to modify the applicator geometry to optimize the dose distribution at the position of lower tandem source. Also it appears that the position of the bladder in relation to the applicators needs to be defined individually to define 'hot spots'.

  • PDF

Satisfaction Factor Analysis on Foodservice Quality for Employee Grouped by Working Types 1. Analysis of Expectation and Perception, Satisfaction (사업체 급식서비스 품질의 업무형태별 만족요인 분석 1. 기대도, 인식도 및 품질만족도 조사)

  • 김신자;김명애
    • Korean journal of food and cookery science
    • /
    • v.16 no.5
    • /
    • pp.437-444
    • /
    • 2000
  • The purpose of this study were to identify customer expectation, perception and satisfaction of foodservice quality to analyze the influencing factors on foodservice quality and finally to provide basic information for the improvement of foodservice quality. Among expectation scores of food quality attributes, ‘hygiene of food(3.27)’received the highest score. In expectation scores of service quality attributes,‘hygiene of tableware(3.40)’was the most important. Satisfaction of ‘appropriate 1 portion size(-0.11)’was the highest scored, while‘dealing with complaints on meals(-0.70)’was the most dissatisfied one. Satisfaction was highly correlated with‘providing preferred menu(r = -0.62)’of food quality expectation. It was highly correlated with‘dealing with complaints on meals(r = -0.61)’of service quality expectation. Expectation and perception of foodservice as 2.25 and 2.90 out of 5, respectively, which suggests that foodservice needs to be improved. The attributes identified in Quadrant A, which was labelled‘focus here’and supposed to indicate the areas of high expectation but in low perception, was hygiene of carts holding used trays. The results of expectation and perception analysis indicated the areas that the attention of management should be given to improve quality of foodservice. The stepwize regression analysis suggested that foodservice expectation and perception explaints around 56.7% of the variation in general customer satisfaction.

  • PDF

A Survey on the Perceptions of Consumer Organizations to Promote Risk Communication for Food Additives (식품첨가물의 리스크 커뮤니케이션 촉진을 위한 소비자단체의 인식조사)

  • So, Yun-Ji;Kim, Suna;Lee, Jee-Hyeon;Park, Eun-Young;Kim, Hee-Jung;Kim, Ji-Sun;Kim, Jeong-Weon
    • Korean journal of food and cookery science
    • /
    • v.29 no.2
    • /
    • pp.105-113
    • /
    • 2013
  • Consumer organizations usually lead the opinions of the consumers. This study was performed to investigate the perceptions and information needs of consumer organizations on food additives for the promotion of risk communication. A survey was conducted for 4 weeks in March 2012 by using a self-administered questionnaire consisting of 32 questions. Total 111 responses were collected for analysis. 'Safety (91.0%)' was the most important factor influencing the purchase of processed food, and both 'food additives (24.3%)' and 'environmental pollution (23.4%)' were considered as main risk factors. The longer the career of the members had, the higher negative perceptions on food additives (p<0.01). About 70% of the respondents who had known KFDA's researches on evaluating safety of food additives answered that researches were not enough to make sure the safety. Although lectures and other domestic organization were the main channels for getting information, 'TV' was considered as the most suitable way for it. 'Poor risk communication (32.4%)' was pointed out as the serious problem of government's food safety policy. Based on these results, consumer organizations' low level of trust on government should be overcome by continuous supply of information what they need to facilitate risk communication on food additives.

An Inquiry into the Meaning of Experience of Action Learning Program for Participants in Coporate Job Training: F.G.I Approach (기업체 직무교육 참여자의 액션러닝프로그램 경험의미 탐색:F.G.I접근)

  • Kim, Yeon-Chul
    • The Journal of the Korea Contents Association
    • /
    • v.14 no.9
    • /
    • pp.598-612
    • /
    • 2014
  • The present study is aimed at inquiring into the meaning of experience of action learning program for adult learners who participated in action learning program of H financial company which was carried out as a means of corporate training. The goal of study is to examine the essential factors of action learning program impacting on the increase of motivation for learning and the improvement of job-related problem-solving ability of the learners who participated in the learning as well as on the increase of motivation for learning and the improvement of job-related problem-solving ability among the components of action learning program. As for research method, 3 main questions and 15 sub-questions about motivation for learning, job-related problem-solving ability, and components of action learning were prepared for 9 learners who participated in the action learning program, and then focus group interviews (F.G.I) were conducted. The results show that action learning program increased motivation for learning by combining concentration of attention and relevance to job, and the degree of organization of learning team was a key element to improving motivation for learning. Also, through development of alternatives and planning/execution, it impacted on improving job-related problem-solving ability of participants. And the interest and support of the administrator were key elements to improving job-related problem-solving ability. In conclusion, the results show that action learning program in corporate job training activities improves motivation for learning of the participants. Therefore, in order to improve job-related problem-solving ability of the participants in job training, more focus should be put on concentration of attention and reinforcement of relevance to the job and more interest and support should be given to organization of appropriate learning teams among components of action learning program. Along with this, the administrator needs to grasp participants' awareness of problems and pay attention and give support to the participants to enhance the performance of planning/execution.

Effect of Inhomogeneity correction for lung volume model in TPS (Lnug Volume을 모델로 한 방사선치료계획 시 불균질 조직 보정에 따른 효과)

  • Chung SeYoung;Lee SangRok;Kim YoungBum;Kwon YoungHo
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.16 no.1
    • /
    • pp.57-65
    • /
    • 2004
  • Introduction : The phantom that includes high density materials such as steel was custom-made to fix lung and bone in order to evaluation inhomogeneity correction at the time of conducting radiation therapy to treat lung cancer. Using this, values resulting from the inhomogeneous correction algorithm are compared on the 2 and 3 dimensional radiation therapy planning systems. Moreover, change in dose calculation was evaluated according to inhomogeneous by comparing with the actual measurement. Materials and Methods : As for the image acquisition, inhomogeneous correction phantom(Pig's vertebra, steel(8.21g/cm3), cork(0.23 g/cm3)) that was custom-made and the CT(Volume zoom, Siemens, Germany) were used. As for the radiation therapy planning system, Marks Plan(2D) and XiO(CMS, USA, 3D) were used. To compare with the measurement value, linear accelerator(CL/1800, Varian, USA) and ion chamber were used. Image, obtained from the CT was used to obtain point dose and dose distribution from the region of interest (ROI) while on the radiation therapy planning device. After measurement was conducted under the same conditions, value on the treatment planning device and measured value were subjected to comparison and analysis. And difference between the resulting for the evaluation on the use (or non-use) of inhomogeneity correction algorithm, and diverse inhomogeneity correction algorithm that is included in the radiation therapy planning device was compared as well. Results : As result of comparing the results of measurement value on the region of interest within the inhomogeneity correction phantom and the value that resulted from the homogeneous and inhomogeneous correction, gained from the therapy planning device, margin of error of the measurement value and inhomogeneous correction value at the location 1 of the lung showed $0.8\%$ on 2D and $0.5\%$ on 3D. Margin of error of the measurement value and inhomogeneous correction value at the location 1 of the steel showed $12\%$ on 2D and $5\%$ on 3D, however, it is possible to see that the value that is not correction and the margin of error of the measurement value stand at $16\%$ and $14\%$, respectively. Moreover, values of the 3D showed lower margin of error compared to 2D. Conclusion : Revision according to the density of tissue must be executed during radiation therapy planning. To ensure a more accurate planning, use of 3D planning system is recommended more so than the 2D Planning system to ensure a more accurate revision on the therapy plan. Moreover, 3D Planning system needs to select and use the most accurate and appropriate inhomogeneous correction algorithm through actual measurement. In addition, comparison and analysis through TLD or film dosimetry are needed.

  • PDF